电流并联负反馈放大器实验的研究

用实验的方法，研究电流并联负反馈对放大器性能的改善，提出电流型、并联型负反馈放大器性能参数的测量方法。     

Application of stochastic optimal control to the suboptimal design of thrust-mass profiles

Stochastic optimal control techniques are applied to compare the performance of identical medium-range air-to-air missiles which have different thrust-mass profiles. The measure of the performance is the probability of reaching a lock-on-point with a favorable range of guidance and flight parameters, during a fixed time interval [0,t _f ], given that, during the flight, the trajectories of the missile are subjected to a variety of constraints including dynamic pressure constraints.     

用多路逆磁系统测量热电子环磁镜中热电子沿轴向的分布

本文介绍了多路逆磁测量方法及利用这一方法在ＨＥＲ装置上测量热电子环沿轴向的长度与晃荡电子密度的轴向分布的实验结果。     

基于光子数目比较的激光测距法

提出了一种新颖的激光测距方法。该方法避开了传统激光测距法中使用复杂辅助电子设备对脉冲计时或比较相位差的过程,而主要通过光学手段分析和提取待测距离信息,最终通过比较大量光子数目的方法求得待测距离。并利用单轴晶体的双折射和全内双反射性质,用特殊结构的单块LiNbO3晶体设计了实施该方法的主体装置。结果表明,该激光测距法同目前普遍使用的激光测距法相比,不但简化了结构,而且有很高的测距精度,从而为激光测距开拓了一种新的思路。     

“Slow” active control of combustion instabilities by modification of liquid fuel spray properties

This paper describes an experimental investigation of the feasibility of using “slow” active control approaches, which “instantaneously” change liquid fuel spray properties, to suppress combustion instabilities. The objective of this control approach was to break up the feedback between the combustion process heat release and combustor pressure oscillations that drive the instability by changing the characteristics of the combustion process (e.g., the characteristic combustion time). To demonstrate the feasibility of such control, this study used a proprietary fuel injector (Nanomiser^TM), which can vary its fuel spray properties, to investigate the dependence of acoustics–combustion process coupling, i.e., the driving of combustion instabilities, upon the fuel spray properties. This study showed that by changing the spray characteristics it is possible to significantly damp combustion instabilities. Furthermore, using combustion zone chemiluminescence distributions, which were obtained by Abel’s deconvolution synchronized with measured acoustic data, it has been shown that the instabilities were mostly driven midway between the combustor centerline and wall, a short distance downstream from the flame holder, where the mean axial flow velocity is approximately zero in the vortex near the flame holder. The results of this study strongly suggest that a “slow” active control system that employs controllable fuel injectors could be effectively used to prevent the onset of detrimental combustion instabilities.     

Performance evaluation of fiber Bragg grating sensors by digital holographic technique, strain gauge measurement

In view of the growing interest for non-destructive tests of materials, geodynamical monitoring and in general remote sensing, there is a great effort to bring practical optical sensors from research labs to industrial and environmental applications. In this paper, we employ digital holographic technique as an efficient tool for evaluating the strain measurement capability of fiber Bragg gratings (FBG). A cantilever beam has been employed as a test structure under loading test. The strain measurements results obtained by fiber-based sensors have been compared to those obtained by using full-field digital holographic technique and point-wise strain gauge sensors glued on the same cantilever beam. A simple theoretical model is also presented to interpret and compare the experimental results coming from different techniques.     

量子测量对三维光子晶体中Λ型原子动力学性质的影响

讨论了量子测量对各向异性光子晶体中Λ型激发态原子衰减的影响，主要包括衰减的抑制和加速效应.研究发现，这样的量子测量效应不仅与原子共振频率相对于光子晶体带边的位置有关，还与量子测量本身的频率大小相关.由于各向异性光子晶体的影响，较小频率的量子测量也能得到抑制衰减的效应. 关键词： 量子测量 量子Zeno 和 反Zeno效应 光子晶体     

拟线性椭圆变分不等式的障碍最优控制问题

对拟线性椭圆变分不等式的障碍最优控制问题(即以障碍为控制变量)进行了研究．指标泛函为Lagrange型,其中含有控制变量二阶导数的p次幂,这使得最优性条件的推导颇为不易．对所考虑的问题给出了最优控制的存在性定理以及必要条件．     

一类It型非线性时滞关联随机大系统的分散鲁棒控制

在非线性项满足全局Lipschitz条件下,本文研究了一类It型非线性时滞关联随机大系统的分散鲁棒控制问题.系统的时滞是关于状态和控制输入的.基于Lyapunov泛函及线性矩阵不等式(LMI)的分析方法,得到了无记忆状态反馈控制器使整个时滞关联随机大系统可镇定的充分条件.     

两指标双F统计过程控制图

当产品质量指标服从二元正态分时,可用T2控制图与Λ控制图联合判断产品生产的过程是否处于受控状态。本文利用T2统计量与F统计量、Λ统计量与F统计量之间的关系,得到了两指标情形下两类基于F分布统计量的统计过程控制图,简称双F统计过程控制图,并给出了控制图应用实例。