Step bunching to step-meandering transition induced by electromigration on Si(1 1 1) vicinal surface

The step configuration of a vicinal Si surface is studied under electromigration and a gradient of temperature. An abrupt transition (ΔT = 4 °C) from step-meandering to step bunching is found at 1225 °C for a step-down direct-current direction. This transition starts by random fluctuations which then extend on the whole surface. The transition is studied in the framework of a linear stability analysis of the usual Burton-Cabrera-Frank model by comparing the amplification factors of step-meandering and step bunching instabilities. Both compete at a given temperature, but since the amplification factors behave differently with temperature, bunching abruptly supersedes meandering above a critical temperature.     

Direct observations of the leaching of a simulated nuclear waste glass in a radiation environment

The durability of the media proposed for the containment of commercial nuclear waste will be affected not only by the differences in groundwater composition that they might encounter but also by the changes that their own irradiation fields will make to these solutions. Experimental results that question the ability of current leaching experiments to predict the stability of nuclear waste composites are presented.     

Template‐Engaged Solid‐State Synthesis of Barium Magnesium Silicate Yolk@Shell Particles and Their High Photoluminescence Efficiency

This study presents a new synthetic method for fabricating yolk@shell‐structured barium magnesium silicate (BMS) particles through a template‐engaged solid‐state reaction. First, as the core template, (BaMg)CO₃ spherical particles were prepared based on the coprecipitation of Ba²⁺ and Mg²⁺. These core particles were then uniformly shelled with silica (SiO₂) by using CTAB as the structure‐directing template to form (BaMg)CO₃@SiO₂ particles with a core@shell structure. The (BaMg)CO₃@SiO₂ particles were then converted to yolk@shell barium magnesium silicate (BMS) particles by an interfacial solid‐state reaction between the (BaMg)CO₃ (core) and the SiO₂ (shell) at 750 °C. During this interfacial solid‐state reaction, Kirkendall diffusion contributed to the formation of yolk@shell BMS particles. Thus, the synthetic temperature for the (BaMg)SiO₄:Eu³⁺ phosphor is significantly reduced from 1200 °C with the conventional method to 750 °C with the proposed method. In addition, the photoluminescence intensity of the yolk@shell (BaMg)SiO₄:Eu³⁺phosphor was found to be 9.8 times higher than that of the conventional (BaMg)SiO₄:Eu³⁺ phosphor. The higher absorption of excitation light by the structure of the yolk@shell phosphor is induced by multiple light‐reflection and ‐scattering events in the interstitial void between the yolk and the shell. When preparing the yolk@shell (BaMg)SiO₄:Eu³⁺ phosphor, a hydrogen environment for the solid‐state reaction results in higher photoluminescence efficiency than nitrogen and air environments. The proposed synthetic method can be easily extended to the synthesis of other yolk@shell multicomponent metal silicates.     

Inducing anisotropy in bulk Nd-Fe-Co-Al-B nanocrystalline alloys by quenching in magnetic field

We have observed magnetic anisotropy in bulk Nd_55−xCo_xFe₃₀Al₁₀B₅ (x=10, 15 and 20) alloys prepared by copper mold suction casting method with a presence of external magnetic field (quenching field) μ₀H=0.25 T. By changing direction of the measuring field from perpendicular to parallel one in comparison with that of the quenching field, coercive force of the alloys slightly decreases while remanent magnetization and squareness of hysteresis loop increase more clearly. It is also found that the higher Co-concentration in the alloys the larger magnetic anisotropy is induced. The structure analyses manifest nanocrystalline particles embedded in residual amorphous matrix of the alloys. The size of the particles is in range of 10-30 nm and their crystalline phases consist of Nd₂(Fe,Co)₁₄B, Nd₃Co, Nd₃Al, NdAl₂ and Nd.     

