New sorption and solvation measuring methods: Forced flow through liquids and solid state fluidised bed sorbents in high pressure gravimetry

A novel measuring method is presented here that allows sorption and solvation measurements near to different process conditions. Especially for the sorption kinetics it is important that the measuring conditions are similar to later applications. Particularly for high pressure sorption measurements this claim could not be fulfilled for most technical applications.The advantage of the measuring methods presented here is that solid bed samples in high pressure gravimetry can be measured under flow-through conditions in both directions and, for the first time in high pressure gravimetry, liquid samples can be measured under flow-through conditions. Especially for ionic liquids, of which a large variety of new substances with unknown sorption potentials have been synthesised in the last few years, this results in much shorter measuring times.The first measurements presented here show that the new system allows for measuring times around 26 times shorter for an ionic liquid.     

Instability of the finite‐difference split‐step method applied to the generalized nonlinear Schrödinger equation. III. external potential and oscillating pulse solutions

This is the final part of a series of articles where we have studied numerical instability (NI) of localized solutions of the generalized nonlinear Schrödinger equation (gNLS). It extends our earlier studies of this topic in two ways. First, it examines differences in the development of the NI between the case of the purely cubic NLS and the case where the gNLS has an external bounded potential. Second, it investigates how the NI is affected by the oscillatory dynamics of the simulated pulse. The latter situation is common when the initial condition is not an exact stationary soliton. We have found that in this case, the NI may remain weak when the time step exceeds the threshold quite significantly. This means that the corresponding numerical solution, while formally numerically unstable, can remain sufficiently accurate over long times, because the numerical noise will stay small. © 2016 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 33: 633–650, 2017     

THEORY OF DIELECTRIC ELASTOMERS

In response to a stimulus, a soft material deforms, and the deformation provides a function. We call such a material a soft active material （SAM）. This review focuses on one class of soft active materials： dielectric elastomers. When a membrane of a dielectric elastomer is subject to a voltage through its thickness, the membrane reduces thickness and expands area, possibly straining over 100%. The dielectric elastomers are being developed as transducers for broad applications, including soft robots, adaptive optics, Braille displays, and electric generators. This paper reviews the theory of dielectric elastomers, developed within continuum mechanics and thermodynamics, and motivated by molecular pictures and empirical observations. The theory couples large deformation and electric potential, and describes nonlinear and nonequilibrium behavior, such as electromechanical instability and viscoelasticity. The theory enables the finite element method to simulate transducers of realistic configurations, predicts the efficiency of electromechanical energy conversion, and suggests alternative routes to achieve giant voltage-induced deformation. It is hoped that the theory will aid in the creation of materials and devices.     

一类多输出函数研究

本文研究和讨论了作为多输出函数的N级模2~M背包变换平衡特性,给出了N级模2~M平衡背包变换的结构、计数和函数性质,指出了N级模2~M平衡背包变换本身作为密码变换函数存在着除了第M路外,所有各路的输出函数都是不完全函数的弱点,从而得出了背包变换是密码学弱函数的结论.     

Numerical modeling of slug flow initiation in a horizontal channels using a two-fluid model

This paper presents a methodology for modeling slug initiation and growth in horizontal ducts. Transient two-fluid equations are solved numerically using a class of high-resolution shock capturing methods. The advantage of this method is that slug formation and growth in a stratified regime can be calculated directly from the solutions to the flow field differential equations. In addition, by using high-resolution shock capturing methods that do not contain numerical diffusion, the discontinuity generated by slugging in the flow field can be modeled with good accuracy. The two-fluid model is shown to be well-posed mathematically only under certain conditions. Under these circumstances, the two-fluid model is capable of correctly predicting and modeling the flow physics. When ill-posed, an unbounded instability occurs in the flow field solution, and the instability amplitude increases exponentially with decreasing mesh sizes. This work shows that there are three zones associated with slug formation. In addition, long wavelength slugs are shown to initiate from short wavelength waves. These short waves are generated at the interface of the two phases by the Kelvin-Helmholtz hydrodynamic instability. The results obtained through numerical modeling show good agreement with experimental results.     

CFD simulation of oil–water separation characteristics in a compact flotation unit by population balance modeling

Huge amounts of produced water are generated in offshore oil production. The Compact Flotation Unit (CFU) is an excellent pretreatment technology of produced water with high separation efficiency, low residence, and small split ratio. The Computational Fluid Dynamics-population balance model (CFD-PBM) method is used in the present work to study the oil–water separation characteristics in the self-developed Beijing Institute of Petrochemical Technology Compact Flotation Unit (BIPTCFU) at both micro-scale and macro-scale, which would help us gain more insights into the mechanism and the influence of flow field on the oil–water separation process such as the oil droplets’ diameter distribution and separation efficiency. The effects of the inlet diameter, the height of the preliminary separation zone, and the width of the annular space on the oil–water separation characteristics of CFU were discussed systematically. It is illustrated that the appropriate increase of inlet velocity, decrease of annular gap width, and increase of the height in the preliminary separation zone can effectively promote the collision and coalescence process of oil droplets. However, the overlarge height of the preliminary separation zone and the too narrow width of the annular space will both have a significant negative effect on the migration and separation of oil and water and lead to the decrease of separation efficiency.     

色散磁导率对异向介质中的调制不稳定性的影响

基于Drude模型研究了异向介质的色散磁导率对调制不稳定性的影响. 结果表明，在反常色散情形，赝五阶非线性在异向介质的负折射区中增大了调制频谱的范围及增益值，这与常规正折射介质中出现的现象正好相反；自陡峭效应在异向介质中有可能为负值，但无论正负，也无论在正折射区还是负折射区，它都抑制调制不稳定性的产生；二阶非线性色散效应在正、负折射区中分别促进和抑制调制不稳定性的产生. 在正常色散情形，由于二阶非线性色散效应的作用，使本来在常规正折射介质中不可能出现的调制不稳定性现象也能出现，这一特性为在正常色散区形成孤     

LOM and HOM damping study in a superconducting deflecting cavity for ALS at LBNL

Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes (LOM) and higher order modes (HOM) in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.