非晶硅薄膜的低温快速晶化及其结构分析

在镀铝的廉价玻璃衬底上高速沉积的非晶硅薄膜在不同的温度下退火10min.退火温度为500℃时,薄膜表面形成了硅铝的混合相,非晶硅薄膜开始呈现了晶化现象 退火温度为550℃时,大部分(约80%)的非晶硅晶化为多晶硅,平均晶粒尺寸为500nm 退火温度为600℃时,几乎所有的非晶硅都转化为多晶硅,其平均晶粒尺寸约为15μm.     

On the construction of samples for testing approximate optimization methods for estimate calculation algorithms

To validate approximate optimization schemes for estimate calculation algorithms (ECAs), it is necessary to compute the optimal height, which cannot be done in a reasonable amount of time. A variety of samples are built for which the optimal height of the ECAs is known by construction.     

过氧聚钨酸薄膜上光栅的制备

用过氧聚钨酸（PPTA）水溶液，通过离心涂膜法在显微镜载玻片上制备了具有光滑表面且厚度为100nm的PPTA薄膜，利用PPTA薄膜在紫外光照下可研制光栅以及其它光学元件的薄膜材料，具有很高的利用价值。     

Implementation of a Nonzero-order Joint Transform Correlator Using Interferometric Technique

The implementation of a nonzero-order joint transform correlator using the double port Mach-Zehnder interferometric technique is proposed and demonstrated. This approach provides on-line processing for directly removing the zero-order components of a joint power spectrum in one step and performs the nonzero-order optical correlation. Experimental results are presented and discussed.     

液体可视图象序列中杂质小目标的检测方法

在分析红外图象和视图象差异的基础上，研究了一种适用于可视图像序列的运动小目标检测算法。受目标影响的象素点具有较弱的时间相关性，即相对普通象素点有较大的时间方差，根据此特征，用管道更新的方法产生新方差图象序列，再用管道更新的方法累积，增加信噪比，然后用基于统计均值的自适应门限方法分割出目标，最后将原图象的梯度倒数作为象素点强度的加权，有效地抑制灰度突变边界的传感器噪音，保存目标点。     

进口畸变条件下改善压气机性能的数值研究

依据"非定常两代流型"理论,验证了二维叶栅在均匀进气条件下,施加激励对其性能所起的改善作用,尔后重点研究了进口具有总压的周向畸变时,施加激励对其气动性能的影响。计算结果表明,在有无进口畸变时,施加一定的激励都会改善流场结构,气动参数有积极变化,压升和效率增加,特别是在流量比较小时,变化尤为明显.对于进口畸变和施加激励影响压气机性能的内在原因,从流场结构的变化方面进行了初步分析。     

Temperature effect on deposition rate of silicon nitride films

Temperature effects on deposition rate of silicon nitride films were characterized by building a neural network prediction model. The silicon nitride films were deposited by using a plasma enhanced chemical vapor deposition system and process parameter effects were systematically characterized by 2⁶⁻¹ fractional factorial experiment. The process parameters involved include a radio frequency power, pressure, temperature, SiH₄, N₂, and NH₃ flow rates. The prediction performance of generalized regression neural network was drastically improved by optimizing multi-valued training factors using a genetic algorithm. Several 3D plots were generated to investigate parameter effects at various temperatures. Predicted variations were experimentally validated. The temperature effect on the deposition rate was a complex function of parameters but N₂ flow rate. Larger decreases in the deposition rate with the temperature were only noticed at lower SiH₄ (or higher NH₃) flow rates. Typical effects of SiH₄ or NH₃ flow rate were only observed at higher or lower temperatures. A comparison with the refractive index model facilitated a selective choice of either SiH₄ or NH₃ for process optimization.     

Residual currents and corridor of flow in the Rio de la Plata

The Rio de la Plata is a large and shallow water body that discharges onto the Atlantic Ocean. The main driving forces for the river flow are the bathymetry, tides, the outflow from the Paraná and Uruguay rivers and the winds. A numerical model covering the entire river was set up with the objective of increasing our understanding of the hydrographical features and morphological dynamics in the Estuary. The simulations revealed a counter-clockwise residual circulation in the Samborombón Bay and an eastward net flow near the Uruguayan coast. The residual flow is forced by both the tides and the bathymetry. The residence time for the entire river ranges from 40 to 80 days. However, residence times above 120 days was found in the Samborombón Bay. Three corridors of flow have been identified.     

基于二次插值的非饱和土壤水流问题的特征差分方法及数值模拟

本文针对一类非饱和土壤水流问题,提出了基于二次插值的特征差分格式,得到了严谨的L2模误差估计.并作了数值试验,指明方法的有效性.     

Energy of formation for and liquid binary alloys

We have investigated the free energy of formation for Ag_xIn_1-x and Ag_xSn_1-x liquid binary alloys at temperatures 1173 and 1250 K, respectively. A microscopic theory based on the first order perturbation has been applied. The interionic interaction and a reference liquid are the fundamental components of the theory. The interionic interaction is described by a local pseudopotential. A liquid of hard spheres (HS) of two different effective diametres and charges is used to describe the reference system. The results of the calculations for energy of formation agree very well with the available experimental data. Our calculations also reveal that a simple perturbative approach along with appropriate effective pair potentials can produce nearly quantitative results for the concerned alloys.