Investigation of Glass-Like Sol-Gel Coatings for Corrosion Protection of Stainless Steel Against Liquid and Gaseous Attack

Glass-like sol-gel coatings have been investigated as corrosion protective coatings on stainless steel. Magnesium- and borosilicate coatings with thickness of about 100–700 nm and methyl-modified SiO2 coatings with a thickness of about 2 m were deposited on stainless steel plates by dip-coating. The coatings were densified between 400°C and 500°C in different atmospheres (N2, air) for 1 h. The corrosion protection against gaseous attack was investigated by accelerated corrosion tests, at 800°C in air for 1 h. A corrosion protection factor was calculated from the relation Fe/Fe2O3, determined by XRD on the surface of coated and uncoated samples. Methyl-modified SiO2 coatings showed a protection factor, which was 2 orders of magnitude higher than for the other coatings. Electrochemical investigations were performed on samples submerged in a NaCl solution for 200 h. The corrosion propagation, polarization resistance and impedance vector were measured. For accelerated corrosion tests, polarization intensity curves were determined for high potentials of up to 1 V. Again excellent results were obtained for the methyl-modified SiO2 coatings, which remained passive for 200 h. Results of the salt spray corrosion test, however, showed no corrosion protection by the sol-gel coatings. After 2000 h in the salt spray chamber the steel was corroded and the coatings peeled off. It is concluded that for the further development of these coatings an improved interfacial passivation will be required.     

耐超高温SiC(Al)纤维先驱体——聚铝碳硅烷纤维的研究

以聚硅碳硅烷(PSCS)与乙酰丙酮铝(Al(AcAc)3)为原料,在常压高温条件下反应制备出聚铝碳硅烷(PACS),经过熔融纺丝制备了PACS纤维.应用GPC、IR、XPS、29Si-NMR、27Al-NMR、TG、SEM、元素分析和增重等一系列分析,分别对PACS纤维的微观组成、结构以及性能进行了分析.研究结果表明,以原料质量配比为6∶100(Al(AcAc)3∶PSCS)合成的PACS化学式为SiC2.0H7.5O0.13Al0.018,数均分子量为1700左右,最适宜制备PACS纤维;PACS纤维中主要存在SiC4、SiC3H等结构,同时存在Si—O—Al键;在氮气气氛中,PACS纤维的陶瓷产率达到52%左右;预氧化处理,PACS纤维中Si—H键与空气中的氧反应形成Si—O—Si交联结构,较聚碳硅烷(PCS)纤维易于氧化,经过预氧化的PACS纤维陶瓷产率达到80%左右,是制备耐超高温SiC(Al)陶瓷纤维的合适纤维;用预氧化PACS纤维制备的SiC(OAl)纤维和SiC(Al)纤维抗拉强度高,耐高温性能好.     

Dynamic electrochemical impedance spectroscopy measurements of passive layer cracking under static tensile stresses

Electrochemical impedance spectroscopy allows the examination of corrosion susceptibility and resistance for different construction materials, in particular the determination of the properties of their passive films. This technique makes possible the analysis of electrochemical processes in time domain, including rapid phenomena such as changes in the properties of passive films, but it has never been used for passive layer cracking examination. In many cases, fracture of the passive film under tensile stresses leads to stress corrosion cracking. Therefore, investigations of passive layer cracking on austenitic stainless steels under tensile stresses facilitate the understanding of the mechanism of stress corrosion cracking in these common engineering materials. The effect of static tensile stresses on the passive film cracking behaviour of type 304L stainless steel immersed in 0.5 M NaCl solution at room temperature has been investigated. This paper presents the impedance spectra obtained for 304L stainless steel samples at different potential values.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Synthesis of a Novel Core-shell Type Acrylic-polyurethane Hybrid Emulsion Containing Siloxane and Fluorine as well as Water and the Oil Resistances of Cured Film

Aqueous acrylic-polyurethane dispersions have become one of the major types of materials used in coating, paint and adhesive industries, because of excellent properties and environmental advantages1-5. However, some properties for cured film such as water…     

Structure and microporous formation of cellulose/silk fibroin blend membranes: Part II. Effect of post-treatment by alkali

Blend membranes (RCF1) were prepared from mixture solution of cellulose and silk fibroin (SF) in cuoxam by coagulating with acetone–acetic acid (4:1 by volume). The blend membranes were subjected to post-treatment with 10% NaOH aqueous solution, and their structure and properties were characterized by FT-IR, X-ray diffraction, DSC, SEM and DMTA. In previous work, cellulose/SF blend membranes (RCF2) prepared by coagulating with 10% NaOH aqueous solution formed a microporous structure, in which the SF as a pore former was almost completely removed from the membrane. However, when the blend membranes RCF1 were immersed in 10% NaOH aqueous solution for post-treatment, a strong hydrogen bonding between cellulose and SF inhibited the removal of SF. Although alkali is a good solvent for SF, the blend membranes RCF1 such obtained from cellulose and SF were alkali resistant. The crystallinity and the mean pore size of the blend membranes slightly decreased with increasing post-treatment time. This work provided a cellulose/silk blend membrane, which can be used under alkaline medium.     

