基于等效阻尼理论的金属橡胶弹性迟滞力学模型及实验研究

针对弹性多孔金属橡胶非线性迟滞特性力学行为,将迟滞恢复力-位移曲线分解为非线性单值曲线和椭圆,并将等效阻尼理论用于动态力学性能参数识别,从而建立了一种新型的适用于黏弹性阻尼材料的宏观唯象力学模型。采用不同相对密度的环形金属橡胶进行动态实验测试,以验证理论模型的准确性,结果表明该模型可将具有非线性特性的金属橡胶系统进行降阶处理,提高金属橡胶力学模型的预测效率,并能很好地描述金属橡胶的迟滞力学行为。另外,研究了在不同激励频率条件下金属橡胶的阻尼耗能特性。实验结果表明:在高频加载的条件下,黏性阻尼系数对动态加载频率不敏感,阻尼耗能与加载幅值之间呈线性正相关。基于等效阻尼理论的弹性迟滞力学模型具有一定的普适性,可进一步推广应用于类似弹性多孔材料的力学性能表征,为其工程应用提供理论基础。     

Viscous quark‐gluon plasma in the early universe

In the present work a study is given for the evolution of a flat, isotropic and homogeneous Universe, which is filled with a causal bulk viscous cosmological fluid. We describe the viscous properties by an ultra‐relativistic equation of state, and bulk viscosity coefficient obtained from recent lattice QCD calculations. The basic equation for the Hubble parameter is derived by using the energy equation obtained from the assumption of the covariant conservation of the energy‐momentum tensor of the matter in the Universe. By assuming a power law dependence of the bulk viscosity coefficient, temperature and relaxation time on the energy density, we derive the evolution equation for the Hubble function. By using the equations of state from recent lattice QCD simulations and heavy‐ion collisions we obtain an approximate solution of the field equations. In this treatment for the viscous cosmology, no evidence for singularity is observed. For example, both the Hubble parameter and the scale factor are finite at t = 0, where t is the comoving time. Furthermore, their time evolution essentially differs from the one associated with non‐viscous and ideal gas. Also it is noticed that the thermodynamic quantities, like temperature, energy density and bulk pressure remain finite. Particular solutions are also considered in order to prove that the free parameter in this model does qualitatively influence the final results.     

Towards oscillation-free implementation of the immersed boundary method with spectral-like methods

It is known that, when the immersed boundary method (IBM) is implemented within spectral-like methods, the Gibbs oscillation seriously deteriorates the calculation of derivatives near the body surface. In this paper, a radial basis function (RBF) based smoothing technique is proposed with the intention of eliminating or efficiently reducing the Gibbs oscillation without affecting the flow field outside the body. Based on this technique, a combined IBM/spectral scheme is developed to solve the incompressible Navier–Stokes equations. Numerical simulations of flow through a periodic lattice of cylinders of various cross sections are performed. The results demonstrate that the proposed methodology is able to give accurate and nearly oscillation-free numerical solutions of incompressible viscous flows.     

Geometric, variational discretization of continuum theories

This study derives geometric, variational discretization of continuum theories arising in fluid dynamics, magnetohydrodynamics (MHD), and the dynamics of complex fluids. A central role in these discretizations is played by the geometric formulation of fluid dynamics, which views solutions to the governing equations for perfect fluid flow as geodesics on the group of volume-preserving diffeomorphisms of the fluid domain. Inspired by this framework, we construct a finite-dimensional approximation to the diffeomorphism group and its Lie algebra, thereby permitting a variational temporal discretization of geodesics on the spatially discretized diffeomorphism group. The extension to MHD and complex fluid flow is then made through an appeal to the theory of Euler-Poincaré systems with advection, which provides a generalization of the variational formulation of ideal fluid flow to fluids with one or more advected parameters. Upon deriving a family of structured integrators for these systems, we test their performance via a numerical implementation of the update schemes on a cartesian grid. Among the hallmarks of these new numerical methods are exact preservation of momenta arising from symmetries, automatic satisfaction of solenoidal constraints on vector fields, good long-term energy behavior, robustness with respect to the spatial and temporal resolution of the discretization, and applicability to irregular meshes.     

