球形钨合金破片空气阻力系数实验研究

 实验研究了理想球形钨合金破片和经历爆轰驱动的球形钨合金破片长距离飞行时的速度衰减规律。实验结果表明：（1）对于理想球形钨合金破片，在同一初始速度条件下，衰减系数为常数，空气阻力系数与初始速度有关，两者成线性关系；（2）对于经历爆轰驱动的球形钨合金破片，由于有轻微的质量损失和变形，速度衰减规律与理想球形钨合金破片有明显的区别，空气阻力系数与飞行速度有关，两者成线性关系。     

二次风率对分级进风燃烧室内湍流燃烧与NOx生成的影响

本文在分级进风燃烧室的热态实验装置上,测量了燃烧室内湍流燃烧的温度场和组分浓度场,研究了分级进风的流量比率即二次风率对燃烧及NOx生成的影响.得到了四组不同二次风率下燃烧室内气体温度和O2、CO2、CO与NO浓度的分布.     

Continuous flame oxidation in supercritical water

Abstract

Continuous flames have been observed in Supercritical water oxidation (scWO) of isopropyl alcohol (IPA), using a vertical continuous reactor with sapphire windows and a mixing nozzle. Two types of continuous flame were confirmed: the one was long pale blue colored and the other was red short cone shaped, changing blue to red at around air ratio 2.0. The flame was strongly influenced by IPA concentration, air ratio and design of the mixing nozzle. Results for decomposition of PA are presented for IPA concentrations ranging from 600 up to 28260 ppm as TOC and initial reactor temperatures, were mostly around 490°C, at 25 MPa. Decomposition rate at steady state was over 99.9%. Experimentally measured CO₂ and O₂ concentrations at the flue gas were in good agreement with theoretically calculated values. Even for low air ratio as 1.1, high decomposition rate without CO, NO, NO₂ was achieved.     

Chemical Kinetics Database and Predictive Schemes for Humid Air Plasma Chemistry. Part I: Positive Ion–Molecule Reactions

Reliable kinetic and thermodynamic data are required to model the evolution of electric discharge or electron-beam decomposition chemistry of gases in humid air streams. In this first segment of a continuing series, we provide a core database describing the initially dominant ion-neutral molecule reactions in humid air plasmas. Recommended reaction rate data and extrapolation tools are presented in a manner to facilitate prediction of reactivities and reaction channels as a function of temperature, pressure, and applied electric field.     

一步法制备钯纳米粒子修饰的多孔金电极及其对溶解氧的电催化

建立了只需一步操作即可完成在抛光洗净的金微盘阵列电极上进行多孔化处理和钯纳米粒子修饰的方法。通过对金微盘电极连续施加3个电位,分别实现金的氧化、金的还原和电沉积钯纳米粒子。利用扫描电镜和电化学方法监控制备过程,得到的结果证实了本方法的可行性和有效性。考察了溶液pH值与氧化时间对结果的影响,在磷酸盐缓冲溶液(pH7)中氧化90s,得到的修饰电极的电化学活性面积是裸电极的42倍。同时,由于整个过程不需要更换溶液,且只需开启一次仪器,大大简化了实验操作。将制备的修饰电极用于溶解氧的电催化,对溶解氧的灵敏度达到0.1mA·L/(cm2·mg),优于文献报道结果。     

A Stochastic Model for Transport of Particulate Matter in Air: An Asymptotic Analysis

A branching particle system with changes of size is considered as a model for transport of particulate matter in air. This type of model is motivated by problems arising in the context of air pollution. High-density fluctuation limits for the process recording the positions and sizes of the particles through time are presented. These results allow to compute approximate probabilities for the temporal and spatial concentrations of particles of given sizes (in particular the small-sized pollutant particles which pose a health hazard).     

喷水室典型空气处理过程中空气流速的实验研究

针对纺织厂空调系统的核心-喷水室,研究喷水室内处理空气的冷却减湿和等焓加湿两个典型热湿交换过程。提出Re准数对传热传质有显著作用,而Re数的大小取决于流体速度。通过实验研究当空气流速从3m/s提高到5m/s时对喷水室热湿交换性能的影响,从而确定空气流动速度因素对两个热湿交换效率的影响趋势。根据拟合的数学曲线,总结出当空气的流动速度提高后,热湿交换效率相应提高。从而推动高速喷水室在实际工程中的应用。     

Research into conditions of quantitivity in the determination of carboniles in complex air matrices by adsorptive solid phase microextraction

This study focuses on certain aspects of the quantitivity of adsorptive solid phase microextraction when applied in the form of on-fibre derivatisation with O-(2,3,4,5,6)-pentafluorobenzyl-hydroxylamine hydrochloride (PFBHA) for the determination of carboniles in air samples of relevance in the atmosphere. The study was performed in the high-volume outdoor atmospheric simulation chambers (EUPHORE) located in Valencia (Spain). At short sampling times, the adsorption profiles obtained when only benzaldehyde was inserted in the chamber coincided with those obtained when other carbonylic compounds were also introduced at the same concentration, and this was also the case when the concentration of all the gaseous mixture components was increased considerably from one experiment to another. In a number of experiments applying different conditions, it was proven that all the extraction profiles belonged to the same regression when the fibre responses were plotted against the concentration-time product. A number of calibrations were obtained for benzaldehyde introduced in the chamber alone and in a mixture with three other carboniles at similar concentration values. A statistical test is applied to confirm that they all belonged to the same regression since they shared homogeneous variances. After these tests, the method of SPME on-fibre derivatisation for the determination of carboniles was considered to be safely applicable to quantification. Moreover, the concentration levels at which certain unwanted effects, i.e., displacement, saturation and competition, were observed are a few orders of magnitude higher than their occurrence levels in atmospheric processes.     

Improved method for shipboard determination of iron in seawater by flow injection analysis

A flow injection analysis (FIA) catalytic spectrophotometric method for the determination of dissolved iron in seawater was further developed to yield a more sensitive assay with a low detection limit. The method employs an initial sample acidification step followed by an iron pre-concentration step involving an in-line 8-hydroxy-quinoline (8-HQ) metal-chelating resin column. The copper capacity and elution efficiency, as well as the iron FIA performance of three trace-metal clean resins were compared, resulting in the selection of a clean silica gel support for the 8-HQ ligand. The concentrated sample is eluted from the resin with an acidic carrier and mixed with reagents, initiating an iron-catalyzed, color-forming reaction. Increasing the reaction temperature from 18 to 30 °C doubled the sensitivity; reaction temperature control was necessary to obtain good reproducibility in the field. Reagent blanks were as low as 0.05 nM and a detection limit of 0.016 nM was obtained from three times the S.D. of a 0.06 nM seawater sample repeated six times. A 0.06 nM detection limit was calculated from shipboard experiments where total dissolved iron was determined for 10 different samples from the same station. The instrumental sensitivity and precision evolved to the point where the blank associated with the technique is the major factor influencing its detection limit.     

Surface pressure‐area curves compression isotherm of sericin Langmuir monolayer

The Langmuir monolayer of sericin protein was studied by means of surface pressure (π)—molecular area (A) isotherms at different pH subphase. The monolayer of sericin exhibits typical phase transition phenomena at pH 2, pH 4.8, pH 7 and pH 11, respectively, including from gas state to gas‐liquid state and finally to condensed solid state. However, the monolayer of sericin on pH 11 subphase appears to be solid state. Copyright © 2007 John Wiley & Sons, Ltd.