Ni-B和Ni-Ce-B超细非晶态合金的退火晶化及其催化性能

 采用XAFS,XRD和DTA方法研究了Ni－B和Ni－Ce－B超细非晶态合金在退火过程中的结构变化及其结构与催化性能的关系．活性结果表明,在退火温度为623K时,Ni－B和Ni－Ce－B样品的苯加氢催化反应转化率最高,分别为63％和81％,0．3％Ce的掺入提高了Ni－Ce－B的催化活性．DTA结果表明,Ni－B超细非晶态合金在598和653K有两个晶化峰,而Ni－Ce－B样品有548,603,696和801K四个晶化峰．XAFS和XRD结果进一步说明,在573K退火时,Ni－B样品晶化生成晶态Ni3B和纳米晶Ni,此时Ni－Ce－B仅有少量晶态Ni3B生成．在673K退火时,Ni－B样品中的Ni3B开始分解生成晶态Ni,同时纳米晶Ni聚集并形成大颗粒晶态Ni,而Ni－Ce－B样品晶化生成晶态Ni3B和纳米晶Ni．在773K和更高的温度退火处理后,Ni－B样品中Ni的局域环境结构与金属Ni箔基本一致,但Ni－Ce－B样品晶化生成的Ni晶格有较大畸变,同时Ni3B并未分解．说明0．3％的Ce对提高Ni－Ce－B样品的稳定性有显著作用．本文首次报道了Ni－B和Ni－Ce－B超细非晶态合金中苯加氢催化活性中心为纳米晶Ni和类似于金属Ni的Ni－B非晶态合金．     

ICP-MS determination of heavy metals in submerged cultures of wood-rotting fungi

Accumulation of five heavy metal ions by five species of wood-rotting basidiomycetes during a 9-day cultivation was studied. Contents of Cd, Cu, Pb, and Zn were measured using ICP-MS; the amount of mercury was determined directly in solid samples using the Advanced Mercury Analyser. A standard operation procedure for the sample preparation and determination of metal content was developed and validated. Presence of Cd, Cu, Hg, and Pb decreased the accumulation of zinc by the fungi. The basidiomycete Pycnoporus cinnabarinus exhibited the highest metal binding capacity of all fungi tested.     

Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres

Incineration methods are becoming increasingly important from the view point of the need to minimize the environmental impact of waste tyre disposal. Combustion of waste tyre, one high ash coal and tyre-coal blends with 10, 30 and 50% waste tyre were investigated by means of thermogravimetric analysis (TGA) carried out at 20 K min⁻¹ in the temperature range from ambient temperature to 1273 K. And effects of the mixed proportion between coal and waste tyre on the combustion process, ignition and burnout characteristics were also studied. The results indicate that the combustion of waste tyre is controlled by the emission of volatile matter, the regions are more complex for waste tyre (three or more peaks) than for coal (one peak). Also as compared with the case of burning only high ash coal, the incorporation of waste tyre can improve the combustion characteristics of high ash coal, especially the ignition performance and the peak weight loss compared with the separate burning of waste tyre and coal. Moreover, comparisons of the TG-DTG profiles between experimental and calculational results, it is indicate that there is a comparatively important difference, the co-combustion characteristics is the coupling effect between waste tyre and coal. The data resulting also showed that the co-combustion of waste tyre and low quanlitied coal as fuel is feasible.     

Synthesis and characterization of oligo-4-[(pyridin-3-ylimino)methyl]phenol

The oxidative polycondensation of 4-[(pyridin-3-ylimino)methyl]phenol (4-PIMP) with O₂, H₂O₂, and NaOCl was studied in an aqueous alkaline medium between 50°C and 90°C. Oligo-4-[(pyridin-3-ylimino)methyl]phenol (O-4-PIMP) prepared was characterized by ¹H-NMR, ¹³C-NMR, FT-IR, UV-VIS, size-exclusion chromatography, and elemental and thermal analyses techniques. At the optimum reaction conditions, the yield of O-4-PIMP was 18.9%, 39.4%, and 46.8% using H₂O₂, O₂, and NaOCl oxidant, respectively. According to the TG analysis, the initial degradation temperature of O-4-PIMP was 218°C, which was by 50°C higher than that of 4-PIMP. Thermal analyses of 4-PIMP and O-4-PIMP were carried out in N₂ atmosphere at 15–1000°C. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and electrochemical energy gaps of 4-PIMP and O-4-PIMP were determined from the onset potentials for n-doping and p-doping, respectively. Also, optical band gaps of 4-PIMP and O-4-PIMP were determined according to UV-VIS measurements.     

