Strukturuntersuchungen an Disiliziden

Zusammenfassung Röntgenographische Untersuchungen der Disilizidsysteme: TiSi₂–MoSi₂, TiSi₂–WSi₂, MoSi₂–WSi₂, CrSi₂–MoSi₂, CrSi₂–WSi₂ sowie TiSi₂–MoSi₂–WSi₂ ergaben einen lückenlosen Übergang von MoSi₂–WSi₂, das Auftreten singulärer Kristallarten (Ti, Mo)Si₂ bzw. (Ti, W)Si₂, die mit dem C 40-Gitter isotyp sind und einen ausgedehnten homogenen Bereich besitzen. Diese Kristallart reicht fast bis an das reine TiSi₂ heran und kann als eine Art allotrope Form desselben aufgefaßt werden.Der Aufbau im System: TiSi₂–MoSi₂–WSi₂ wird angegeben.MoSi₂ und WSi₂ lösen beträchtliche Mengen (46 bzw. 61 Mol-%) CrSi₂; CrSi₂ vermag 31 Mol-% MoSi₂ bzw. 16 Mol-% WSi₂ homogen aufzunehmen. Die Gitterkonstanten wurden bestimmt.Herrn Dipl.-Ing.F. Benesovsky sind wir für wertvolle Ratschläge und Aussprachen zu herzlichem Dank verpflichtet.Mit 4 Abbildungen.Vorgetragen im Symposium De re metallica, Reutte, Tirol, 22, bis 26, Juni 1952.     

Construction of direct Z-scheme g-C3N4/TiO2 nanorod composites for promoting photocatalytic activity

Direct Z-scheme g-C₃N₄/TiO₂ nanorod composites were prepared for enhancing photocatalytic activity for pollutant removal. The characterization revealed that the g-C₃N₄/TiO₂ nanorod composite formed a close interface contact between g-C₃N₄ and TiO₂ nanorods, which was of benefit for the charge transfer and resulted in its high photocatalytic activity. The g-C₃N₄/TiO₂ nanorod composites exhibited higher photocatalytic activity for degradation of Rhodamine B (RHB) than bare g-C₃N₄ and TiO₂ nanorods. The high photocatalytic activity of g-C₃N₄/TiO₂ nanorod composites is attributed to the formation of the direct Z-scheme system, in which the electrons from the conduction band (CB) of TiO₂ combine with the holes from the valence band (VB) of C₃N₄ while the electrons from the CB of C₃N₄ and holes from the VB of TiO₂ with stronger redox ability are used to reduce and oxidize pollutants. Based on the radical-trapping experiments, the main reactive species for RHB degradation are O₂⁻ and · OH, which are produced by photoinduced electrons and holes with high redox ability. This work provides insights into the photocatalytic mechanism of composite materials for the photocatalytic removal of organic pollutants.     

In Situ Synthesis of Cu3P/P-Doped g-C3N4 Tight 2D/2D Heterojunction Boosting Photocatalytic H2 Evolution†

Heterojunction design in a two-dimensional (2D) fashion has been deemed beneficial for improving the photocatalytic activity of g-C₃N₄ because of the promoted interfacial charge transfer, yet still facing challenges. Herein, we construct a novel 2D/2D Cu₃P nanosheet/P-doped g-C₃N₄ (PCN) nanosheet heterojunction photocatalyst (PCN/Cu₃P) through a simple in-situ phosphorization treatment of 2D/2D CuS/g-C₃N₄ composite for photocatalytic H₂ evolution. We demonstrate that the 2D lamellar structure of both CuS and g-C₃N₄ could be well reserved in the phosphorization process, while CuS and g-C₃N₄ in-situ transformed into Cu₃P and PCN, respectively, leading to the formation of PCN/Cu₃P tight 2D/2D heterojunction. Owing to the large contact area provided by intimate face-to-face 2D/2D structure, the PCN/Cu₃P photocatalyst exhibits significantly enhanced charge separation efficiency, thus achieving a boosted visible-light-driven photocatalytic behavior. The highest rate for H₂ evolution reaches 5.12 μmol·h^–1, nearly 24 times and 368 times higher than that of pristine PCN and g-C₃N₄, respectively. This work represents an excellent example in elaborately constructing g-C₃N₄-based 2D/2D heterostructure and could be extended to other photocatalyst/co-catalyst system.      

