Modification of Absorption of a Bulk Material by Photonic Crystals

We show theoretically that it is possible to modify absorption of a bulk absorbing material by inserting another non-absorbing dielectric slab periodically to form one-dimensional photonic crystals.It is found that,for frequencies within photonic bandgaps,absorption is always suppressed.For frequencies located at photonic bands,absorption can be suppressed or enhanced,which depends on the relative values of the real refractive index of the absorbing and non-absorbing dielectric layers.     

Fluorescence Microscopy of Nanoscale Silver Oxide Thin Films

The experimental conditions for photoactivated intermittent fluorescence from nanoscale silver oxide were studied with fluorescence microscopy.Strong fluorescence was observed from the Ag2O particles with size of 10-20nm excited with both blue and green light .We observed the saturation of Photoexcitation with blue light and explained the experimental results using the model of agglomeration of silver atoms to form small clusters and the fluorescence of Ag2 and Ag3 clusters.     

像增强器用中波红外辐射可激励的新型荧光材料

1 引言目前,许多研究都集中于研制各种用途的中波红外成像系统。这些应用从工业用热成像一直扩展到探测车辆、导弹等的军用热成像。可反映中波红外成像目前技术水平的是加工碲镉汞、锑化铟等半导体探测器的线阵或面阵,并把它们组装到一适当光学成像系统。但是,材料和器件的产额低,这种器件不仅制作难而且成本高。本文介绍一种加工成本低用于中波红外成像的新型探测介质,具体地讲,这种新介质是一种可将中波红外     

POROSITY CALCULATION OFMIXTURES OF FIBROUS PARTICLES

The initial forming of fiber blend to high green density, i.e. the packing of fibrous particles, is important to the reinforcement of composite materials. It is very useful to develop a general predictive method for the optimum selection of particle mixtures for the property control of ceramic or composite products. This paper presents such a mathematical model developed on the basis of the similarity analysis between the spherical and non-spherical particle packings and assesses its applicability to the packing of fibrous particles with discrete and/or continuous length distributions. The results indicate that the model can predict this packing system well and hence provide an effective way to solve various packing problems in the composite materials processing.     

Cr^4＋：YAG可饱和吸收特性测量

测量了Cr4+:YAG材料的可饱和吸收特性,用多种数据分析方法处理了实验结果,Cr4+:YAG的基态吸收截面σgs=11×10-19cm2,激发态吸收截面σes=1.2×10-19cm2。     

GaAs/AlAs超晶格的近共振喇曼散射研究

本文介绍GaAs/AlAs超晶格的室温近共振喇曼散射测量结果。由于超晶格中Fr?hlich相互作用的共振增强效应,GaAs LO声子偶模的散射得到了很大的增强。和前人的结果一样,在偏振谱我们观察到了偶模。但和前人的结果不同,在退偏振谱中我们观察到的是奇模,而不是偶模。从而证明了在近共振条件下LO声子限制模仍遵从与非共振时一样的选择定则。二级喇曼散射实验结果表明,在偏振谱中二级谱是由两个偶模组合而成,而在退偏振谱中的二级谱与前人的结果不同,由一个奇模与一个偶模组合而成。上述结果与最近提出的黄朱模型的预言是一 关键词：     

超软X射线流气式正比计数管

介绍了一种用于测量183～933eV超软X射线的圆柱形、侧窗式、流气式正比计数管,工作气体是0.11MPa的P-10气体或氦气-丙烷混合气体。计数管内径为φ25mm,直径为φ0.3mm的入射窗是由厚度80～90μgcm~2聚乙烯甲醛制成的。该计数管的特点:(1)薄窗,对软X射线透过率高。(2)流气式,工作寿命长。(3)能量分辨率好。(4)计数率高(1×10~(14)个/s)。(5)可测能区宽(0.183～10keV)。(6)可以方便更换窗膜材料、厚度及窗口直径。近几年来该计数管已经为高强度低能X光源提供较好监测。     

同步辐射光电子能谱表征MgO在GaAs（100）上淀积过程中的氧物种

用同步辐射光电子能谱表征了不同氧分压下通过热蒸发镁在ＧａＡｓ（１００）面制备氧经物超薄膜过程中的氧物种，结果表明表面氧物种的形式与镁氧配比有关，较高的氧分压下于形成活泼的分子离子等氧中间体，因此通过控制镁氧比可以制备高效的薄膜模型催化剂或适合于功能材料集成的规则氧化物过渡层，氧物种的形式可以通过能谱中不同的原子或分子轨道电子跃迁来有效地区分。     

超稳Y沸石制备技术对沸石铝分布的影响 Ⅱ.均匀铝分布的超稳Y沸石的制备

对水热处理后得到的USY沸石作进一步的酸处理以及采用改进的氟硅酸盐溶液骨架富硅工艺,分别得到了经XPS剖面分析证实为铝分布均匀的超稳Y沸石HAY-Ⅰ和HAY-Ⅱ。IR分析表明,在酸处理过程中从USY沸石中去掉的那部分非骨架铝类与3690cm~(-1)处羟基有关,仍残留在HAY-Ⅰ沸石中的那部分非骨架铝类与3670cm~(-1)和3600cm~(-1)处羟基有关。XRD和化学分析表明HAY-Ⅰ沸石仍含有约50％的非骨架铝类,而HAY-Ⅱ沸石则基本上不含非骨架铝类,HAY-Ⅱ沸石还显示更高的结晶保留度。DTA分析表明,HAY-Ⅰ和HAY-Ⅱ两种沸石的热稳定性均高于USY沸石。