Synthesis,characterization, and optimum reaction conditions of oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol

The reaction conditions of the oxidative polycondensation of 2‐[(pyridine‐2‐yl‐methylene) amino] phenol (2‐PMAP) with air O₂, H₂O₂, and NaOCl were studied in an aqueous alkaline medium between 60 and 90 °C. Oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol (O‐2‐PMAP) was characterized with ¹H NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography (SEC), and elemental analysis techniques. Moreover, solubility testing of the oligomer was performed in polar and nonpolar organic solvents. With the NaOCl, H₂O₂, and air O₂ oxidants, the conversions of 2‐PMAP into O‐2‐PMAP were 98, 87, and 62%, respectively, in an aqueous alkaline medium. According to SEC, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of O‐2‐PMAP were 2262 g mol^?1, 2809 g mol^?1, and 1.24 with NaOCl, 3045 g mol^?1, 3861 g mol^?1, and 1.27 with air O₂, and 1427 g mol^?1, 1648 g mol^?1, and 1.16 with air H₂O₂, respectively. Also, thermogravimetric analysis showed that O‐2‐PMAP was stable against thermooxidative decomposition. The weight loss of O‐2‐PMAP was 96.68% at 900 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2717–2724, 2004     

Synthesis, characterization and thermal degradation of oligo-2-[(4-fluorophenyl) imino methylene] phenol and some of its oligomer-metal complexes

In this study, the oxidative polycondensation reaction conditions of 2-[(4-fluorophenyl) imino methylene] phenol (FPIMP) with air oxygen and NaOCl were studied in an aqueous alkaline medium between 60 and 90 °C. Synthesized oligo-2-[(4-fluorophenyl) imino methylene] phenol was characterized by ¹H-NMR, FT-IR, UV-Vis, size exclusion chromatography (SEC) and elemental analysis techniques. The yield of oligo-2-[(4-fluorophenyl) imino methylene] phenol (OFPIMP) was found to be 62.00% (for air O₂ oxidant) and 97.70% (for NaOCl oxidant) at the optimum reaction conditions. According to the SEC analysis, the number-average molecular weight (M_n), weight-average molecular weight (M_w) and polydispersity index (PDI) values of OFPIMP were found to be 1370 g mol⁻¹, 1979 g mol⁻¹ and 1.45, using NaOCl, 2105 g mol⁻¹, 2557 g mol⁻¹, and 1.22, using air O₂, respectively. During the oxidative polycondensation reaction, (2.88%) a part of -CHN group oxidized to carboxylic acid (-COOH). TG and TG-DTA analyses were shown to be more stable of oligo-2-[(4-fluorophenyl) imino methylene] phenol and its oligomer metal complexes than monomer against thermo-oxidative decomposition. The weight loss of OFPIMP was found to be 97.00% at 900 °C. The weight losses of OFPIMP-Co, OFPIMP-Ni OFPIMP-Cu oligomer-metal complex compounds were found to be 88.66%, 94.36% and 83.21%, respectively, at 1000 °C.     

Synthesis,characterization, thermal stability,conductivity, and band gaps of substitute oligo/polyamines or polyphenol