常压下玉米秸秆液化工艺的优化及其生物油分析

随着化石能源的日益短缺，可再生木质生物质资源的利用越来越受到重视，常压液化技术是生物质资源高效利用的主要方式之一。利用单因素方法，探讨液化温度、复配液化剂二甘醇（DEG）与1,2-丙二醇（PG）的混合比、液固比、催化剂磷酸的用量、反应时间等因素对玉米秸秆液化得率的影响，以便优化其液化工艺；然后采用热重分析仪（TGA）、气相色谱-质谱技术（GC-MS）和核磁共振（NMR）技术对此优化条件下所得生物油的挥发降解特性和主要组成成分进行了检测探讨。分析表明，玉米秸秆液化时优化工艺参数为：液化温度170 ℃，液化剂DEG与PG混合比1∶2，液固比5∶1，H₃PO₄用量10%，反应时间45 min；此时玉米秸秆液化得率高至99.50%。TGA结果表明，此条件下所得生物油含有80%以上碳数小于25的化合物，热解后最终残炭量约为15%。GC-MS表明，可以检测出此生物油中含有的39种有机物，其中，醇类有机物的含量最多，酚类有机物的含量次之，它们相对含量依次是70.70%和25.63%，其还含有一定量的有机酸（2.80%）、醚类（0.64%）、酯类（0.10%）和酮类（0.13%）等有机物；其组分十分复杂，高含氧量，稳定性较差。1H-和13C-NMR分析表明，不同化学位移δ与生物油中不同类型的质子和碳原子相对应，明确生物油中不同类型H和C的分布，有利于对其分子结构进行深入探讨。这些研究为非木材生物质高效液化条件的选择及液化产物制备化学品和生物燃油给予理论基础与应用支持，促进了生物质资源的有效转化利用及其生物质基产品的开发。     

The Versatile Electronic,Magnetic and Photo-Electro Catalytic Activity of a New 2D MA2Z4 Family**

The recent successful growth of MoSi₂N₄ and WSi₂N₄ monolayers led to the discovery of a new class of the two-dimensional (2D) MA₂Z₄ materials with no known 3D layered allotropes, which renders great possibilities to integrate diverse properties by proper design of sandwiched “MZ₂” building blocks and “A−Z” passivation layers. In this work, the dynamic stability, electronic properties, and surface reactivity of the new MA₂Z₄ family, in which M is Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, W, A refers to Si or Ge, and Z is N, P or As, is theoretically probed. Among the proposed 54 possible combinations, about 42 compositions are dynamically stable, which vary from non-magnetic, anti-ferromagnetic, to ferromagnetic semiconductors, metals and half-metals. In particular, the VB (V, Nb, Ta) MA₂Z₄ possesses robust intrinsic ferromagnetism that is essential for spintronics applications. In regard to surface activity, most MA₂Z₄, particularly N- or P-terminated IVB and VB MA₂Z₄, have high catalytic potential for hydrogen evolution, and the ▵G_H of non-magnetic MA₂Z₄ is highly correlated to the highest occupied p electronic states of the surface Z atoms. The photocatalytic activity is also evaluated. MoSi₂N₄ and WSi₂N₄ within 4 % tensile strain are capable of photocatalytic overall water splitting. The findings indicate the new 2D MA₂Z₄ family has fascinating properties and possesses strong potential for applications but not limited to electronics, spintronics and catalysts, which will stimulate the interests of experimental synthesis.     

Dipole bands in nucleus ~(139)Pm

High-spin states in nucleus 139Pm have been studied using the reaction 116Cd(27Al,4n)139Pm.Two dipole cascades have been found.Spin and parity assignments were based on the Directional Correlation of Oriented Nuclei(DCO) ratios and systematic behavior in neighboring odd-proton nuclei.The level structures of 139Pm are compared with those of the N =78 isotone 141Eu in which two dipole bands have been confirmed as magnetic rotational bands.The close similarity between them suggests that the dipole bands in 139...     

Correlation of soft magnetic properties with free volume and medium range ordering in metallic glasses probed by fluctuation microscopy and positron annihilation technique

Amorphous ribbons of different thicknesses of Co_64.5Fe_3.5Si₁₆B₁₄Ni₂ alloy were synthesized using the melt spinning technique by varying wheel speed. The effect of cooling rate on the ribbon thickness and their soft magnetic properties have been studied. The amorphous structure has been characterized in terms of structural free volume and medium range order (MRO) by positron annihilation spectroscopy and fluctuation electron microscopy techniques. Positron lifetime spectra of amorphous samples showed two lifetime components. The first component was found to be correlated with MRO whereas, the second lifetime component was found to be associated with nanovoid type of defects, and the second component was strongly dependent on processing conditions. It could be established that the coercivity of the amorphous samples produced by the rapid solidification technique mainly depends on the defects formed during processing rather than change induced in MRO.