Overwriting information: Correlations,physical costs,and environment models

In this sequel to our previous study of the entropic and energetic costs of information erasure [N.G. Anderson, Phys. Lett. A 372 (2008) 5552], we consider direct overwriting of classical information encoded in a quantum-mechanical memory system interacting with a heat bath. Lower bounds on physical costs of overwriting – in both “single-shot” and “sequential” overwriting scenarios – are obtained from globally unitary quantum dynamics and entropic inequalities alone, all within a referential approach that grounds information content in correlations between physical system states. A heterogeneous environment model, required for consistent treatment of sequential overwriting, is introduced and used to establish and relate bounds for various cases.     

高温高压Li3N-hBN体系cBN转变的热力学分析

以经典热力学第二定律ΔG<0为依据,分析了静态高温高压触媒法合成立方氮化硼(cBN)过程中发生的可能反应.考虑温度和压强对反应物相体积的影响,计算了六方氮化硼(Li3N-hBN)体系中hBN+Li3N→Li3BN2,h BN→cBN及Li3BN2→Li3N+cBN反应在高温高压条件下的ΔG.结果证实,Li3BN2由Li3N与hBN在高温高压(T>1300 K,P>3.0 GPa)条件下反应得到,在cBN的合成(T=1600～1800 K,P=4.6～6.0 GPa)条件下,hBN和Li3BN2都有向cBN转化的倾向,但由hBN向cBN直接转变的反应自由能比Li3BN2分解生成cBN的反应自由能更负,反应的可能性更大.探讨了高温高压条件下立方氮化硼的转变机理。     

基于第一性原理方法研究ReOx在ReOx-Rh/ZrO2和ReOx-Ir/ZrO2催化的甘油氢解反应中的作用机制

采用密度泛函理论研究了ZrO₂负载的Ru基、Rh基以及Re改性的Rh基、Ir基催化剂上甘油氢解生成1,2-丙二醇和1,3-丙二醇的热力学过程, 重点考察了ReO_x调变催化剂活性和选择性的作用机制. 结果表明, Ru/ZrO₂和Rh/ZrO₂催化剂上甘油分解经由脱水-加氢反应途径, 1,2-丙二醇的生成是热力学有利过程, 其中Ru基催化剂活性更高. 在Re修饰的Rh基和Ir基催化剂上, 反应遵循直接氢解机理, 其中金属表面解离的氢原子进攻ReO_x团簇上与醇盐紧邻的C-O键是催化甘油转化为丙二醇最核心的步骤. ReO_x-Rh/ZrO₂催化剂上1,2-丙二醇为主要产物, 并伴随1,3-丙二醇的生成, ReO_x的修饰则显著提高了Ir/ZrO₂催化剂上1,3-丙二醇选择性. 与单金属催化剂上发生的间接氢解机理相比, 修饰催化剂上1,3-丙二醇选择性的提高可主要归因于Rh(Ir)-Re协同催化的直接氢解反应过程, 其中羟基化铼官能团有利于末端醇盐中间体的生成. ReO_x-Ir/ZrO₂催化剂上较大的Ir-Re团簇使得末端金属醇盐的立体优选性比次级醇盐更为突出, 从而具有最高的1,3-丙二醇选择性.     

有机膨润土结构对吡虫啉吸附热力学和动力学的影响机理

为深入了解有机膨润土结构对农药吸附性能的影响机理,论文制备十六烷基三甲基氯化铵(HTMA)载量系列变化的有机膨润土,通过吸附热力学和动力学研究了新烟碱杀虫剂吡虫啉与改性有机膨润土的相互作用和影响农药分子在有机膨润土层间扩散的结构因素。结果显示,季铵盐改性削弱了膨润土片层与吡虫啉的静电结合,但是增强与吡虫啉的疏水相互作用。吡虫啉吸附动力学与有机膨润土层间结构密切相关,低载量(<0.8′CEC)的HTMA对膨润土层间距的影响很小,但是层间堆积密度的增加导致吡虫啉吸附速率常数急剧下降。HTMA载量的进一步增加导致其层间排列方式由单层平铺向双层平铺的转变,层间距急剧增加使得吡虫啉吸附速率常数略有增大。     

