Theoretical investigation on submicron particle penetration through circular tubes inside a porous medium

The analytical infinite series solution of submicron particle transport in a circular tube bounded by a porous wall, such as a pinhole, is determined under the slip velocity boundary condition, and the solution is verified by using the experimental data in the previous studies for the specific cases. The results show that particle penetration rate increases with the increase of the porous parameter, the axial pressure drop, and the pinhole radius, whereas it decreases with increasing the pinhole length. The penetration rate of nano-particles are more sensitive to the variation of these parameters. However, the differences between the penetrations of particles ranging from 0.3 μm to 1 μm are not evident because the diffusion becomes weak gradually in this size range. In addition, a further comparison is performed between the analytical solution and the existing studies, and approximate expressions are presented for accurate calculation of particle penetration rate through pinholes appearing in porous materials including filter devices and masks.     

Real‐Time Monitoring of Transport of Chlorinated Hydrocarbons from Industrial Areas Using Open‐Path FTIR Spectrometry with COL1SB

Abstract

Open‐path Fourier transform infrared (FTIR) spectrometry was used to continuously monitor 11 chlorinated hydrocarbon species in the region connecting two different industrial complexes for 24 hr. The single‐beam spectra obtained from open‐path FTIR were analyzed by newly developed software named COL1SB, which generates site‐specific background spectra as well as path‐averaged water vapor concentrations in addition to performing regression analyses. The path‐averaged water vapor concentrations calculated by the COL1SB agreed very well with those measured by a thermo‐hygrometer. In addition, site‐specific background spectra were generated by accounting for chemical absorption of 50 chemical species. The accurate estimation of path‐averaged water vapor concentrations, as well as the usage of site‐specific background spectra, enables chlorinated hydrocarbons to be measured by open‐path FTIR spectrometry at the ppb level. Among 11 chlorinated hydrocarbons considered here, trichlorofluoromethane, carbon tetrachloride, trichloroethylene, and tetrachloroethylene were identified as major chlorinated hydrocarbons having concentrations above 1 ppb. Wind affected the temporal variations of these chlorinated hydrocarbons, indicating the importance of local transport. However, the effect of wind differed from one species to another because of different source characteristics.     

Restructuring of force networks

The compaction of granular packings or soils is a collective process which for higher densities becomes increasingly slower reaching glassy behaviour. We present a study of this problem from various points of view, in particular we will represent the evolving force network that percolates through the system by an inverse fiber rupture model. Received 15 March 2002 and Received in final form 29 July 2002     

Preparation and characterization of Pt-supported porous graphite nanofibers

In this work, porous graphite nanofibers (PGNFs) were manufactured as promising catalyst supporter by a physical activation method for direct methanol fuel cells, and Pt nanoparticles were loaded on the PGNFs in order to prepare electrode materials by a chemical reduction method. The pore structures of the Pt/PGNFs were analyzed by N₂ adsorption isotherms at 77 K. Electrocatalytic activities of final products were investigated by voltammetry and conductivity measurements in a 1.0 M CH₃OH/0.5 M H₂SO₄. As a result, electrocatalytic activities of Pt/PGNFs were increased in the presence of Pt particles on the PGNFs and with increasing the specific surface area of the carbons.     

Strongly nonlinear luminescence in oxidized porous silicon films

Partially oxidized free-standing porous silicon films show a strongly superlinear increase in photoluminescence (PL) intensity above a threshold cw excitation intensity of 10 W/cm². The PL-intensity increase can be expressed by a power law with n9 as a function of the excitation intensity. The PL-peak wavelength of this emission is slightly redshifted from that at low-excitation levels. These changes are fully reversible and reproducible, but not observed in samples on substrate. We attribute this behavior to thermal reexcitation of carriers trapped at the dangling bond states in initially nonluminescent Si nanocrystallites.     

Viscoelastic characterization of compacted pharmaceutical excipient materials by analysis of frequency-dependent mechanical relaxation processes

A newly developed method for determining the frequency-dependent complex Young's modulus was employed to analyze the mechanical response of compacted microcrystalline cellulose, sorbitol, ethyl cellulose and starch for frequencies up to 20 kHz. A Debye-like relaxation was observed in all the studied pharmaceutical excipient materials and a comparison with corresponding dielectric spectroscopy data was made. The location in frequency of the relaxation peak was shown to correlate to the measured tensile strength of the tablets, and the relaxation was interpreted as the vibrational response of the interparticle hydrogen and van der Waals bindings in the tablets. Further, the measured relaxation strength, holding information about the energy loss involved in the relaxation processes, showed that the weakest material in terms of tensile strength, starch, is the material among the four tested ones that is able to absorb the most energy within its structure when exposed to external perturbations inducing vibrations in the studied frequency range. The results indicate that mechanical relaxation analysis performed over relatively broad frequency ranges should be useful for predicting material properties of importance for the functionality of a material in applications such as, e.g., drug delivery, drug storage and handling, and also for clarifying the origin of hitherto unexplained molecular processes.     

A method for rapid characterization of diffusion

This paper describes a method to determine molecular displacements as a function of time in just two scans: one reference scan using the Carr-Purcell-Meiboom-Gill (CPMG) sequence, a second scan using a modified CPMG sequence (KCPMG). Measurements on free diffusion in bulk fluids, and on restricted diffusion in porous rock samples are reported. This technique can also be used for rapid measurement of flow and chemical exchange.     

基于M-Z干涉的光纤围栏系统实验研究

对基于M-Z干涉技术的光纤围栏系统进行了实验研究.讨论并分析了M-Z干涉技术在光纤围栏系统中的应用原理.利用M-Z干涉技术和互相关技术,在总计60 km的光纤上进行了单点和两点扰动的原理性实验.在采样速率为20 MHz时,理论上最高可达10 m的定位准确度.     

Investigations on Pd:SnO2/porous silicon structures for sensing LPG and NO2 gas

P-type porous silicon (PS) structure has been prepared by anodic electrochemical etching process under optimized conditions. Photoluminescence studies of the PS structure show emission at longer wavelengths (red) for the excitation at 365 nm. Scanning electron microscope investigations of the PS surface confirm the formation of uniform porous structure, and the pore diameter have been estimated as 25 μm. Pd:SnO₂/PS/p-Si heterojunction with top gold ohmic contact developed by conventional methods has been used as the sensor device. Sensing properties of the device towards liquefied petroleum gas (LPG) and NO₂ gas have been investigated in an indigenously developed sensor test rig. The response and recovery characteristics of the sensor device at different operating temperatures show short response time for LPG. From the studies, maximum sensitivity and optimum operating temperature of the device towards LPG and NO₂ gas sensing has been estimated as 69% at 180 °C and 52% at 220 °C, respectively. The developed sensor device shows a short response time of 25 and 57 s for sensing LPG and NO₂ gases, respectively. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Structural complexity of disordered surfaces: Analyzing the porous silicon SFM patterns

This paper introduces a relative structural complexity measure for the characterization of disordered surfaces. Numerical solutions of 2d+1 KPZ equation and scanning force microscopy (SFM) patterns of porous silicon samples are analyzed using this methodology. The results and phenomenological interpretation indicate that the proposed measure is efficient for quantitatively characterize the structural complexity of disordered surfaces (and interfaces) observed and/or simulated in nano, micro and ordinary scales.