不同煤燃烧方式降低NOx排放比较及解耦燃烧应用

采用两段反应器研究了三种煤在不同燃烧方式下抑制NO_x生成的效果。结果表明,煤的热解气和部分气化生成气再燃均能较好的抑制NO_x生成,抑制效果优于空气分级燃烧,解耦燃烧方式抑制NO_x生成的效果最显著,相对于传统燃烧其NO_x排放降低了32%以上。煤种对各种燃烧方式降低NO_x的程度有明显影响,煤中单位氮含量的燃料比(固定碳/挥发分)越小,煤的热解气和部分气化生成气再燃以及解耦燃烧方式下NO_x的排放量越低。在煤部分气化生成气再燃烧方式中,部分氧化气化段通氧量不同,降低NO_x排放的效果也不同,在氧气体积分数为8%~10%时的NO_x生成量最低。基于解耦燃烧技术原理,研制了1.4 MW解耦燃烧工业锅炉,在燃烧同一煤种时,解耦燃烧锅炉和传统立式锅炉相比,烟气中NO_x排放量降低了32.9%。     

煤粉的增压富氧燃烧特性及煤灰矿物演变

为了更好地了解煤粉在增压富氧条件下的燃烧过程,利用加压热天平(PTGA)结合X射线衍射仪(XRD),研究了增压富氧燃烧条件下压力对煤粉燃烧特性及煤中矿物演变的影响。研究表明,随着压力的升高,煤粉常压时的非均相着火逐渐转变为均相着火,当压力升高到3 MPa开始向非均相着火过渡,并在5 MPa时完全转变成非均相着火。由于煤粉着火机理的转变,综合燃烧特性指数S随着压力的增加先升高后降低。不同的着火机理下,煤粉的燃烧温度也会有所差别。常压时非均相着火较高的燃烧温度使得反应生成了莫来石等矿物,而1 MPa时均相着火较低的燃烧温度则使得煤灰中出现了伊利石等矿物。压力继续升高,均相着火开始向非均相着火过渡,燃烧温度逐步升高,伊利石逐渐转变为莫来石。     

Ni的引入对Pd/Al2O3催化甲烷燃烧性能的影响

采用浸渍法制备了Ni掺杂的Pd/Al2O3催化剂,考察了其低浓度甲烷催化燃烧活性和水热稳定性.结果表明,随着Ni的引入及其含量的增加,Pd/Al2O3催化剂性能明显提高,Ni含量至20%时,在0.4%CH4,4%H2O和空气平衡的原料气组成,80000h-1空速和600oC条件下反应150h后,CH4转化率仍能保持在97.5%以上.X射线衍射、H2程序升温还原、NH3程序升温脱附和透射电镜等结果表明,NiAl2O4晶相的形成改善了载体酸性和活性组分的分散度,从而提高了催化剂性能.     

环境催化中的陶瓷材料:应用与可能性(英文)

Environmental catalysis has been steadily growing because of the advances in its scientific and engineering aspects,as well as due to the new environmental challenges in the industrial era.The development of new catalysts and materials is essential for new technologies for various environmental applications.Ceramics play important roles in various environmental applications including the identification,monitoring,and quantification of pollutants and their control.Ceramics have important applications as sensors and photocatalysts,and they are extensively used as catalyst carriers and supports.Many ceramics are being explored as catalysts for pollution control applications.Their low cost,thermal and chemical stability,and capability of being tailored make them especially attractive for pollution control applications.Although a wide variety of materials have been developed as catalyst supports,this area is still of interest with new or modified catalyst supports being frequently reported.It is of equal importance to develop new or modified processes for the loading of catalysts on specific supports.Applications like chemical looping combustion(CLC) and other catalytic combustion processes are raising the demands to a new scale.We have been working on the development of both new and modified support materials,including mesoporous materials without structural order for possible applications in CLC and other catalytic reactions.Successful attempts have been made in the modification of conventional γ-Al2O3 and improved synthesis processes for supporting perovskite type catalysts.Our research on environmental catalysis applications of ceramic materials and processes are also briefly discussed.     

介孔MgAl2O4涂层整体式氢气燃烧催化剂的制备与表征

以广义酸-碱对理论为依据,报道了一种仅利用纯无机碱和盐为原料在蜂窝陶瓷载体上制备介孔MgAl2O4涂层的方法,并通过原位酸碱反应对涂层进行CexZr1-xO2修饰和Pt的负载,成功制备出具有高催化活性的整体式氢气燃烧催化剂.通过扫描电子显微镜(SEM),X射线衍射仪(XRD)以及N2吸/脱附分析仪表征了催化剂的微观结构.结果表明复合涂层不仅具有均匀的微晶结构,而且具有高的比表面积(>250m2·g-1)和大的孔容(0.32cm3·g-1).氢气催化燃烧反应结果显示,制备的整体式催化剂具有很高的催化活性,可以在室温下快速起燃,并且氢气的初始转化率达到95%以上.     

