顺丁烯二酸二异辛酯的合成

以顺丁烯二酸酐和异辛酯为原料，用对甲苯磺酸作催化剂合成顺丁烯二酸二异辛酯。用正交试验确定了酯化反应的优化条件，酯化率达97．96％．     

高分子玻璃化转变过程的分子动力学模拟本科教学实验

玻璃化转变是高分子专业教学中的重要内容,转变过程中自由体积的变化和分子链段的运动是理解玻璃化转变的难点。在计算机上使用分子模拟的方法得到三维的可视化图形,可以更直观地观察到自由体积和分子链的变化。提炼近年分子模拟技术在玻璃化转变研究中的最新科研成果,得到既有理论基础又适合本科教学的课程素材。分子模拟可以实现了仪器测试无法达到的超快速升降温,并与仪器测试得到的实验结果相对照,验证了普通实验很难验证的理论观点,从而拓展了本科实验的范围,达到了很好的教学效果。     

To what extent can an uncertainty calculation be general?

 It is argued that results of uncertainty calculations in chemical analysis should be taken into consideration with some caution owing to their limited generality. The issue of the uncertainty in uncertainty estimation is discussed in two aspects. The first is due to the differences between procedure-oriented and result-oriented uncertainty assessments, and the second is due to the differences between the theoretical calculation of uncertainty and its quantication using the validation (experimental) data. It is shown that the uncertainty calculation for instrumental analytical methods using a regression calibration curve is result-oriented and meaningful only until the next calibration. A scheme for evaluation of the uncertainty in uncertainty calculation by statistical analysis of experimental data is given and illustrated with examples from the author's practice. Some recommendations for the design of corresponding experiments are formulated.     

PVC DISULFIDE AS CATHODE MATERIALS FOR SECONDARY LITHIUM BATTERIES

PVC disulfide (2SPVC) was synthesized by solution crosslink and its molecular structure was confirmed by infrared spectrum. 2SPVC's specific area is 36.1 m2·g-1 tested by stand BET method, and granularity experiment gives out the particle size of d0.5= 11.3μm. With SEM (Scanning Electron Microscope) experiment the surface morphology and particle shape of 2SPVC were observed. Cyclic voltammetry (scan rate: 0.5 mV·s-1) shows that 2SPVC experience an obvious S-S redox reaction in charge-discharge process. When 2SPVC was used as cathode material for secondary lithium battery in a 1 mol·L-1 solution of lithium bis(trifluoromethylsulfonyl) imide (Li(CF3SO2)2N) in a 5:45:50 volume ratio mixture of o-xylene (oxy), diglyme (DG) and dimethoxymethane (DME) at 30℃, the first discharge capacity of 2SPVC is about 400.3 mAh·g-1 which is very close to its theoretical value (410.5 mAh·g-1) at a constant discharge current of 15 mA·g-1. It can retain at about 346.1 mAh·g-1 of discharge capacity after 30 charge-discharge cycles. So 2SPVC is a very promising cathode candidate for rechargeable lithium batteries.     

热敏电阻温度计的设计与制作

本文介绍了设计性实验“热敏电阻的设计与制作”的实施情况。说明了只要选题合适、要求恰当,设计性实验不仅可行,而且对物理实验训练的总结提高十分有效。     

热致液晶乙基纤维素与尼龙－1010共混物的研究

在自制单螺杆小型挤出机上通过熔融共混的办法，制备了不同配比（５／９５—２５／７５）的ＥＣ／Ｎｙｌｏｎ—１０１０共混物．用ＷＡＸＤ、ＤＳＣ、毛细管流变仪、力学性能测试等方法对共混物进行了研究．发现共混后尼龙－１０１０的形态结构有明显改变，其强度、模量都有提高，在高剪切速率下，共混物粘度大大降低．配比为１５８５时，这些性能的改进尤为明显．     

络合滴定法测定钙含量微型实验研究

利用微型滴定法测定含钙制品中的Ca2 含量,并对微型滴定法与常量滴定法的平行测定结果进行了比较。结果两种方法无显著性差异,F检验t检验结果均在允许范围内,相对偏差均小于2.0%,微型滴定法的精度达到常量滴定法测定水平,能满足化学分析要求。     

精品课程教材《高分子物理实验》建设的体会——三个及时融入

中国科学技术大学"高分子物理实验"课程是2006年安徽省精品课程,作者结合教学研究和精品课程建设经验,总结出了"三个及时融入"的教材建设理念,本文结合实例对该理念的具体含义进行了阐述.     

凝胶网格沉淀法制备纳米氧化锌的正交实验研究

通过凝胶网格沉淀法制备了纳米氧化锌,并通过正交实验探讨了明胶用量、锌离子浓度、碳酸根离子浓度以及反应物配比等因素对其粒径的影响。实验确定了制备纳米氧化锌的优化工艺条件:明胶用量22%、锌离子浓度0.7mol/L、碳酸根浓度0.7mol/L、反应物配比1/1。采用XRD、IR、TG-DTA、TEM及激光粒度等测试手段对产物进行了表征。结果表明,在优化工艺条件下制得了粒径为40nm的氧化锌。     

微波辐射下双(2-苯并咪唑基)丙烷的合成与结构表征

与传统加热相比较,微波辐射促进的有机合成反应具有加热时间短、节能、产率高、不使用或少使用溶剂而对环境友好和节约成本等优点[1]。苯并咪唑类化合物具有广泛的生物活性而被应用到仿生有机合成、遗传学染色体研究及单层膜合成与形态研究的领域[2～4]。苯并咪唑类化合物的传统合成方法是:在HC1、多聚磷酸(PPA)、H3BO3等酸性催化剂使用下加热回流有机酸与邻苯二胺的混合物,然而反应通常需要较高的压力、温度或较长的时间,副反应多[5]。本研究在微波辐射下,以戊二酸和邻苯二胺为原料、PPA为催化剂合成了双(2-苯并咪唑基)丙烷,用正交试…