In this study, the oxidative polycondensation reaction conditions of 3,5‐dichloroaniline (DCA), 3,4,5‐trimethoxyaniline (TMA), 3,5‐bis(trifluoromethyl)aniline (BTFMA), and 4‐{[(3,5‐dichlorophenyl)imino]methyl}phenol (DCPIMP) were studied by using NaOCl oxidant in an aqueous alkaline medium between 40 and 90°C. The structures of the synthesized monomer and polymer were confirmed by FT‐IR, Ultraviolet–visible (UV–vis), ¹H‐NMR, and ¹³C‐NMR and elemental analysis. The characterization was made by TGA–DTA, size exclusion chromatography (SEC), and solubility tests. At the optimum reaction conditions, the yields of oligo‐3,5‐dichloroaniline (ODCA), poly‐3,4,5‐trimethoxy aniline (PTMA), oligo‐3,5‐bis(trifluoromethyl)aniline (OBTFMA), and poly‐4‐{[(3,5‐dichlorophenyl) imino]methyl} phenol (PDCPIMP) were found to be 98, 48, 80, and 83% in using NaOCl oxidant. According to the SEC analysis, the number‐average molecular weight (M_n), weight‐average molecular weight (M_w) and polydispersity index (PDI) values of ODCA, PTMA, and OBTFMA were found to be 2200, 3800 g mol^?1, and 1.727; 4700, 7500 g mol^?1, and 1.596; and 1690, 1950 g mol^?1, and 1.154, respectively. According to TG analysis, the weight losses of ODCA, PTMA, OBTFMA, and PDCPIMP were found to be 78.55, 54.18, 99.38, and 59.70% at 1000°C, respectively. PTMA showed higher stability against thermal decomposition. Electrical conductivity of the polymers was measured, showing that the polymer is a typical semiconductor. The highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO) and electrochemical band gaps ( ) of ODCA, PTMA, OBTFMA, and PDCPIMP were calculated from their absorption edges of cyclic voltammograms. The optical band gaps (E_g) values of all compounds were calculated from UV–vis measurements. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterization, optimum reaction conditions,and some polymer–metal complexes of poly(phenoxy-imine)s containing furan ring

In this study, Schiff bases containing azomethine (–HC=N–) compounds were synthesized from the condensation reaction of 4-aminophenol and 2-aminophenol and 5-methyl-2-furaldehyde. Orange-colored Schiff bases, 4-[(5-methyl- 2-furyl) methyleneamino] phenol (4MFMAP) and 2-[(5-methyl-2-furyl) methyleneamino] phenol (2MFMAP) turned to poly-4-[(5-methyl-2-furyl) methyleneamino] phenol (P-4MFMAP) and poly-2-[(5-methyl-2-furyl) methyleneamino] phenol (P-2MFMAP) polyazomethine derivatives by NaOCl oxidant in alkaline aqueous medium. In addition, poly-2-[(5-methyl-2-furyl) methyleneamino] phenol cobalt (II) and copper (II) complexes were synthesized. FTIR and NMR measurements for structural analysis of the synthesized compounds, UV–Vis analysis for optical properties, electrical conductivity measurements, and thermal analysis with the TG–DTA techniques were determined. The yield of P-4MFMAP and P-2MFMAP was found to be 84.6% and 78.6 as follows [4MFMAP] = 0.066, [KOH] = 0.198 [NaOCl] = 0.066 mol L^?1 at 60 °C for 3 h and [2MFMAP] = 0.066, [KOH] = 0.132 [NaOCl] = 0.066 mol L^?1 at 70 °C for 3 h, respectively.     

Synthesis,Characterization and Thermal Degradation of Oligo‐2‐[(4‐hydroxyphenyl) Imino Methyl]‐1‐naphtol and Oligomer‐Metal Complexes