Hydrothermal Synthesis of g‐C3N4/NiFe2O4 Nanocomposite and Its Enhanced Photocatalytic Activity

Herein, for the first time, a direct Z‐scheme g‐C₃N₄/NiFe₂O₄ nanocomposite photocatalyst was prepared using facile one‐pot hydrothermal method and characterized using XRD, FT‐IR, DRS, PL, SEM, EDS, TEM, HRTEM, XPS, BET and VSM characterized techniques. The result reveals that the NiFe₂O₄ nanoparticles are loaded on the g‐C₃N₄ sheets successfully. The photocatalytic activities of the as‐prepared photocatalysts were evaluated for the degradation of methyl orange (MO) under visible light irradiation. It was shown that the photocatalytic activity of the g‐C₃N₄/NiFe₂O₄ nanocomposite is about 4.4 and 3 times higher than those of the pristine NiFe₂O₄ and g‐C₃N₄ respectively. The enhanced photocatalytic activity could be ascribed to the formation of g‐C₃N₄/NiFe₂O₄ direct Z‐scheme photocatalyst, which results in efficient space separation of photogenerated charge carriers. More importantly, the as‐prepared Z‐scheme photocatalyst can be recoverable easily from the solution by an external magnetic field and it shows almost the same activity for three consecutive cycles. Considering the simplicity of preparation method, this work will provide new insights into the design of high‐performance magnetic Z‐scheme photocatalysts for organic contaminate removal.     

Die Kristallstruktur des Komplexnitrides Mo(Ta,Mo)2N2

In the ternary system Ta/Mo/N a complex nitride of formula Mo(Ta,Mo)₂N₂ was observed at a nitrogen pressure of 360 bar and a temperature of 1,600°C. The crystal structure was determined from X-ray powder diagrams. The tetragonal unit cell, space groupI4/mmm-D _4h ¹⁷ , lattice parametersa=0.3051 nm,c=1.2530 nm contains ten atoms with an arrangement of the metal atoms corresponding to the MoSi₂-Type structure.

     

Geometric and Electronic Structure of WSiN(N = 1–6, 12) Clusters

Geometry optimizations of WSi _N (n = 1–6, 12) clusters are performed using the B3LYP/ LanL2DZ method for a sequence of different spin states, changing from spin singlet to spin septet conditions. The resulting equilibrium structures are discussed under the aspects of geometric features, cluster internal charge transfer and magnetic properties. It is shown that the W impurity in the Si _N environment generally acts as an electron acceptor. However, the charge on the W atom, as obtained by natural population analysis, can be sensitively tuned through the variation of the spin constraint from S = 0 to S = 3. The resulting geometries of WSi _n (N = 3–6) are compared with the known ground state structures of Si _N+1 (N = 3–6), and substitutional geometries are identified for N = 3 and N = 5. The nonzero spin states of WSi _N are shown to display different patterns of magnetic order, corresponding to uniform and to alternating atomic spin orientations within the cluster. Highly compact O _h and D _6h structures are identified as stable geometries of WSi₆ and of the experimentally detected unit WSi₁₂, respectively. Comparison is made with the cluster series MoSi_N(N = 1–6) and CuSi _N (N = 1–6,12).     

Synthesis and Structure of Ba[ZrN2] and Ba2[NbN3]

Ba₃N₂ reacts at 950°C under pure N₂ with Zr to yield dark red, air-sensitive Ba[ZrN₂]. This new compound crystallizes in the tetragonal space group P4/nmm with a = 416.10(2), c = 839.2(1) pm and Z = 2. The crystal structure was solved and refined using X-ray and neutron powder diffraction data. In the nitrido zirconate [ZrN₂]^2? the Zr atoms exhibit a square-pyramidal coordination by five N atoms at distances of 201(3) and 220.2(2) pm. The pyramids share all the edges in the basal plane to form layers parallel to (001) with their apices alternately pointing up and down. The Ba²⁺ cations are integrated into these layers at the levels of the pyramidal apices. The structure can be interpreted as a stuffed PbFCl type. Ba₂[NbN₃] is formed by the reaction of Ba₃N₂ and NbN or of Ba and Nb at 1 000°C under N₂. Isostructural to Ba₂[TaN₃] it crystallizes in the monoclinic space group C2/c with a = 613.2(3), b = 1 176.8(3), c = 1 322.9(4) pm, β = 91.65(2)°, Z = 8. The nitrido niobate anions form chains of corner sharing NbN₄ tetrahedra with distances Nb? N between 188(1) and 199.9(9) pm.     