Effective biosorption of arsenic from water using La(III) loaded carboxyl functionalized watermelon rind

Arsenic is highly toxic and carcinogenic element that mainly enters into our body through drinking water and caused adverse effect even at low concentration. A new type of cation exchanger is developed from waste biomass of watermelon rind after increasing the carboxyl functional groups by saponification. Saponified Watermelon Rind (SWR) was further loaded with La(III) to attenuate the contamination of As(III) from water. Characterization of biosorbent was performed using Fourier Transform Infra-Red (FTIR) spectroscopy, Field emission Scanning Electron Microscopy (Fe-SEM,) Energy Dispersive X-ray (EDX) spectroscopy and zeta potential analysis. Arsenic speciation of sorption product through X-ray photoelectron spectroscopic (XPS) analysis revealed that As(III) is partially converted into As(V) during biosorption process. The biosorption tests for As(III) were explored under different operating conditions. La(III)-SWR towards As(III) biosorption was best described by Langmuir biosorption isotherm and pseudo second order kinetic model. At a pH of 12.08, the optimum biosorption capacity was found to be 37.73 ± 0.12, 48.78 ± 0.09, 62.50 ± 0.11 mg/g, respectively at temperatures 298 K, 303 K and 308 K. The existance of chloride and nitrate showed negligible interference whereas sulphate and phosphate significantly inhibits As(III) biosorption. Thermodynamic study showed spontaneous and endothermic nature As(III) biosorption onto La(III)-SWR. The sorbed As(III) was eluted almost completely using 2 M NaOH. The findings of this study insinuated that La(III)-SWR biosorbent investigated in this study can be a low cost, environmentally benign and eco-friendly material for the treatment of aqueous solution polluted with arsenic ions.     

Microwave-Assisted Graft Copolymerization of Cellulosic Fibers for Removal of Heavy Metal Ions from Aqueous Solution

Functional materials obtained from cellulosic biofibers have gained attention due to the growing demand for them in the field of wastewater remediation. In view of the technological significance of functionalized cellulosic biofibers in wastewater treatment, the present study is a green approach to functionalized cellulosic fibers through graft copolymerization under microwave irradiation. The grafted cellulosic polymers were subsequently subjected to heavy metal ion adsorption studies in order to assess their application in wastewater remediation. The effects of pH, contact time, temperature, and metal ion concentration were studied in batchwise adsorption experiments. The Langmuir, Freundlich, and Tempkin models were used to show the adsorption isotherms. The maximum monolayer capacities, q _m. calculated using the Langmuir isotherm for Zn²⁺, Cd²⁺, and Pb²⁺ were found to be 37.79, 69.68, and 96.81 mg/g respectively. The thermodynamic parameter ΔH° and ΔG° values for metal ion adsorption on functionalized cellulosic fibers showed that adsorption process was spontaneous as well as exothermic in nature.     

镁铝类水滑石对阳离子染料中性红的吸附及机理研究

研究了镁铝类水滑石对中性红的吸附及其作用机理,考察了时间、pH、温度、电解质浓度等因素对吸附作用的影响。结果表明,镁铝类水滑石对中性红的吸附动力学符合准二级动力学方程,热力学符合Langmuir吸附等温式。在实验范围内,吸附量随溶液pH的增大而增加,随温度的升高而降低,随电解质浓度的增加先增加后降低。吸附过程是放热、熵减小的自发过程。镁铝类水滑石对中性红的吸附缘于为类水滑石与中性红分子中π电子的较强静电吸引作用。     

Thermodynamic and shape memory properties of TPI/HDPE hybrid shape memory polymer

The traditional processing technology of shape memory polymer composites is complex and the cost of high performance filler is high. Therefore, low-cost high density polyethylene (HDPE) was introduced into trans-1,4-polyisoprene (TPI) matrix as reinforcing phase, and a novel shape memory polymer was prepared by mechanical melt blending, which fully exerted the excellent properties of plastic and rubber. Because of the difference in molecular chain distribution between different blend ratios of TPI/HDPE hybrid SMPCs specimens, the change of the blend ratio of the two components affects the thermodynamic and shape memory properties of the SMPCs. A series experimental results show that the TPI/HDPE hybrid SMPCs with the blend ratio of 80/20 has excellent thermodynamic and shape memory properties. And we believe that the relevant conclusions of this study can provide valuable design reference for the development of high-performance TPI SMPCs.     