The oxidative polycondensation of 2‐[(4‐hydroxyphenyl) imino methyl]‐1‐naphtol (4‐HPIMN) has been accomplished by using NaOCl, H₂O₂ and air O₂ oxidants in aqueous alkaline medium. Optimum reaction conditions of the oxidative polycondensation and the main parameters of the process were established. At optimum reaction conditions, yield of the products were found to be 77.0%, 91.6% and 99.0% for H₂O₂, air O₂ and NaOCl oxidants, respectively. The structures of the obtained monomer and oligomer were confirmed by FT‐IR, UV‐Vis, ¹H‐ and ¹³C‐NMR and elemental analysis. The characterization was made by TG‐DTA, SEC and solubility tests. The ¹H‐ and ¹³C‐NMR data shows that the polymerization proceeded by the C–C coupling of ortho positions according to –OH group of 4‐HPIMN. The molecular weight distribution values of the product were determined by using size exclusion chromatography (SEC). The number‐average molecular weight (M_n), weight‐average molecular weight (M_w) and polydispersity index (PDI) values of O‐4‐HPIMN were found to be 1777, 2225 and 1.252; 1790, 2250 and 1.257; 4540, 5139 g mol^?1, and 1.132 for NaOCl, H₂O₂ and air O₂ oxidants, respectively. According to TG analyses, the carbonaceous residue of 4‐HPIMN and O‐4‐HPIMN was found to be 28.02% and 44.22% at 1000°C, respectively. Thermal analyses of O‐4‐HPIMN‐Cd, O‐4‐HPIMN‐Co, O‐4‐HPIMN‐Cu, O‐4‐HPIMN‐Fe, O‐4‐HPIMN‐Mg, O‐4‐HPIMN‐Mn, O‐4‐HPIMN‐Ni, O‐4‐HPIMN‐Pb and O‐4‐HPIMN‐Zn oligomer‐metal complex compounds were investigated in N₂ atmosphere between 15–1000°C.     

Synthesis, characterization, thermal stability and electrochemical properties of poly-4-[(2-methylphenyl)iminomethyl]phenol

In this study, the reaction conditions of poly-4-[(2-methylphenyl)iminomethyl]phenol (P-2-MPIMP) were studied by using oxidants such as air O₂, H₂O₂ and NaOCl in an aqueous alkaline medium between 50 and 90 °C. The structures of the synthesized monomer and polymer were confirmed by FT-IR, UV-vis, NMR and elemental analysis. The characterization was made by TG-DTA, size exclusion chromatography (SEC) and solubility tests. At the optimum reaction conditions, the yield of poly-4-[(2-methylphenyl)iminomethyl]phenol (P-2-MPIMP) was found to be 20% (for air O₂ oxidant), 33% (for H₂O₂ oxidant), and 74% (for NaOCl oxidant). According to the SEC analysis, the number-average molecular weight (M_n), weight-average molecular weight (M_w) and polydispersity index (PDI) values of P-2-MPIMP were found to be 3300, 4100 g mol⁻¹ and 1.242, using H₂O₂, and 4550, 5150 g mol⁻¹and 1.132, using air O₂ and 5300, 5850 g mol⁻¹ and 1.104, using NaOCl, respectively. According to TG analysis, the weight losses of 4-[(2-methylphenyl)iminomethyl]phenol (2-MPIMP) and P-2-MPIMP were found to be between 75.29% and 48.17% at 1000 °C, respectively. P-2-MPIMP was shown to have a higher stability against thermal decomposition. Also, electrical conductivity of the P-2-MPIMP was measured, showing that the polymer is a typical semiconductor. Electrochemically, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO) and electrochemical energy gaps ( of 2-MPIMP and P-2-MPIMP were found to be −6.01, −6.03; −2.63, −2.82; 3.38 and 3.21 eV, respectively. According to UV-vis measurements, the optical band gap (E_g) of 2-MPIMP and P-2-MPIMP was found to be 3.40 and 2.97 eV, respectively.     

Polyol-Komplexe. VIII. R,R-trans-1,2-Diaminocyclohexan-κN,N′-(methyl-β-D-xylopyranosid-2,3-ato-κO2,O3)-aqua-kupfer-Dihydrat, [(R,R-chxn)(H2O)Cu(Me-β-D-Xylp2,3 H−2)] · 2 H2O, — ein Kupferkomplex mit einem doppelt deprotonierten D-Xylosederivat als Ligand

Polyol Metal Complexes. VIII. R,R-trans-Diaminocyclohexane-κN,N′ Methyl-β-D-xylopyranosid-2,3-ato-κO²,O³ Aqua Copper Dihydrate, [(R,R-chxn)(H₂O)Cu(Me-β-D-Xylp2,3 H_?2)] · 2 H₂O, — a Copper Complex with a Twofold Deprotonated Xylose Derivative as a Ligand Methyl β-D-xylopyranoside forms a chelate complex with copper(II) ions in aqueous, alkaline solution after deprotonation at O-2 and O-3. In the blue crystals, Cu^II is further coordinated by R,R-trans-1,2-diaminocyclohexane and water; P2₁, a = 982.9(3), b = 705.8(5), c = 1 292.1(6) pm, β = 96.74(4)°, V = 890.2(8) · 10⁶ pm³. The alkoxide-O-atoms act as acceptors in a hydrogen bond system, a typical feature of which is a homodromic helix of water molecules.     

