Prediction of thermodynamic and surface properties of Pb−Hg liquid alloys at different temperatures

The thermodynamic properties, such as free energy of mixing, heat of mixing, activity and structural properties, such as concentration fluctuation in long wavelength limit, short-range order parameter of Pb–Hg liquid alloy at 600 K have been calculated using theoretical modelling. It has then been correlated with modified Butler model to compute the surface tension of the alloys at different temperatures. The Pb–Hg system at 600 K is found to be ordering at higher concentration of Pb.     

Improved growth of solution‐deposited thin films on polycrystalline Cu(In,Ga)Se2

CdS and Zn(O,S) grown by chemical bath deposition (CBD) are well established buffer materials for Cu(In,Ga)Se₂ (CIGS) solar cells. As recently reported, a non‐contiguous coverage of CBD buffers on CIGS grains with {112} surfaces can be detected, which was explained in terms of low surface energies of the {112} facets, leading to deteriorated wetting of the chemical solution on the CIGS surface. In the present contribution, we report on the effect of air annealing of CIGS thin films prior to the CBD of CdS and Zn(O,S) layers. In contrast to the growth on the as‐grown CIGS layers, these buffer lay‐ ers grow densely on the annealed CIGS layer, even on grains with {112} surfaces. We explain the different growth behavior by increased surface energies of CIGS grains due to the annealing step, i.e., due to oxidation of the CIGS surface. Reference solar cells were processed and completed by i‐ZnO/ZnO:Al layers for CdS and by (Zn,Mg)O/ZnO:Al for Zn(O,S) buffers. For solar cells with both, CdS and Zn(O,S) buffers, air‐annealed CIGS films with improved buffer coverage resulted in higher power‐conversion efficiencies, as compared with the devices containing as‐grown CIGS layers. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

大口径离轴凸非球面系统拼接检验技术

针对大口径离轴凸非球面面形检测的困难,本文将光学系统波像差检验技术与子孔径拼接干涉技术相结合,提出了凸非球面系统拼接检测方法。对该方法的基本原理和具体实现过程进行了分析和研究,并建立了合理的子孔径拼接数学模型。当离轴三反光学系统的主镜和三镜加工完成以后,对整个系统进行装调和测试,并依次测定光学系统各视场的波像差分布,通过综合优化子孔径拼接算法和全口径面形数据插值可以求解得到大口径非球面全口径的面形信息,从而为非球面后续加工和系统的装调提供了依据和保障。结合工程实例,对一口径为287 mm×115 mm的离轴非球面次镜进行了系统拼接测试和加工,经过两个周期的加工和测试,其面形分布的RMS值接近1/30λ(λ=632.8 nm)。     

Microstructure performance and formation mechanism of laser alloying rare earth oxides modified nanocrystalline layer on TA7

Nanoscale particles (NP) were observed in a Ni60–Ag–Si₃N₄–Y₂O₃ laser alloying (LA) layer on a TA7 titanium alloy, NP usually locate on the grain boundaries, which are able to block the motion of dislocation in a certain extent. Such layer mainly consisted of γ-Ni, TiN, γ-(Fe, Ni), TiAg and lots of amorphous phases. The wear resistance of such layer with laser scanning speed 3 mm/s was better than that of a LA layer with 6 mm/s, which was mainly ascribed to an uniform microstructure and less defect of layer. The high laser scanning speed made the existing time of laser molten pool be shorter than before, favoring the formation of a fine microstructure. However, the defects, such as pores were produced in LA layer (higher scanning speed), decreasing the wear resistance.     

DFT(B3LYP/LanL2DZ), non-linear optical and electrical studies of a new hybrid compound: [C6H10(NH3)2]CoCl4·H2O