烷基链工程对两亲有机半导体热力学性能影响的研究

Due to their special polar structure, amphiphilic molecules are simple to process, low in cost and excellent in material properties. Thus, they can be widely applied in the preparation of functional film materials and bionics related to cell membranes. Therefore, amphiphilic organic semiconductor materials are receiving increasing attention in research and industrial fields. The structure of organic amphiphilic semiconductor molecules usually consists of three functional parts: a hydrophilic group, a hydrophobic group, and a linking group between them. The adjustment of their correlation to achieve the target performance is particularly important and needs experimental discussion regarding synthetic methodologies. In this work, we focused on the engineering of a substituent alkyl-chain, and an amphiphilic functional molecule (benzo[b]benzo[4, 5] thieno[2, 3-d]thiophene, named C_nPA-BTBT, n = 3–11) was proposed and synthesized. This molecule links the hydrophobic semiconductor backbone and hydrophilic polar group through alkyl chains of different lengths. Fundamental properties were investigated by nuclear magnetic resonance (NMR) and ultraviolet-visible spectroscopy (UV-Vis) to conform the structure and the band gap properties of the designed organic semiconductor. Thermodynamic features were investigated by thermogravimetric analysis (TGA) and corresponding differential thermal gravity (DTG), which indicate that the functional molecule C_nPA-BTBT (n = 3–11) has a great stability in ambient conditions. Moreover, the results show that the binding ability of the amphiphilic molecule to water molecules was regulated by the odd-even alternating effect of the alkyl chain and the intramolecular coupling with BTBT. Furthermore, differential scanning calorimetry (DSC) and polarized optical microscopy (POM) were used to study the material properties in detail. As the length of the alkyl chain increased, the functional molecule C_nPA-BTBT (n = 3–11) gradually changed from "hard" species with no thermodynamic changes to a transition one with a pair of thermodynamic peaks, and eventually to a "soft" one as a typical liquid crystal with clear observation of Maltese-cross spherulites. The cooling and freezing points were further studied, and the values and trends of their enthalpy and corresponding temperature fluctuated and alternated due to the volume effect, odd-even alternating effect, flexibility, and other functions of the alkyl chain. Three molecular models were proposed according to the thermodynamic study results, namely the brick-like model, transition model, and liquid crystal model. This work presents in-depth discussion on material structure and corresponding thermodynamic properties, and it is an experimental basis for the design, synthesis, optimization, and screening of target performance materials.     

Thermodynamics,a suitable reporter in the design of mercury (II) ion selective electrodes

A fully functionalised calix[4]pyrrole derivative, namely, meso-tetramethyl-tetrakis[(diethylthiocarbamoyl)phenoxy] calix[4]-pyrrole, 1 has been synthesised and structurally characterised. Its complexing properties with metal cations in acetonitrile were investigated with particular emphasis on the thermodynamics of these systems. These data and those previously reported for a partially functionalised calix[4]arene based receptor, 5,11,17,23-tetra-tert-butyl[25,27 bis(diethylthiocarbamoyl)oxy]calix[4]arene, 2 were used to, i) further corroborate their use to predict the selectivity coefficients of carrier mediated mercury (II) ion selective electrodes (ISEs) and ii) to obtain approximate stability constant data from selectivity coefficients. The optimum working conditions of both electrodes were determined. It is shown that while the ISE based on 1 is characterised by a wider linear range and a lower mercury (II) detection than the one based on 2, the latter has the advantage of lower interference of other metal cations due to the much lower stability constants of bivalent cations relative to Hg(II). The response characteristics of these electrodes are compared with those found in the literature. SEM micrographs along with EDX spectra of the PVC membranes containing ionophore 1 or 2 unloaded and loaded with Hg(II) are reported.