Microwave-assisted synthesis,crystal structures,and in vitro antibacterial studies of zinc(II) and nickel(II) complexes with Schiff bases

The syntheses of a mononuclear zinc(II) complex [ZnCl(L¹)(Amp)] (I) and a mononuclear nickel(II) complex [Ni(L²)(HL²)](BF₄) · 0.5H₂O (II) (HL¹ = 4-methyl-2-[(4-methylpyridin-2-ylimino) methyl]phenol, HL² = 4-methyl-2-[(pyridin-2-ylmethylimino)methyl]phenol; Amp = 2-amino-4- methylpyridine) were prepared under microwave irradiation. The complexes were characterized by a combination of elemental analyses, and IR and electronic spectra. Their structures were further confirmed by single crystal X-ray crystallography (СIF files CCDC nos 1437737 (I), 1437738 (II)). The Zn atom in the monomeric complex I is in tetrahedral coordination. The Ni atoms in the dimeric complex II are in octahedral coordination. Crystals of the complexes are stabilized by hydrogen bonds. In order to evaluate the biological activity of the complexes, in vitro antibacterial against Staphylococcus aureus, Bacillus subtilis, Escherichia coli, and Pseudomonas aeruginosa was assayed. The complexes have strong activity against Bacillus subtilis.     

Variation in crystalline architectures through supramolecular interactions in copper(II) complexes with tridentate N2O donor Schiff bases

Three copper(II) complexes, [Cu(L¹)(H₂O)(ClO₄)]·0.5H₂O (1), [Cu(L²)(H₂O)(ClO₄)]·0.5H₂O (2), and [Cu(L²)(NCNC(OCH₃)NH₂)]ClO₄ (3), where HL¹ = 4-bromo-2-(-(quinolin-8-ylimino)methyl)phenol and HL² = 1-(-(quinolin-8-ylimino)methyl)naphthalen-2-ol, have been prepared and characterized by elemental analysis, IR, UV–vis and fluorescence spectroscopy and single-crystal X-ray diffraction studies. The copper(II) centers assume five-coordinate square-pyramidal geometries in 1 and 2, whereas square planar copper(II) is present in 3. A methanol molecule has been inserted in the pendant end of the ligated dicyanamide in 3. Various supramolecular architectures are formed by hydrogen bonding, π?π, C–H?π, and lp?π interactions.     

Intermolecular O—H⃛O hydrogen bonding in the three independent molecules of (2S)‐3‐(4‐hydroxyphenyl)‐2‐(1‐oxoisoindolin‐2‐yl)­propanoic acid

The title compound, C₁₇H₁₅NO₄, derived from l ‐tyrosine, crystallizes with three independent mol­ecules which differ in the conformation of the asymmetric unit: the N—C—C—C_ipso torsion angles are ?71.7 (5), ?63.6 (6) and ?52.5 (5)°, respectively. Deformations in the phenol ring hydroxy O—C—C angles of 116.5 (4)/123.9 (4), 121.7 (5)/118.1 (4) and 122.4 (5)/118.6 (5)°, respectively, result from their respective intermolecular hydrogen‐bonding environments. Intermolecular O_acid—H?O=C_indole, O_phenol—H?O—H_phenol and O_phenol—H?O=C_indole hydrogen bonds, with O?O distances in the range 2.607 (4)–2.809 (4) Å, are present in combination with C—H?O and C—H?π_arene interactions. The primary hydrogen‐bonding systems assemble with graph sets R₃³(8) and R₃²(22).     

