Assessment of nanocomposites based on unsaturated polyester resin/nanoclay under impact loading

The aim of this study is to investigate the performance of nanoclay reinforced unsaturated polyester (UP) resin under impact loads. Nanocomposite specimens containing nanoclay in 0, 1.5, and 3 (wt%) were prepared by melt mixing method. X‐ray diffraction, transmission electron microscopy analysis, scanning electron microscope photographs, and viscosity changes in liquid state resin confirmed exfoliation and intercalation of the nanoclay in the UP resin system used. Tensile modulus showed an increase with increase in nanoclay content. However, the tensile strength and elongation at break exhibited reducing performance with increase in nanoclay content. Izod impact test results indicated better performance for the specimens containing nanoclay reinforcements, with 1.5 (wt%) of nanoclay specimens showing the highest value. High velocity impact tests were carried out using gas gun in velocity range of 20–100 m/sec and harden steel hemispherical tip projectile with diameter of 8.7 mm and weight of 11.54 g. Results for high velocity impact test indicated better performance by the specimens containing nanoclay, with 1.5 (wt%) nanoclay showing the highest attained value. Damage assessments of impact area for all specimens showed spalling type brittle failure with punch out and sever fragmentation pattern. Copyright © 2011 John Wiley & Sons, Ltd.     

实船撞击实验防撞装置的撞击力分析

实验研究了基于以钢丝绳为基本元件的新型柔性防撞装置的防护性能.利用DEWETRON数据采集仪及多通道同步采集传感器的信号,分析得到防撞装置在碰撞中受到的撞击力曲线.实验结果显示:靠近船舶撞击侧最近的非撞击侧位置受到的撞击力最大,属防护重点部位;在承受多次撞击后,防撞装置基本完好,且船舶在碰撞中的损伤也有所减低.     

Mass Spectrometric Fragmentation of 2a,4-Disubstituted 2,2a,3,4-Tetrahydro-2-phenyl-1H-azeto[2,1-d]- [1,5]benzothiazepin-1-ones Under Electron Impact Ionization Conditions and Comparison with their 2-Heteroatom Substituted Analogues

The mass spectrometric behavior of seven 2a,4-disubstituted 2,2a,3,4-tetrahydro-2-phenyl-1H-azeto[2,1-d][1,5]benzothiazepin-1-ones has been studied with the aid of mass-analyzed ion kinetic energy spectrometry and accurate mass measurements under electron impact ionization. All compounds show a tendency to eliminate a phenylketene molecule, an ethyl or benzyl radical, or a phenylketene molecule plus an SH radical. The mass spectrometric behavior of the title compounds was compared to those of 2-heteroatom-substituted analogues.     

Recovery performance and characteristics in shape memory effects of aliphatic polyether urethane

The analysis on the recovery performance and characteristics in shape memory effects is helpful for the optimal design and engineering applications of shape memory polymers and their composites. To investigate the relationships among recovery performance, material parameters, and loading conditions, by taking aliphatic polyether urethane as an example, the researchers simulate the shape memory behaviors numerically using a three‐dimensional viscoelastic model. The material parameters for this model are taken from stress relaxation tests, rather than dynamic mechanical analysis tests. Both the unconstrained and the constrained recovery behaviors during strain‐controlled shape memory processes are analyzed. The results reveal that the unconstrained recovery occurs at the same temperature regardless of the applied strain values. Another interesting result is that the shape recovery temperature in unconstrained recovery situations increases and the maximum recovery stress under constrained recovery conditions decreases with the increase of heating rates. Copyright © 2013 John Wiley & Sons, Ltd.     

Electron impact,electron capture negative ionization and positive chemical ionization mass spectra of organophosphorus flame retardants and plasticizers

Phosphate esters are important commercial products that have been used both as flame retardants and as plasticizers. To analyze these compounds by gas chromatographic mass spectrometry, it is important to understand the mass spectra of these compounds using various ionization modes. This paper is a systematic overview of the electron impact (EI), electron capture negative ionization (ECNI) and positive chemical ionization (PCI) mass spectra of 13 organophosphate esters. These data are useful for developing and optimizing analytical measurements. The EI spectra of these 13 compounds are dominated by ions such as H₄PO₄⁺, (M ? Cl)⁺, (M ? CH₂Cl)⁺ or (M)⁺ depending on specific chemical structures. The ECNI spectra are generally dominated by (M ? R)^?. The PCI spectra are mainly dominated by the protonated molecular ion (M + H)⁺. The branching of the alkyl substituents, the halogenation of the substituents and, for aromatic phosphate esters, ortho alkylation of the ring are all significant factors controlling the details of the fragmentation processes. EI provides the best sensitivity for the quantitative measurement of these compounds, but PCI and ECNI both have considerable qualitative selectivity. Copyright © 2013 John Wiley & Sons, Ltd.     