Uranium association with corroding carbon steel surfaces

We investigated the association of uranium with clean and corroded surfaces of 1010 carbon steel. Studying steel contaminated by uranium species will have an important effect on the development of methods used to clean radioactively contaminated metal waste. X‐ray photoelectron spectroscopy, synchrotron infrared microspectroscopy and laboratory‐based Fourier transform infrared analysis of steel surfaces exposed to uranyl nitrate showed the presence of crystallized hydrated uranyl oxides, uranyl hydroxides, iron oxyhydroxides and iron oxides. In general, heavily corroded areas physically shield the uranium species, which tended to associate spatially with hydroxyl groups and lepidocrocite. Lightly corroded areas contained uranium species with stronger axial U–O bonding. Infrared spectroscopy, Rutherford backscattering spectroscopy and energy‐dispersive spectroscopy mapping analysis revealed that the uranium species are well distributed within the upper micron of the thick corrosion layer and associated more with areas of high hydroxide content. Parameters such as the concentration of uranyl nitrate solution used to expose the carbon steel coupons, the method of contamination (dipped or sprayed with dilute uranyl nitrate solution) and the degree of corrosion (accelerated corrosion before and/or after contamination) played significant roles in the distribution and nature of the uranyl hydroxide/iron oxyhydroxide corrosion products found on the surface of all coupons. These factors must be considered in the development and optimization of decontamination processes for metal waste. Copyright © 2003 John Wiley & Sons, Ltd.     

5-Aminolaevulinic acid-mediated photodynamic therapy in multidrug resistant leukemia cells

To verify if photodynamic therapy (PDT) could overcome multidrug resistance (MDR) when it it applied to eradicate minimal residual disease in patients with leukemia, we investigated the fluorescence kinetics of 5-aminolaevulinic acid (ALA)-induced protoporphyrin IX (PpIX) and the effect of subsequent photodynamic therapy on MDR leukemia cells, which express P-glycoprotein (P-gp), as well as on their parent cells. Evaluation of PpIX accumulation by flow cytometry showed that PpIX accumulated at higher levels in mdr-1 gene-transduced MDR cells (NB4/MDR) and at lower levels in doxorubicin-induced MDR cells (NOMO-1/ADR) than in their parent cells. A P-gp inhibitor could not increase PpIX accumulation. Measurement of extracellular PpIX concentration by fluorescence spectrometry showed that P-gp did not mediate the fluorescence kinetics of ALA-induced PpIX production. Assessment of ferrochelatase activity using high-performance liquid chromatography indicated that PpIX accumulation in drug-induced MDR cells was probably regulated by this enzyme. Assessment of phototoxicity of PDT using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed that PDT was effective in NB4, NB4/MDR, NOMO-1 and NOMO-1/ADR cells, which accumulated high levels of PpIX, but not effective in K562 and K562/ADR cell lines, which accumulated relatively low levels of PpIX. These findings demonstrate that P-gp does not mediate the ALA-fluorescence kinetics, and multidrug resistant leukemia cells do not have cross-resistance to ALA-PDT.     

Photochemical aging of in situ polymerized blends of polystyrene and poly[acrylonitrile-g-(ethylene-co-propylene-co-diene)-g-styrene] (AES)

The influence of photochemical aging of in situ polymerized PS/AES blends on their mechanical properties has been studied. The PS/AES blends were subjected to photochemical aging for 168 h and 720 h. Tensile properties and Izod impact resistance of aged and non-aged samples were evaluated. The mechanical properties of the PS/AES blends are influenced by the polymerization temperature and blend composition and represent a balance between the toughness of EPDM and the stiffness of SAN in the PS matrix. Even though the impact resistance and strain at break of HIPS are higher than those of the PS/AES blends, after the aging period all PS/AES blends showed higher strain at break than HIPS. PS/AES blends present higher photochemical stability than HIPS.     

脉冲泄流时土壤条件对冲击接地阻抗的影响

 为了探寻电流脉冲泄流时，设备的接地是否有效可靠，用FDTD法分析了脉冲泄流时均一土壤、分层土壤及局部改善土壤的电导率对冲击接地阻抗（TGR）的影响。结果表明：大地电导率对冲击接地阻抗的影响很大；对均一土壤，TGR随大地电导率的增大而减小，大地电导率越大，TGR对接地体的埋深越不敏感。对分层土壤，接地体要埋在大地电导率大的土壤层中，且不要靠近交界面；局部改善大地导电性能对降低TGR效果明显，TGR对改善区域的体积非常敏感，而当电导率大于一定值时，大地电导率的再增加，对TGR的影响不明显。