Thermal behaviour of cobalt oxides doped with ZrO2 and ThO2 and the possible cubic phase stabilization of zirconia

The effects of doping cobalt oxides with different amounts of ZrO₂ and ThO₂ (1.5–9 mol%) on the thermal stability of Co₃O₄ and the re-oxidation of CoO by O₂ to Co₃O₄ were investigated. The techniques employed were DTA, with a controlled rate of heating and cooling, X-ray diffraction, and IR spectrometry.The results obtained by DTA revealed that the addition of both Th⁴⁺ and Zr⁴⁺ (up to 6 mol%) exerted no appreciable effect on the thermal stability of Co₃O₄. Increasing the amount of the dopant ions to 9% resulted in no further change in the thermal stability of Co₃O₄ in the case of Th⁴⁺, and an increase of 16% in case of Zr⁴⁺-doping. However, ThO₂-doping of cobalt oxide was accompanied by an enhancement in the reactivity of CoO towards re-oxidation by O₂ to Co₃O₄ to an extent proportional to the amount of dopant oxide.The X-ray investigation of ZrO₂-doped cobalt oxides calcined in air at 1000°C revealed the presence of highly crystalline and stable zirconia in the cubic form. Such a stable phase could not be obtained at temperatures below 2370°C in the absence of stabilizing agents.X-ray and IR investigations of different solids showed the presence of free thoria and zirconia together with new thorium—cobalt and zirconium—cobalt compounds. However, the slow cooling of Zr-treated cobalt oxides from 1000°C to room temperature led to the decomposition of the newly formed compound. The d-spacings and absorption bands of the newly formed compounds were determined.     

SYNTHESIS, CHARACTERIZATION, THERMAL ANALYSIS, CONDUCTIVITY AND BAND GAPS OF OLIGO {4-[(2-HYDROXYL-1-NAPHTHYL)METHYLENE]-AMINOBENZOIC ACID}

The oxidative polycondensation reaction conditions of 4-[(2-hydroxyl-1-naphthyl)methylene]aminobenzoic acid (4-HNMABA) with H_2O_2,air O_2 and NaOCl were studied in an aqueous alkaline medium between 40℃and 90℃.The structure of oligo {4-[(2-hydroxyl-1-naphthyl)methylene]aminobenzoic acid} (O-4-HNMABA) was characterized by using ~1H-NMR,~(13)C-NMR,FT-IR,UV-Vis,size exclusion chromatography (SEC) and elemental analysis techniques.At the optimum reaction conditions,the yield of O-4-HNMABA was found to be 70...     

Synthesis and characterization of two acetato-bridged dinuclear copper(II) complexes with 4-bromo-2-((4 or 6-methylpyridin-2-ylimino)methyl)phenol as ligand

The synthesis and characterization of two new acetato-bridged dinuclear copper(II) complexes are described. Both compounds have the general formula [Cu(L)(µ-O₂C–CH₃)]₂, in which L = 4-bromo-2-((4-methylpyridin-2-ylimino)methyl)phenol or 4-bromo-2-((6-methylpyridin-2-ylimino)methyl)phenol. The title compounds consist of dinuclear units with bridging acetato groups and a ligand linked to each copper via the phenol oxygen and nitrogen. Both compounds were synthesized in a one-step reaction and characterized by elemental analysis, Fourier transform infrared (FTIR), electron spin resonance (ESR), and electronic spectra and by room temperature magnetic moments. The compounds exhibit antiferromagnetic interactions at room temperature. UV-Vis spectra show four absorptions attributed to d–d transitions of copper, ligand → metal charge transfer and π → π* or n → π* transitions of ligand. The FTIR spectra indicate a Cu₂O₄C₂ ring vibration. Both complexes show room temperature magnetic moments of about 1.6 B.M. per copper. The X-band ESR studies indicate a weak half-field band, characteristic of the Cu(II)–Cu(II) dimer, observed at 1552 and 1558 G for the complexes, strongly suggesting that the hyperfine structure arises from a spin triplet species. The spectra of frozen samples in DMSO or DMF at liquid nitrogen temperature show a typical Δm = 1 transition.     