Niob- und Tantalkomplexe mit P2- und P4-Liganden

Niobium and Tantalum Complexes with P₂ and P₄ Ligands The photolysis of [Cp″Ta(CO)₄] 1 (Cp″ = C₅H₃^tBu₂?1,3) and P₄ affords Cp″(CO)₂Ta(η⁴?P₄) 2 , [{Cp″(CO)Ta}₂(m??η^2:2?P₂)₂] 3 and [Cp₃″(CO)₃Ta₃(P₂)₂] 4 . In a photochemical reaction 2 and [Cp*Nb(CO)₄] 5 form [{Cp*(CO)Nb}{Cp″(CO)Ta}(m??η^2:2?P₂)₂] 6 and [{Cp*(CO)₂Nb} {Cp*Nb}{Cp″(CO)Ta}(m?₃?η^2:1:1?P₂)₂] 7 , a compound with the novel m?₃?η^2:2:1?P₂-coordination mode. The reaction of 2 and [Cp*Co(C₂H₄)₂] 8 leads to [{Cp*Co} {Cp″(CO)Ta}(m??η^2:2?P₂)₂] 9 , a heteronuclear complex with an ?early”? and a ?late”? transition metal. Complexes 2, 3, 7 and 9 have been further characterized by X-ray structure analyses.     

Pulsed current activated synthesis and consolidation of nanostructured MoSi2–TaSi2 composite

Nanopowders of Mo, Ta, and Si were fabricated by high-energy ball milling. A dense nanostructured MoSi₂–TaSi₂ composite was simultaneously synthesized and sintered by the pulsed current activated heating method within 5 min from mechanically activated powder of Mo, Ta, and Si. A highly-dense MoSi₂–TaSi₂ composite was produced under simultaneous application of an 80-MPa pressure and the pulsed current. The sintering behavior, mechanical properties, and microstructure of the composite were investigated.     

1,2,2,2-Tetrafluor-1-(trifluormethyl)ethylat als Nukleophil und oxydierendes Fluorierungsmittel für 2-Halogen-4,4,5,5-tetrakis(trifluormethyl)-1,3,2-dioxaphospholan

Syntheses and Crystal Structures of the Phases 6R? Cu_xM_1+yS₂ (M = Nb, Ta) Thermal decomposition of 2H? Cu_0.66MS₂ (M = Nb, Ta) results in the formation of 6R? Cu_xM_1+yS₂. Crystals can be obtained by chemical vapour transport reactions with iodine in a temperature gradient (1320–1220 K). The structures of four phases with trigonal symmetry (R3 m, Z = 6) were determined from single crystal x-ray diffraction data. Nb and Ta, resp., of the MS₂ partial structures have a trigonal prismatic coordination. The additional metal atoms are distributed at random only in S-octahedra (Nb, Ta) and -tetrahedra Cu sharing faces with MS₆-prisms. The sequence of the layers can be rationalized on the assumption of stabilizing interactions between metal atoms in adjacent layers.     

Z‐Scheme 2D/2D Heterojunction of Black Phosphorus/Monolayer Bi2WO6 Nanosheets with Enhanced Photocatalytic Activities

Black phosphorus (BP), a star‐shaped two‐dimensional material, has attracted considerable attention owing to its unique chemical and physical properties. BP shows great potential in photocatalysis area because of its excellent optical properties; however, its applications in this field have been limited to date. Now, a Z‐scheme heterojunction of 2D/2D BP/monolayer Bi₂WO₆ (MBWO) is fabricated by a simple and effective method. The BP/MBWO heterojunction exhibits enhanced photocatalytic performance in photocatalytic water splitting to produce H₂ and NO removal to purify air; the highest H₂ evolution rate of BP/MBWO is 21042 μmol g^?1, is 9.15 times that of pristine MBWO and the NO removal ratio was as high as 67 %. A Z‐scheme photocatalytic mechanism is proposed based on monitoring of ^.O₂^?, ^.OH, NO₂, and NO₃^? species in the reaction. This work broadens applications of BP and highlights its promise in the treatment of environmental pollution and renewable energy issues.     

