采用一体化燃煤添加剂的燃烧中固硫作用研究

针对五个不同煤种 ,研制出与之相匹配的催化燃烧及固硫一体化添加剂 ,采用高温定硫仪对其燃烧固硫效果进行了评价 ,考察了温度、Ca S摩尔比等影响因素 ,并着重讨论了一体化添加剂中催化燃烧组分的协同固硫作用。结果表明 ,一体化添加剂中的金属催化组分对CaO固硫具有较大的协同促进作用 ,固硫作用适宜的Ca S摩尔比因而可适当降低 ,一体化添加剂在燃烧固硫方面比传统单一组分固硫剂更具优越性 ,从而使催化燃烧和燃烧固硫两个过程有机地结合在一起。     

核磁共振研究MoDTP及其与ZnDTP的相互作用和机理

利用31P核磁共振谱研究了MoDTP及其与ZnDTP的相互作用，并用Timken实验机、SEM、DSC法分别考察了MoDTP与ZnDTP复合对润滑油板压、抗磨损及抗氧化性能的影响。结果表明：MoDTP与ZnDTP分子间有烷基和／或烷氧基的相互转换；二者并用在综合性能上有较好的协同增效作用。在此基础上，提出了MoDTP与ZnDTP协同增效作用的机理。     

Additives for the reduction of sulfur in FCC gasoline

Sulfur reduction ability of alumina supported zinc, gallium and zinc-gallium additives for fluid catalytic cracking catalysts was evaluated in a micro-activity test unit (MAT). Gallium/alumina showed the highest sulfur reduction of 31%, but the cracking activity of the catalyst was decreased. Zinc-gallium/alumina reduced sulfur in 24 wt.% without decreasing the base catalyst activity.     

Repleteness and regular lattice measures

Let X be an abstract set and L a lattice of subsets of X. To each lattice regular measure µ, we associate two induced measures and on suitable lattices of the Wallman space IR(L) and another measure µ on the spaceIR(L). We will investigate the reflection of smoothness properties of p onto , and µ; and try to set some new criterion for repleteness and measure repleteness.     

新型汽车发动机油用添加剂的研究进展

本文介绍了汽车发动机油用添加剂尤其是多功能添加剂的发展概况、作用机理、种类、结构及应用效果，并对未来润滑油添加剂的发展方向提供了一些参考，为我国润滑油品的高档化发展提出了几点想法。     

Efficient syntheses of zoledronic acid as an active ingredient of a drug against osteoporosis

The reaction of 1H-imidazol-1-ylacetic acid and two equivalents of phosphorus trichloride/phosphorous acid at 75?°C in sulfolane, or in the presence of catalytic amounts of [bmim][BF₄] afforded zoledronic acid in yields up to 75%. The joint use of the ionic liquid additive and sulfolane as the solvent was synergetic affording highly valuable zoledronic acid in a record yield of 93%.     

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes: Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile (PAN) and an additive of polyvinylpyrrolidone (PVP), which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm² and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.     

A perturbed martingale approach to global optimization

A new global stochastic search, guided mainly through derivative-free directional information computable from the sample statistical moments of the design variables within a Monte Carlo setup, is proposed. The search is aided by imparting to the directional update term additional layers of random perturbations referred to as ‘coalescence’ and ‘scrambling’. A selection step, constituting yet another avenue for random perturbation, completes the global search. The direction-driven nature of the search is manifest in the local extremization and coalescence components, which are posed as martingale problems that yield gain-like update terms upon discretization. As anticipated and numerically demonstrated, to a limited extent, against the problem of parameter recovery given the chaotic response histories of a couple of nonlinear oscillators, the proposed method appears to offer a more rational, more accurate and faster alternative to most available evolutionary schemes, prominently the particle swarm optimization.     

Robust multilevel methods for quadratic finite element anisotropic elliptic problems

This paper discusses a class of multilevel preconditioners based on approximate block factorization for conforming finite element methods employing quadratic trial and test functions. The main focus is on diffusion problems governed by a scalar elliptic partial differential equation with a strongly anisotropic coefficient tensor. The proposed method provides a high robustness with respect to non‐grid‐aligned anisotropy, which is achieved by the interaction of the following components: (i) an additive Schur complement approximation to construct the coarse‐grid operator; (ii) a global block (Jacobi or Gauss–Seidel) smoother complementing the coarse‐grid correction based on (i); and (iii) utilization of an augmented coarse grid, which enhances the efficiency of the interplay between (i) and (ii). The performed analysis indicates the high robustness of the resulting two‐level method. Moreover, numerical tests with a nonlinear algebraic multilevel iteration method demonstrate that the presented two‐level method can be applied successfully in the recursive construction of uniform multilevel preconditioners of optimal or nearly optimal order of computational complexity. Copyright © 2013 John Wiley & Sons, Ltd.     

Specific interaction between fluorine atoms and thiol groups accounting for higher domain purity and photostability in narrowband BHJ systems

In order to explore the role of fluorine atoms on photostability as well as morphology control of active layer in the presence of 1,4‐butanedithiol (BT), the four polymers with or without fluorine atoms in the backbones including polythieno[3,4‐b]thiophene/benzodithiophene, poly[(4,8‐bis‐(2‐ethylhexyloxy)‐benzo(1,2‐b:4,5‐b9)dithiophene)‐2,6‐diyl‐alt‐(4‐(2‐ethylhexanoyl)‐thieno[3,4‐b]thiophene‐)‐2‐6‐diyl)], poly[4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b;4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(4‐(2‐ethylhexyl)‐3‐fluorothieno[3,4‐b]thiophene‐)‐2‐carboxylate‐2‐6‐diyl)], and poly[4,8‐bis‐(2‐ethyl‐hexyl‐thiophene‐5‐yl)‐benzo[1,2‐b:4,5‐b0]dithiophene‐2,6‐diyl]‐alt‐[2‐(20‐ethyl‐hexanoyl)‐thieno [3,4‐b]thiophen‐4,6‐diyl] were selected for comparison. It is found that the specimens containing fluorine atoms in polymer backbones showed of higher stability after illumination for 1 h in the presence of BT additive, contributing to the higher domain purity. The specific interaction between fluorine atoms and thiol groups was demonstrated by the appearance of novel absorption peak at 2663.1 cm^?1, in addition to the broadening of peak at 2556.2 cm^?1 ascribing to S? H stretching vibration as confirmed by Fourier transform infrared (FTIR) spectroscopy. The finding may guide the accurate use of thiols as effective solvent additive in morphology and stability optimization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 941–951