Crystal Structure of the B‐type Dierbium Oxide ortho‐Oxosilicate Er2O[SiO4]

The crystal structure of B‐type Er₂O[SiO₄] has been determined by single crystal X‐ray diffraction. It crystallizes with the (Mn,Fe)₂[PO₄]F type structure in the monoclinic space group C2/c (a = 14.366(2), b = 6.6976(6), c = 10.3633(16) Å, ß = 122.219(10)°, Z = 8) and shows anionic tetrahedral [SiO₄]^4– units and non‐silicon‐bonded O^2– anions in distorted [OEr₄]¹⁰⁺ tetrahedra. The [(Er1)O₆₊₁] and [(Er2)O₆] polyhedra form infinite chains which are connected by common edges.     

Beiträge zum Koordinationsverhalten von Oxidionen in anorganischen Feststoffen. IV [1] Darstellung,Kristallstruktur und spektroskopische Charakterisierung von NiP4O11 und CaNiP2O7

Synthesis, Crystal Structures, and Spectroscopic Characterization of NiP₄O₁₁ and CaNiP₂O₇ From melts single crystals of NiP₄O₁₁ and CaNiP₂O₇ have been grown. These allowed refinement of the crystal structures (NiP₄O₁₁: C1¯, Z = 8, a = 12, 753(4)Å, b = 12.957(3)Å, c = 10.581(4)Å, α = 89.42(2)°, β = 116.96(2)°, γ = 90.20(2)°, R1 = 0.027, wR2 = 0.072 for 3058 I_o > 2σ (I_o), 3291 independent reflections, 290 parameters; CaNiP₂O₇: P1¯, Z = 2, a = 6.433(3)Å, b = 6.536(4)Å, c = 6.515(2)Å, α = 66.4(2)°, β = 87.5(2)°, γ = 82.7(2)°, R1 = 0.026, wR2 = 0.062 for 1624 I_o > 2σ (I_o), 2189 independent reflections, 101 parameter) and measurement of polarized electronic absorption spectra in the uv/vis/nir region (6000—32000 cm^—1). NiP₄O₁₁ is isotypic to the series of ultraphosphates MP₄O₁₁ (M = Mn, Fe, Co, Cu, Zn, Cd) that exhibit a two‐dimensional network formed from ten‐membered phosphate rings. CaNiP₂O₇ completes the series of diphosphates AMP₂O₇ (A: Ca, Sr, Ba; M = Cr — Zn) and is isotypic to CaCoP₂O₇. Ni²⁺ ions in both phosphates show distorted octahedral coordination. The electronic transitions associated with the chromophores [Ni²⁺O₆] are nicely reproduced by calculations within the framework of the angular overlap model (AOM). The parametrisation scheme leads to e_{σ, norm}(2.0Å) = 3690 cm^—1 and B = 896 cm^—1 (C/B = 4.2) for CaNiP₂O₇ and e_{σ, norm}(2.0Å) = 4150 cm^—1 and B = 948 cm^—1 (C/B = 4.5) for NiP₄O₁₁ (Δ_o(CaNiP₂O₇) = 6800 cm^—1; Δ_o(NiP₄O₁₁) = 7100 cm^—1).     