采用多光程长建模方法检测血液成分含量

为了提高近红外光谱血液成分含量分析模型的预测精度,利用多个光程长(optical path length,OPL)共同参与建模的方法进行血糖等6种血液成分的定量分析。通过微米位移机构实现不同光程长血液光谱的测量,由全自动生化分析仪给出生化成分分析结果,并出具化验单。采用偏最小二乘法(PLS2)进行血液的近红外光谱建模及预测。由于血液光谱存在显著的非线性特征,不同光程长的血液样本的等效吸收系数不同,同一波长不同光程长(0.20~1.25 mm)测得的血液光谱互不相关。主动把非线性特性作为一种测量手段引入,不再利用单个的最佳光程长建模,而是用各个血液组分对应的多个最佳光程长的近红外光谱同时参与建立校正模型,进行血液成分的分析预测。研究结果表明,多光程长建模方法用于血液成分含量分析,可提高血液成分校正模型的预测精度。     

Determination of chloride ion in aqueous samples by isotope-dilution Fourier-transform flame infrared emission (ID-FIRE) spectrometry

An isotope dilution method for the determination of chloride ion in aqueous samples is described. The method makes use of the isotopic shift in the rotational lines of the 1–0 band of HCl emitted in the near infrared region of the spectrum by vibrationally excited HCl molecules present in a hydrogen/entrained air flame. Chloride ion in the sample is converted to chlorine gas by electrolysis and swept into a hydrogen/entrained air flame where it is converted into HCl. Because isotope dilution is an absolute method of analysis, matrix effects are minimized, and the chlorine generation step need not be quantitative. With the system described in this paper, samples must contain at least 9 mg of chloride ion per ml, and a 2-ml sample is required. Over the range from 10 to 30 mg Cl⁻ ml⁻¹, the average error was −0.96%, and the average relative standard deviation was 3.3% for seven samples using seven of the more intense lines in the P branch. Compared with standard silver nitrate titrations, the isotope dilution procedure was not affected by such common interferences as bromide ion and iodide ion. The technique was applied to several seawater samples from different regions.     

Diastereoselective synthesis of 2,3,4,5-tetrasubstituted isoxazolidines via 1,3-dipolar cycloaddition

The 1,3-dipolar cycloaddition reactions of α-2-methoxyaryl nitrones with nitrostyrenes and chalcones have been investigated. The regiochemistry and stereochemistry of the resultant cycloadducts have been determined with the help of NMR spectroscopy and X-ray analysis. β-Nitrostyrenes add to nitrones to give two geometrical isomers, while the β-methyl-β-nitrostyrene gives a single isomer in relatively low yield. The chalcones give a single cycloadduct upon 1,3-dipolar addition.     

Coupling Cloud Point Extraction to Instrumental Detection Systems for Metal Analysis

The purpose of this article is to review and evaluate cloud point extraction of metals and its coupling to different contemporary instrumental methods of analysis. This review covers a selection of the literature published on this topic over the period mainly between 1997 and September 2005 (consisting of 50 publications). The current state of the art for CPE concerning metals and metal chelates is presented with special emphasis on the hyphenation of this interesting extraction/preconcentration approach mediated by surfactants to spectrophotometry, atomic spectroscopy and separation techniques. We present contemporary CPE developments concerning metal speciation and determination and their application to different environmental, clinical, geological and food samples. Strategies for method development as well as future perspectives are also covered.     

苯巴比妥的二次微分简易示波伏安法测定

利用苯巴比妥的示波特性 ,分别建立了在0.2mol/LKOH和1.0×10-4mol/LCd2 +-0.1mol/L硼砂底液中直接和间接测定苯巴比妥的二次微分简易示波伏安法 ;直接测定和间接测定的线性范围分别为1.0×10 -5mol/L～1.0×10 -4mol/L和4.0×10 -6mol/L～8.0×10 -5mol/L ;检出限分别为8×10 -6mol/L和2×10 -6mol/L;在直接测定中 ,对6.000×10 -5mol/L苯巴比妥进行10次测定的RSD为4.5 % ;间接测定中 ,对2.000×10 -5mol/L苯巴比妥进行10次测定的RSD为2.6 % ;这一研究表明对于一些在示波分析中灵敏度不高或本身没有示波活性的药物 ,可以利用其与金属离子生成沉淀的方法间接测定 ,从而提高药物测定的灵敏度、拓宽示波分析应用领域     

地球化学分析

本文回顾、评述了我国在岩石、矿物、矿石与矿产资源、土地、环境地质与放射性测量、海洋、地下水资源、煤炭等与地球化学分析相关的研究领域中，在过去两年所取得的研究进展。