Dimorphic magnetorheological fluid with improved rheological properties

A type of dimorphic magnetorheological (MR) fluid was prepared by adding wire-like iron nanostructures into the conventional carbonyl iron based MR fluid. The Fe nanowires were synthesized through reducing Fe²⁺ ion with excessive sodium borohydride in aqueous solution. The rheological behaviors of the dimorphic MR fluids were measured with a rotational rheometer and the sedimentation properties were also studied in this work. It was found that the Fe wires additives can greatly enhance the stress strength of the dimorphic MR fluids comparing with the conventional MR fluids. The sedimentation of the dimorphic MR fluids was also mitigated greatly.     

A quasi-zero-stiffness isolator with a shear-thinning viscous damper

Quasi-zero-stiffness(QZS) vibration isolators have been widely studied,because they show excellent high static and low dynamic stiffnesses and can effectively solve low-frequency and ultralow-frequency vibration. However, traditional QZS(T-QZS)vibration isolators usually adopt linear damping, owing to which achieving good isolation performance at both low and high frequencies is difficult. T-QZS isolators exhibit hardening stiffness characteristics, and their vibration isolation performance is e...     

Martingale solutions for the three-dimensional stochastic nonhomogeneous incompressible Navier–Stokes equations driven by Lévy processes

In this paper, the three-dimensional stochastic nonhomogeneous incompressible Navier–Stokes equations driven by Lévy processes consisting of the Brownian motion, the compensated Poisson random measure and the Poisson random measure are considered in a bounded domain. We obtain the existence of martingale solutions. The construction of the solution is based on the classical Galerkin approximation method, the stopping times, the stochastic compactness method and the Jakubowski–Skorokhod theorem.     

Study of the damping characteristics of sectional flight vehicles of different length

The dependence of the damping characteristics of axisymmetric tri-sectional flight vehicles executing plane oscillations about the zero angle of attack on their geometric parameters is investigated on the supersonic range of uniform oncoming air flow Mach numbers. Systematic data are obtained using the least laborious approach, namely, by calculating the steady-state inviscid flow past equivalent bodies determined from the principle of the local similarity of force interaction. Ranges of the vehicle design parameters on which the dependence of the damping moment coefficient in pitch on the length of the conical or cylindrical-conical stabilizer of the vehicle is nonmonotonic are found. Typical viscosity effects on the characteristics under study are estimated using a method based on the assumptions of the linear theory for finite-thickness bodies. It is established that the damping coefficient increases monotonically with decreasing Reynolds number; moreover, even transition to oscillation antidumping regimes is possible when the sign of the damping coefficient changes.Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 6, 2004, pp. 153–162. Original Russian Text Copyright © 2004 by Antonets and Shmanenkov.     

Implementation of CLEAR algorithm on non‐orthogonal curvilinear co‐ordinates for solution of incompressible flow and heat transfer

In this paper, the CLEAR (coupled and linked equations algorithm revised) algorithm is extended to non‐orthogonal curvilinear collocated grids. The CLEAR algorithm does not introduce pressure correction in order to obtain an incompressible flow field which satisfies the mass conservation law. Rather, it improves the intermediate velocity by solving an improved pressure equation to make the algorithm fully implicit since there is no term omitted in the derivation process. In the extension of CLEAR algorithm from a staggered grid system in Cartesian coordinates to collocated grids in non‐orthogonal curvilinear coordinates, three important issues are appropriately treated so that the extended CLEAR can lead to a unique solution without oscillation of pressure field and with high robustness. These three issues are (1) solution independency on the under‐relaxation factor; (2) strong coupling between velocity and pressure; and (3) treatment of the cross pressure gradient terms. The flow and heat transfer problems in a rectangular enclosure with an internal eccentric circle and the flow in a lid‐driven inclined cavity are computed by using the extended CLEAR. The results show that the extended CLEAR can guarantee the solution independency on the under‐relaxation factor, the smoothness of pressure profile even at very small under‐relaxation factor and good robustness which leads to a converged solution for the small inclined angle of 5^° only with 5‐point computational molecule while the extended SIMPLE‐series algorithm usually can get a converged solution for the inclined angle larger than 30^° under the same condition. Copyright © 2006 John Wiley & Sons, Ltd.     

Simulation of 2D external viscous flows by means of a domain decomposition method using an influence matrix technique

Two-dimensional external viscous flows are numerically approximated by means of a domain decomposition method which combines a vortex method and a finite difference method. The vortex method is used in the flow region which is dominated by convective effects, whereas the finite difference method is used in the flow region where viscous diffusion effects are dominant. An influence matrix technique combined with the uniformity condition of the pressure is used to enforce the tangential velocity boundary condition. Comparisons between numerical and experimental data show that the method is well adapted for simulating two-dimensional flows.