Determination of Sulfur in Petroleum Coke Combining Closed Vessel Microwave-Induced Combustion and Inductively Coupled Plasma-Optical Emission Spectrometry

Abstract

A new procedure based on closed vessel Microwave-Induced Combustion (MIC) technique is proposed for the decomposition of petroleum coke and further determination of sulfur by Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES). The procedure is based on sample ignition by microwave radiation using closed quartz vessels pressurized with oxygen and use of NH₄NO₃ as an ignition aid. The nature and concentration of absorbing/refluxing solution were studied, as well as the operational parameters related to MIC technique. Results were compared with those obtained by conventional wet digestion in closed vessels, certified reference materials (agreement was better than 98%), and also using ion chromatography for S determination.     

Oxidation and Self-Reaction of Carboxyl Groups During Coal Spontaneous Combustion

Carboxyl groups play an important role during the development of coal self-heating. The real-time changing characteristics of carboxyl groups were obtained using an in situ Fourier Transform Infrared Spectroscopy method. They are significantly influenced by reaction atmospheres. Under dry-air atmosphere, their quantity obviously decreases before reaching 120°C and then increases with temperature rise. Under oxygen-free atmosphere, it decreases before reaching 80°C and then increases with temperature rise. In contrast with direct oxidation process, the quantity of carboxyl groups is smaller and the decrease phenomenon at the beginning almost disappears during the oxidation process following oxygen-free reaction. The results indicate that the carboxyl groups have different reaction pathways during coal self-heating. These pathways can be divided into two kinds, that is, oxidation pathways and self-reaction pathways. The study proposed the reaction sequences of carboxyl groups during coal self-heating, which are helpful for revealing the mechanism of coal spontaneous combustion.     

Preparation and Properties of Chlorinated Polyethylene-Chlorinating/Grafting-Poly (Acrylic acid) and its Sodium-Salt Ionomer

Acrylic acid (AA) was grafted onto high-density polyethylene (HDPE) by in-situ chlorination graft copolymerization (ISCGC), yielding a graft copolymer composed of chlorinated polyethylene (CPE) as backbone and poly (acrylic acid) (PAA) as branch chains. The reaction process and the preparation of its carboxylated ionomers were studied. The structure of the graft copolymer and the ionomer were characterized by FTIR, gel permeation chromatography (GPC), and degree of grafting (GD). The influence of factors related to the main and side reactions, including the monomer concentration, chlorine contents of the product, and reaction temperature were investigated. Additionally, the effects of these factors on the reaction are described. The aim of the research was to investigate how chlorinated polyethylene grafted with poly (acrylic acid) (CPE-cg-PAA) and its sodium-salt ionomer could be prepared and their relative effect on thermal and mechanical properties.     

A feasibility study of dynamic stress analysis inside a running internal combustion engine using synchrotron X‐ray beams

The present investigation establishes the feasibility of using synchrotron‐generated X‐ray beams for time‐resolved in situ imaging and diffraction of the interior components of an internal combustion engine during its operation. The demonstration experiment was carried out on beamline I12 (JEEP) at Diamond Light Source, UK. The external hutch of the JEEP instrument is a large‐scale engineering test bed for complex in situ processing and simulation experiments. The hutch incorporates a large capacity translation and rotation table and a selection of detectors for monochromatic and white‐beam diffraction and imaging. These capabilities were used to record X‐ray movies of a motorcycle internal combustion engine running at 1850 r.p.m. and to measure strain inside the connecting rod via stroboscopic X‐ray diffraction measurement. The high penetrating ability and high flux of the X‐ray beam at JEEP allowed the observation of inlet and outlet valve motion, as well as that of the piston, connecting rod and the timing chain within the engine. Finally, the dynamic internal strain within the moving connecting rod was evaluated with an accuracy of ～50 × 10^?6.     

镁颗粒群着火和燃烧过程数值模拟

建立了一维非稳态球形镁颗粒群的着火燃烧模型, 数值模拟镁颗粒群的着火和燃烧过程, 研究表明, 颗粒群着火首先发生在颗粒群边界, 随后初始的燃烧火焰会分离为两个, 一个向颗粒群内部传播, 一个向外部传播, 最终内部火焰消失, 外部火焰维持并控制着整个颗粒群的燃烧; 内火焰向颗粒群内部传播过程中, 传播速度会逐渐加快, 且火焰温度值呈逐渐降低趋势. 分析了颗粒群内部参数和环境参数对镁颗粒群着火燃烧的影响. 随颗粒浓度的增大, 颗粒群着火时间略有增长, 但火焰传播速度更快, 燃烧稳定时火焰球尺寸也更大. 颗粒群初温越高, 则颗粒群着火时间越短, 火焰传播速度也会加快, 但燃烧稳定时火焰球尺寸基本不变. 环境温度对颗粒群着火燃烧的影响较复杂, 环境温度越高, 颗粒群着火时间越短, 但火焰传播速度却越慢, 燃烧稳定时火焰球尺寸变化很小. 颗粒粒径和辐射源温度对颗粒群着火燃烧的影响较显著, 颗粒粒径越小或辐射源温度越高, 则颗粒群着火时间越短, 火焰传播速度越快, 燃烧稳定时火焰球尺寸也越大. 数值模拟结果与文献中试验结果相一致. 关键词： 粉末燃料冲压发动机 镁着火燃烧 颗粒群