A new organic-inorganic material [C₆H₁₀(NH₃)₂]CoCl₄·H₂O was reported. The title compound was synthesized at room temperature by slow evaporation and then characterized by a single X-ray diffraction, spectroscopic measurements, thermal analysis and dielectric technique. It crystallizes in the non-centrosymmetric space group Pna2₁ with the following unit cell parameters: a=12.5328(1) Å, b=9.0908(1) Å, c=11.7440(1) and α=β=γ=90°. The structure can be described by the alternation of two different cationic-anionic layers. It consists of isolated H₂O, isolated [CoCl₄]²⁻ tetrahedral anions and diammoniumcyclohexane [C₆H₁₀(NH₃)₂]²⁺ cations, which are connected via N–H…Cl, N–H…O and O–H…N hydrogen bonds. The Hirshfeld surface analysis was conducted to investigate intermolecular interactions and associated 2D fingerprint plots, revealing the relative contribution of these interactions in the crystal structure quantitatively. Theoretical calculations were performed using DFT/B3LYP/LanL2DZ method for studying the molecular structure and vibrational spectra and especially to examine the non-linear optical behavior of the compound. Solid state ¹³C NMR spectrum shows three signals correspond to three different carbon environments. Thermal analysis discloses a phase transition at the temperature 315 K and the evaporation of water molecule at 327 K. A detailed dielectric study was reported and shows a good agreement with thermal measurements.     

Frequency combinations in the magnetoresistance oscillations spectrum of a linear chain of coupled orbits with a high scattering rate

The oscillatory magnetoresistance spectrum of the organic metal (BEDO)₅Ni(CN)₄. 3C₂H₄(OH)₂ has been studied up to 50 T, in the temperature range from 1.5 K to 4.2 K. In high magnetic field, its Fermi surface corresponds to a linear chain of quasi-two-dimensional orbits coupled by magnetic breakdown (MB). The scattering rate consistently deduced from the data relevant to the basic α and the MB-induced β orbits is very large which points to a significant reduction of the chemical potential oscillation. Despite of this feature, the oscillations spectrum exhibits many frequency combinations. Their effective masses and (or) Dingle temperature are not in agreement with either the predictions of the quantum interference model or the semiclassical model of Falicov and Stachowiak.     

基于机械-化学的方法在硅表面制造功能化结构

"利用机械与化学结合的方法在芳烃重氮盐溶液中用金刚石刀具切削硅片,使得芳香烃分子和硅之间以共价键连接,实现了对硅片的"成形并功能化"的一步完成．研究了在大气环境如何利用金刚石刀具在硅表面加工出表面质量较好的微结构,为下一步在溶液中"成形并功能化"硅提供好的基底．在溶液中对硅表面进行可控自组装实验,初步研究了切削速度和组装时间对切削处生成自组装膜质量的影响,总结出较适合膜生长的参数．用X射线光电子能谱对自组装膜进行了检测,用扫描电子显微镜和原子力显微镜对自组装膜的表面形貌进行了表征,并用原子力显微镜对自     

Exploring artificial neural networks to model interatomic and intermolecular potential energy surfaces

We demonstrate how a back-propagation artificial neural network can be trained to represent a potential energy surface (PES) in a formless manner with limited data points and exploited to predict interaction energies for configurations not included in the training set. A similar exercise is undertaken for predicting the eigenvalues and eigenvectors of a model Hamiltonian matrix that delicately depends on parameters and exhibits crossing of eigen values.     

Grey relational analysis for optimization of wear parameters and surface roughness on nano composite coating

The higher wear resistance of Ni based nano composite coatings makes them potential replacement in protecting the substrate materials. The role of surface roughness of the coating along with wear parameters on the specific wear rate, pin temperature, and COF are addressed in the present study. The use of hard nano Al₂O₃ particles found significant role in increasing the resistance to wear for Ni matrix coatings on Al6061 material. The resistance to dislocation offered by these nano Al₂O₃ particles and smear out of debris with plastic deformation indicated abrasive and adhesive nature of wear mechanism in combination. The optimization of wear parameters are carried out by surface response method based grey relation analysis. The normal load applied onto the pin has significant influence on the specific wear rate and temperature rise in the pin. The surface roughness of the coating has also found instrumental in the higher pin temperature and friction coefficient.     

Geometric analysis of anharmonic downward distortion following paths

A mathematical aspect of the anharmonic downward distortion following (ADDF) path is discussed. The ADDF method is utilized as an automated reaction path search method, which can explore transition state geometries on a potential energy surface from a potential minimum. We show that the maximum number of the ADD stationary paths intersecting the potential minimum is 2^{f + 1} ? 2 , where f denotes the degree of freedom of the system. We also show that the bifurcation of the ADD stationary path is essential to detect all the transition states connected from a given minimum. The ADDF computation is demonstrated for a H₂O molecule in which pitchfork bifurcation is observed.