Crystal structure of tetramethylammonium hexafluoridoniobate(V) and hexafluoridotantalate(V)

Crystal structures of newly synthesized tetramethylammonium hexafluoridoniobate(V) and hexafluoridotantalate(V) (CH₃)₄N[МF₆] (M=Nb, Ta) have been determined; they crystallize in the tetragonal crystal system, sp. gr. P4/nmm. Crystal structures of isostructural compounds (CH₃)₄N[МF₆] (M=Nb, Ta) are formed by virtually regular tetrahedral tetramethylammonium cations (CH₃)₄N⁺ (NMe₄, TMA) and octahedral complex anions [МF₆]^– (M=Nb, Ta), fluorine atoms of the equatorial plane are statistically disordered over two positions. Ionic interactions and weak hydrogen bonds C–H???F join the cations and the complex anions in a 3D assembly.     

凹凸棒石/g-C3N4-AgFeO2复合材料制备及其光催化性能

以凹凸棒石(简称凹土,ATP)为基体,通过原位化学法一步直接合成g-C_3N_4薄层材料,并将其有效固载于凹土表面(ATP/gC_3N_4),再通过原位沉淀法引入不同比例AgFeO_2纳米颗粒,构筑系列兼具磁分离特性和高效光催化活性的ATP/g-C_3N_4-AgFeO_2-Y复合光催化剂(Y=wATP/g-C_3N_4/(wATP/g-C_3N_4+wAg FeO_2)×100%,表示ATP/g-C_3N_4在ATP/g-C_3N_4-AgFeO_2复合材料中所占的质量百分数)。采用XRD、SEM、BET、UV-Vis、PL和ICP表征其结构和物化性能,以酸性红G(ARG)为目标降解物,研究其光催化性能。研究发现:通过形成Si-O-C键,g-C_3N_4薄层被均匀固定在凹土表面;AgFeO_2纳米颗粒均匀沉积于ATP/g-C_3N_4表面并形成Z型异质结,ATP/gC_3N_4-AgFeO_2-Y具有比ATP/g-C_3N_4和AgFeO_2更优异的可见光光催化性能,且随着ATP/g-C_3N_4含量的增大呈先升高而后下降的趋势;当Y=57%时复合材料的性能最佳,ATP/g-C_3N_4-AgFeO_2-57%对20 mg·L-1酸性红G的降解率可达97.4%,循环4次使用后,降解率仍保持94.2%。通过自由基捕获实验研究了光催化反应机理,发现·O2-是光催化过程的主要活性物种。     

Steric Mixed-Cation 2D Perovskite as a Methylammonium Locker to Stabilize MAPbI3

The reduced dimension perovskite including 2D perovskites are one of the most promising strategies to stabilize lead halide perovskite. A mixed-cation 2D perovskite based on a steric phenyltrimethylammonium (PTA) cation is presented. The PTA-MA mixed-cation 2D perovskite of PTAMAPbI₄ can be formed on the surface of MAPbI₃ (PTAI-MAPbI₃) by controllable PTAI intercalation by either spin coating or soaking. The PTAMAPbI₄ capping layer can not only passivate PTAI-MAPbI₃ perovskite but also act as MA⁺ locker to inhibit MAI extraction and significantly enhance the stability. The highly stable PTAI-MAPbI₃ based perovskite solar cells exhibit a reproducible photovoltaic performance with a champion PCE of 21.16 %. Such unencapsulated devices retain 93 % of initial efficiency after 500 h continuous illumination. This steric mixed-cation 2D perovskite as MA⁺ locker to stabilize the MAPbI₃ is a promising strategy to design stable and high-performance hybrid lead halide perovskites.     

Rational Design of Carbon-Based 2D Nanostructures for Enhanced Photocatalytic CO2 Reduction: A Dimensionality Perspective

Photocatalytic CO₂ reduction is a revolutionary approach to solve imminent energy and environmental issues by replicating the ingenuity of nature. The past decade has witnessed an impetus in the rise of two-dimensional (2D) structure materials as advanced nanomaterials to boost photocatalytic activities. In particular, the use of 2D carbon-based materials is deemed as highly favorable, not only as a green material choice, but also due to their exceptional physicochemical and electrical properties. This Review article presents a diverse range of alterations and compositions derived from 2D carbon-based nanomaterials, mainly graphene and graphitic carbon nitride (g-C₃N₄), which have remarkably ameliorated the photocatalytic CO₂ performance. Herein, the rational design of the photocatalyst systems with consideration of the aspect of dimensionality and the resultant heterostructures at the interface are systematically analyzed to elucidate an insightful perspective on this pacey subject. Finally, a conclusion and outlook on the limitations and prospects of the cutting-edge research field are highlighted.     

