Synthesis of aromatic poly(thioether ketone)

Aromatic poly(thioether ketone)s were prepared by the direct polycondensation of aromatic dicarboxylic acids with aryl compounds containing ether or sulfide structures using phosphorus pentoxide/methanesulfonic acid (PPMA) as a condensing agent and solvent. Polycondensation proceeded smoothly and produced aromatic poly(thioether ketone)s with inherent viscosities up to 0.73 dL/g. The synthesis of substituted aryl ketones by the reaction of substituted benzoic acids with aryl compounds in PMMA was studied in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(thioether ketone)s showed a 10% weight loss in air and nitrogen at around 450 and 460°C, respectively. © 1992 John Wiley & Sons, Inc.     

Synthesis and characterization of model 3‐miktoarm star copolymers of poly(dimethylsiloxane) and poly(2‐vinylpyridine)

3‐Miktoarm star copolymers, 3μ‐D₂V, with two poly(dimethylsiloxane) (PDMS) and one poly(2‐vinylpyridine) (P2VP) arm, were synthesized by using anionic polymerization–high vacuum techniques and (chloromethylphenylethyl)methyl dichlorosilane, heterofunctional linking agent, with two SiCl groups and one CH₂Cl group. The synthetic strategy involves the selective reaction of the two ? SiCl groups with PDMSOLi living chains, followed by reaction of the remaining chloromethyl group with P2VPLi. Combined molecular characterization results (size exclusion chromatography, membrane osmometry, and ¹H NMR spectroscopy) revealed a high degree of structural and compositional homogeneity. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 614–619, 2006     

TDI三聚体的合成研究

以一种碱金属羧酸盐K-1000作为甲苯二异氰酸酯(TDI)三聚反应的催化剂合成了以TDI三聚体为主要成分的多异氰酸酯固化剂。对合成工艺条件进行了探讨。结果表明,将反应温度控制在35℃,催化剂K-1000用量为0.06%时,用苯甲酰氯作为阻聚剂可得到性能基本稳定的TDI三聚体产品。     

Effect of Oxalic Acid on Stabilization and Property of Sb-Doped Tin Oxide Sol

Zeta potential studies show that the ATO nanoparticle surface is positively charged in pH range from 2 to 5 without oxalic acid. The addition of oxalic acid brings a charge reversal on the surface of ATO particle in a wide pH range. The interaction of oxalic acid with surface of ATO nanoparticle was studied by FTIR and indicates that the most probable mechanism is the formation of Sn-O-C bonds via the condensation reaction between the oxalic acid and surface hydroxyl groups. TEM, X-ray diffraction and UV-Vis-Near IR spectra were used to characterize the nanocrystalline ATO sol and thin gel film.     

7-十二烯基-8-羟基喹啉的合成

7-十二烯基-8-羟基喹啉是一种新型螯合型萃取剂(Kelex 100的主要成份)。它是(1a)和(1b)异构体的混合物。本文报道了利用1-氯-1,1,3,3-四甲基丁烷与过量丁二烯-[1,3]的1,4加成反应合成重要中间体1-氯-5,5,7,7-四甲基辛烯-[2](3)的方法,此法具有室温、常压、产率高、设备简单、操作方便等优点。     

去氢枞酸类成核剂改性聚丙烯的非等温结晶动力学研究

对以去氢枞酸盐为成核剂的聚丙烯非等温结晶动力学进行了研究，用修正Avrami方程的Jexiorny法和莫志深法进行处理。结果表明：修正Avrami方程的Jeziorny方法和莫志深法都适用于去氢枞酸类成核剂改性的聚丙烯的非等温结晶动力学。在同样的降温速率下纯聚丙烯的t1/2比成核聚丙烯的t1／2要长，当降温速率为20K/min时，纯聚丙烯和成核聚丙烯的t1/2分别为0．78min和0．51min。同时从莫志深法得到的F(T)结果可以看出，达到相同的结晶度时纯聚丙烯所需的降温速率要大于成核聚丙烯所需的降温速率，说明成核剂的加入提高了聚丙烯的结晶速率。从Jeziorny法求出的纯聚丙烯和成核聚丙烯的Avrami指数分别为4．46和2．77，表明成核剂改变了聚丙烯的结晶成核和生长方式。     

烷基季铵盐插层剂的合成及应用

Three novel intercalation agents were synthesized for the first time, which arose from oleic acid diethylenetriamine or triethylenetetramine 3 - chloro - 2 - hydroxypropy trimethylammonium choride (CHPTA) and chloroethanol. Organophilic vermicullites were synthesized from sodium type vermiculite by cation exchange with new intercalation agents. The results of X - ray diffraction study showed that the gallery distance of the organophilic vermiculite was enlarged from 1 nm to 5 nm or more. A new idea of making design for intercalation agent was provided.     

硼酸酯偶联剂的合成与表征

通过分子结构设计，合成了一种氮一硼内配位结构的硼酸酯偶联剂，解决了硼酸酯水解稳定性差的问题，同时分子结构中含有氨基、丁氧基等活性基团。用傅立叶变换红外光谱对硼酸酯进行了结构表征，讨论了原料配比、合成工艺等对硼酸酯收率及反应速率的影响，并通过实验确定了最佳配方及工艺。对硼酸酯的物理性能、溶解性、水解稳定性及对硼酸铝晶须的表面处理效果进行了表征。结果表明：合成的硼酸酯偶联剂由于具有氮-硼内配位作用，表现出优良的水解稳定性，并且硼酸酯偶联剂对硼酸铝晶须具有良好的表面改性效果。     

测接触角法确定偶联剂的最佳用量

偶联剂是一类能在无机填料和聚合物基材之间形成“分子桥”、改善两者之间相容性或提高两者之间相互作用能力的化合物。将经偶联剂改性的无机填料填充到聚合物中可以制得成本低、性能好的复合材料。由于偶联剂用量多少将对复合材料的性能产生较大影响,因此建立一种准确、简便地确定偶联剂最佳用量的方法有着十分重要的理论和实际应用意义。