负载型CuO/TiO2催化剂催化CO2加氢制甲醇

采用浸渍法制备了CuO/TiO₂负载型催化剂,并将其用于CO₂加氢制甲醇反应。重点考察了铜的负载量对催化剂性能的影响,并对其物化性能和催化性能之间的关系进行了讨论。结果发现,随着铜负载量的增加,催化剂中金属铜的比表面先增加后减小,当铜的负载量为10%（质量百分数）时达到最大值。催化剂的表面碱性位数量随铜含量的增加持续减小,中等碱位和强碱位的强度下降。当铜的负载量不高于10%时,CO₂的转化率与铜的比表面积呈线性关系。甲醇选择性与催化剂的表面碱位性质有关,过强的碱性位会降低甲醇选择性。     

高镍负载量Ni/SiO2和低镍负载量Ni-Ce/SiO2催化CO甲烷化的比较研究

采用等体积浸渍法制备了高镍负载量的13%Ni/SiO₂(13Ni/Si)催化剂和低镍负载量的7%Ni-2%Ce/SiO₂(7Ni-2Ce/Si)催化剂.通过N₂物理吸附、XRD、FT-IR、TEM、H₂-TPR/TPD等技术对催化剂进行表征,在连续流动微反装置上考察了催化剂的CO甲烷化活性.结果表明,在7Ni-2Ce/Si催化剂中NiO、CeO₂和SiO₂之间产生的相互作用,改变了Ni-O-Si键的化学环境,促进了氧化镍物种的分散和还原,进而提高了催化剂的活性比表面积,同时在催化剂表面形成了新的中等强度的CO吸附中心.与高镍负载量的13Ni/Si催化剂相比,低镍负载量的7Ni-2Ce/Si表现出更高的CO吸附能力和甲烷化活性.常压下,在CO体积分数1%和空速7 000 h^-1的反应条件下,低镍负载量的7Ni-2Ce/Si催化剂上CO完全甲烷化最低温度为230 ℃,比高镍负载量的13Ni/Si低了30 ℃.     

Fe2O3/Al2O3氧载体用于甲烷化学链燃烧：负载量与制备方法的影响

以不同方法制备了系列Fe₂O₃/Al₂O₃氧载体,采用XRD、H₂-TPR、CH₄-TPR、O₂-TPD和BET等分析技术对氧载体进行了表征。研究了不同Fe₂O₃负载量氧载体的甲烷化学链燃烧性能,考察了不同制备方法对Fe₂O₃/Al₂O₃氧载体结构、反应性和产物选择性的影响。结果表明,Fe₂O₃负载量对氧载体活性及产物中CO₂选择性的影响较大,负载量较低时氧载体活性较低且引起甲烷部分氧化产物CO含量增加。制备方法亦对氧载体与甲烷的反应活性有所影响,整体上共沉淀法制备的质量分数60％Fe₂O₃/Al₂O₃氧载体具有较高的氧化活性和化学链循环稳定性。其在反应温度850℃、反应时间15 min、30次循环后甲烷转化率及产物中CO₂选择性均未见明显降低。     

宽离子能量检测范围垂直引入反射式飞行时间质谱仪的研制

本实验室研制了国内首台宽离子能量检测范围飞行时间质谱仪。仪器采用紧凑式电子轰击源设计,配合离子透镜系统有效的调制离子流,飞行时间质量分析器采用了离子垂直引入式,双场加速和双场反射以及大尺寸MCP检测装置设计。仪器单离子信号半峰宽约2 ns,仪器分辨率优于1600FWHM,检测实际样品质量范围为1~127 amu(仪器理论质量检测上限优于800 amu),可检测离子能量范围优于2个数量级(3~140 eV)。若该TOF质量分析器与短瞬高压脉冲放电离子源耦合联用,可广泛应用于高能离子束的快速检测,如真空阴极放电对制备薄膜、离子注入材料的表征,导电材料的离子电荷态分布以及离子扩散速度的测定等。     

Mechanistic Insights into Copper‐Catalyzed Sonogashira–Hagihara‐Type Cross‐Coupling Reactions: Sub‐Mol % Catalyst Loadings and Ligand Effects

An efficient catalytic system for Sonogashira–Hagihara‐type reactions displaying ligand acceleration in the copper‐catalyzed formation of C(sp²)? C(sp) bonds is described. The structure of the ligand plays a key role for the coupling efficiency. Various copper sources show excellent catalytic activity, even in sub‐mol % quantities. A wide variety of substituents is tolerated in the substrates. Mechanistic details have been revealed by kinetic measurements and DFT calculations.