Metallderivate von Molekülverbindungen. VIII. catena-Poly[(2,5,8-trioxanonan-O2,O5) lithium-methylphosphanid] — eine Verbindung mit meso-Helix-Struktur

Metal Derivatives of Molecular Compounds. VIII. catena-Poly[(2,5,8-trioxanonane-O²,O⁵) lithium-methylphosphanide] — a Compound with a meso-Helix Structure Studies of Fritz et al. [10] showed methylphosphane to be lithiated at ?60°C in 1,2-dimethoxyethane or bis(2-methoxyethyl) ether solution by stoichiometric amounts of lithium n-butanide in n-hexane. After removing the hydrocarbons almost completely by distillation and cooling the solutions to ?60°C again, colourless square crystals of (1,2-dimethoxyethane-O,O′)lithium ( 1 ) and (2,5,8-trioxanonane-O²,O⁵)lithium methylphosphanide ( 2 ) precipitate. As shown by an X-ray structure determination (monoclinic, P2₁/n; a = 805.5(1); b = 1820.6(2); c = 851.5(1) pm; β = 116.76(1)° at ?100 ± 3°C; Z = 4 formula units; R = 0.034) complex 2 forms a polymer which has the shape of an up to now scarcely noted meso-helix. Four-coordinated lithium is bound to two phosphorus (P? Li 252.9 and 253.2 pm; P? Li? P 131.8°; Li? P? Li 132.1°) and to two oxygen atoms (Li? O 203.9 and 206.8; O …? O 270.7 pm; O? Li? O 82.5°) of the inherently tridentate 2,5,8-trioxanonane ligand. As compared to the standard value (185 pm) the P? C distance (187.4 pm) is slightly lengthened. Structure determinations of (2,5,8-trioxanonane-O²,O⁵,O⁸) lithium 1-(phenylsulfonyl)alkyl compounds published some years ago [26, 27], allow a comparison of molecular parameters characteristic for the twofold or threefold coordinating chelate ligand.     

The First Sodium Uranyl Chromate,Na4[(UO2)(CrO4)3]: Synthesis and Crystal Structure Determination

The first sodium uranyl chromate, Na₄[(UO₂)(CrO₄)₃], has been obtained by high‐temperature solid‐state reaction. The structure (triclinic, P1¯, Z = 2, a = 7.1548(3), b = 8.4420(3), c = 11.5102(5)Å, α = 80.203(1)°, β = 79.310(1)°, γ = 70.415(1)° V = 639.24(4)ų ) has been solved by direct methods and refined on the basis of F² for all unique reflections to R1 = 0.024 [calculated on the basis of 4374 unique observed reflections (‖F_o‖ 4σF)]. The structure is based on chains of composition [(UO₂)(CrO₄)₃] that are parallel to [1¯01]. The chains contain UrO₅ pentagonal bipyramids (Ur = Uranyl) that share all equatorial corners with CrO₄ tetrahedra. Cr(1)O₄ and Cr(3)O₄ tetrahedra bridge between two adjacent UrO₅ bipyramids, whereas Cr(2)O₄ tetrahedra share one corner with one UrO₅ bipyramid each. The [(UO₂)(CrO₄)₃] chains are planar and oriented parallel to (313). The Na⁺ cations provide linkage of the chains in the structure.     