Cu-Doped MoSi2N4 Monolayer as a Potential NH3 Sensor

Cu doped MoSi₂N₄ monolayer (Cu-MoSi₂N₄) was firstly proposed to analyze adsorption performances of common gas molecules including O₂, N₂, CO, NO, NO₂, CO₂, SO₂, H₂O, NH₃ and CH₄ via density functional theory (DFT) combining with non-equilibrium Green's function (NEGF). The electronic transport calculations indicate that Cu-MoSi₂N₄ monolayer has high sensitivity for CO, NO, NO₂ and NH₃ molecules. However, only NH₃ molecule adsorbs on the Cu-MoSi₂N₄ monolayer with moderate strength (−0.55 eV) and desorbs at room temperature (2.36×10⁻³ s). Thus, Cu-MoSi₂N₄ monolayer is demonstrated as a potential NH₃ sensor.     

Degradation of tetracycline hydrochloride by ultrafine TiO2 nanoparticles modified g-C3N4 heterojunction photocatalyst: Influencing factors,products and mechanism insight

The unique heterojunction photocatalyst of graphite carbon nitride（g-C₃N₄） modified ultrafine TiO₂（gC₃N₄/Ti O₂） was successfully fabricated by electrochemical etching and co-annealing method. However,the effects of various environmental factors on the degradation of TC by g-C₃N₄/Ti O2and the internal reaction mechanism are still unclear. In this study, the effects of initial p H, anions, and cations on the ph...     

Steric Mixed‐Cation 2D Perovskite as a Methylammonium Locker to Stabilize MAPbI3

The reduced dimension perovskite including 2D perovskites are one of the most promising strategies to stabilize lead halide perovskite. A mixed‐cation 2D perovskite based on a steric phenyltrimethylammonium (PTA) cation is presented. The PTA‐MA mixed‐cation 2D perovskite of PTAMAPbI₄ can be formed on the surface of MAPbI₃ (PTAI‐MAPbI₃) by controllable PTAI intercalation by either spin coating or soaking. The PTAMAPbI₄ capping layer can not only passivate PTAI‐MAPbI₃ perovskite but also act as MA⁺ locker to inhibit MAI extraction and significantly enhance the stability. The highly stable PTAI‐MAPbI₃ based perovskite solar cells exhibit a reproducible photovoltaic performance with a champion PCE of 21.16 %. Such unencapsulated devices retain 93 % of initial efficiency after 500 h continuous illumination. This steric mixed‐cation 2D perovskite as MA⁺ locker to stabilize the MAPbI₃ is a promising strategy to design stable and high‐performance hybrid lead halide perovskites.     

Darstellung und Kristallstruktur von Niob-Tantal-Nitridphasen (Nb,Ta)N∼1

Preparation and Crystal Structures of Niobium-Tantalum-Nitride Phases (Nb, Ta)N_～1 Ta? Nb alloys with graduated composition are nitrided with NH₃ at 1100–1450°C. The mononitrides formed are investigated by X-ray diffraction. Their nitrogen content is evaluated by chemical analysis. Seven Ta? Nb nitride phases are observed. Depending on the temperature, the phases appear in a strictly defined sequence along the variation of the Ta:Nb relation. Corresponding to this sequence, the density (formula volume) of this nitride phases varies.     

Separation and simultaneous determination of niobium and tantalum in steel by reversed-phase high-performance liquid chromatography using 2-(2-pyridylazo)-5-diethylamino phenol as a pre-column derivatizing reagent

A method for the simultaneous determination of Nb and Ta in steel and alloy by reversed-phase high-performance liquid chromatography (RP-HPLC) was proposed. 2-(5-Bromo-2-pyridylazo)-5-diethylamino phenol (5-Br-PADAP) was used as a pre-column chelating agent to form a ternary complex with Nb(V) and Ta(V) and tartaric acid. The ternary complexes of Nb(V) and Ta(V) were eluted within 8 min on a C₁₈ column with a mobile phase of methanol-water (55:45, v/v) containing 10 mmol l⁻¹ acetate buffer (pH3.5) and determined with spectrophotometric detection at 598 nm. The detection limits for Nb(V) and Ta(V) were 0.60 and 0.72 μg l⁻¹, respectively, when the ratio of signal-to-noise is 3. The proposed method was used to analyze Nb and Ta in cast iron, alloy and stainless steel.