Synthese und Kristallstruktur des Fluorid‐ino‐Oxosilicats Cs2YFSi4O10

Synthesis and Crystal Structure of the Fluoride ino‐Oxosilicate Cs₂YFSi₄O₁₀ The novel fluoride oxosilicate Cs₂YFSi₄O₁₀ could be synthesized by the reaction of Y₂O₃, YF₃ and SiO₂ in the stoichiometric ratio 2 : 5 : 3 with an excess of CsF as fluxing agent in gastight sealed platinum ampoules within seventeen days at 700 °C. Single crystals of Cs₂YFSi₄O₁₀ appear as colourless, transparent and water‐resistant needles. The characteristic building unit of Cs₂YFSi₄O₁₀ (orthorhombic, Pnma (no. 62), a = 2239.75(9), b = 884.52(4), c = 1198.61(5) pm; Z = 8) comprises infinite tubular chains of vertex‐condensed [SiO₄]^4? tetrahedra along [010] consisting of eight‐membered half‐open cube shaped silicate cages. The four crystallographically different Si⁴⁺ cations all reside in general sites 8d with Si–O distances from 157 to 165 pm. Because of the rigid structure of this oxosilicate chain the bridging Si–O–Si angles vary extremely between 128 and 167°. The crystallographically unique Y³⁺ cation (in general site 8d as well) is surrounded by four O^2? and two F^? anions (d(Y–O) = 221–225 pm, d(Y–F) = 222 pm). These slightly distorted trans‐[YO₄F₂]^7? octahedra are linked via both apical F^? anions by vertex‐sharing to infinite chains along [010] (?(Y–F–Y) = 169°, ?(F–Y–F) = 177°). Each of these chains connects via terminal O^2? anions to three neighbouring oxosilicate chains to build up a corner‐shared, three‐dimensional framework. The resulting hexagonal and octagonal channels along [010] are occupied by the four crystallographically different Cs⁺ cations being ten‐, twelve‐, thirteen‐ and fourteenfold coordinated by O^2? and F^? anions (viz.[(Cs1)O₁₀]^19?, [(Cs2)O₁₀F₂]^21?, [(Cs3)O₁₂F]^24?, and [(Cs4)O₁₂F₂]^25? with d(Cs–O) = 309–390 pm and d(Cs–F) = 360–371 pm, respectively).     

Mehrkernige Kobaltkomplexe. II. Herstellung und Struktur von [(tren) (NH3)Co(O2)Co(NH3) (tren)](SCN)4 · 2H2O

Polynuclear Cobalt Complexes. II. Preparation and Structure of [(tren) (NH₃)Co(O₂)Co(NH₃) (tren)](SCN)₄ · 2H₂O The title compound is obtained on oxygenation of [Co(tren)(H₂O)₂]²⁺ in 6M aqueous ammonia or by ligand exchange starting from [(NH₃)₅Co(O₂)Co(NH₃)₅]-(NO₃)₄. An X-ray structure determination was made. The substance forms monoclinic crystals, space group P2₁/c, lattice constants a=10,135, b=8,473, c=19,484 Å, β=108,58°, with two formula units in the cell. The final R is 0,066. The binuclear cation has a center of symmetry, so the Co? O? O? Co unit is planar; the Co? O? O angle is 111,5°. The tertiary nitrogen atoms of both chelate groups are cis to the O₂ bridge, as found in doubly bridged [(tren)Co(O₂,OH)Co(tren)](ClO₄)₃ · 3H₂O. On acidification in solution, the singly bridged cation [(tren) (NH₃)CoO₂Co(NH₃)(tren)]⁴⁺ (a) loses the bound O₂ completely. But unlike the doubly bridged cation b , the rate of dissociation of a is independent of pH (Fig. 5). At higher pH (8–10) bridging a→b (Fig. 2) occurs. Both reactions must have the same rate determining step, the first order rate constants being of the order of 2 · 10^?3 s^?1 (25°, 0,35M KCl).     

Oxidation Reaction of Phenol with H2O2 Catalyzed by Metallomicelles Made of Co(II) and Cu(II) Complexes of Imidazole Groups and Micelle as Mimic Peroxidase

The imidazole derivatives (N,N‐bis(2‐ethyl‐5‐methyl‐imidazole‐4‐ylmethyl) amino‐propane (biap)) and its complexes containing cobalt or copper ion were synthesized in this study. The oxidation reaction of phenol with oxidant H₂O₂ catalyzed by the metallomicelle made of the complexes of imidazole groups and micelle (CTAB, Brij35, LSS) as the mimetic peroxidase was studied. The results show that the reaction rate for the catalytic oxidation of phenol increases by a factor of approximately 1×10⁵ in the metallomicelle over that in the simple micelles or the pure buffer solution at pH=6.9 and 25°C. The catalytic effects changed with H₂O₂, temperature, pH, and surfactant kind in the catalytic reactive process are discussed. A kinetic mathematic model of the phenol oxidation catalyzed by the metallomicelle is proposed.