Co-P非晶态合金电子性质和局域结构的理论研究

根据Co P非晶态合金结构的短程有序和结构中可能存在P -P相互作用的实验事实 ,选择了单磷原子簇模型ConP(n =1～ 5 )和双磷原子簇模型ConP2 (n =1～ 4 ) ,用密度泛函理论方法对其进行计算 .结果表明 ,在单磷Co2 P( 2 ) 、Co3 P( 1) 及Co4P( 2 ) 模型体系中 ,Co原子供给P原子电子 ,与电负性规则一致 ,同时Co和P之间具较强化学作用 ,可以形成稳定的原子簇 ;而在双磷和单磷原子簇Co5P( 1) 模型体系中 ,形成的原子簇不稳定 ,采用单磷Co2 P( 2 ) 、Co3 P( 1) 及Co4P( 2 ) 模型能较好地反映Co P非晶态合金的结构特点 .     

Origin of the 420 nm Absorption Band and Effect of Doping Fluorine in PbWO4 Crystals

The electronic structures for three types of PbW04 (PWO) crystals, the perfect PWO, the PWO containing lead vacancy (PWO-Vpb) and fluorine doped PWO crystal (F^-：PWO), are systematically studied within the framework of density functional theory. The computational results show that the Pb 6s state situates below the valence band so that Pb^2 ions are unable to trap holes forming Pb^3 or Pb^4 to compensate for VPb^2-. The hole-trappers in PWO-Vpb are O^2- ions. Two of the longer-bond O^2- ions share a hole forming O2^3-, and four of the longer-bond oxygen ions trap two holes forming an associated color centre [O2^3--Vpb-O2^3-], which may be the origin of the 42Onto absorption band. It is also concluded that the doping of F^- would reduce the band gap and F^- ions substituting for O^2- can effectively restrict the formation of [O2^3--Vpb-O2^3-] and weaken the 42Onm absorption band and hence enhance the scintillation property of PWO.     

Structural and Electrical Characteristics of Pb（Zr0.53,Ti0.47）O3 Thin Films Deposited on Si （100） Substrates

Pb(Zr0.53, Ti0.47)O3 (PZT) films were directly deposited on Si substrates without a buffer layer by pulsed laser deposition. Only(110)-oriented PZT peaks (other than Si substrate peaks) were observed from the XRD data. The electrical properties of the PZT/Si capacitor were characterized in terms of both the capacitance versus voltage (C-V) and current versus voltage (I-V) measurements. The clockwise trace of the C-V curve shows ferroelectric polarization switching, as is expected. From the I-V curves, the Schottky emission and spacecharge-limited-current behaviour are found to be the mainly leakage current mechanism in a certain electric field range in the negative and positive bias, respectively.     

具有急慢性阶段的MSIS流行病模型阈值和稳定性结果

系统研究了具有急性和慢性两个阶段的MSIS流行病模型.由两节构成,第1节建立和研究了具有急慢性阶段的MSIS流行病模型;第2节在第1节的基础上建立和研究了具有慢性病病程的MSIS流行病模型.第1节的模型是四个常微分方程构成的方程组.第2节的模型既含有常微分方程,又含有偏微分方程.运用微分方程和积分方程中的理论和方法,得到了这两个模型再生数R0的表达式.证明了当R0<1时,无病平衡态是全局渐近稳定性,给出了各模型地方病平衡态的存在性和稳定性条件.     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

薄铝埋点等离子体K线光谱半定量诊断

高温等离子体系统中存在等离子体流体力学运动演化过程、离子的离化分布演化动力学过程、高剥离态离子谱发射过程及发射芬光辐射输运过程等，而且高温等离子体系统通常是非平衡系统，所以定量研究高温等离子体系统的发射X光谱和高温等离子体对X光的吸收是一个非常复杂的问题。为了模拟和解释实验测得的激光等离子体发射光谱，提出了一种薄埋点靶：直径为φ200μm厚度为0．1μm的铝点埋在20μm厚的CH膜底衬中，表面再覆盖0．1μm厚CH膜。     

Development of Vacuum Monitoring System in the HL-2A tokamak

HL-2A is the first divertor tokamak in China. The vacuum system is one of the important parts of the HL-2A tokamak, which has to be work well during the physics campaign in 2004. As the tokamak machine is separated from the operation staff during discharges, to guarantee the safe and reliable operation of the vacuum system, it is necessary to watch the vacuum system outside the machine hall with an automatic monitoring system. The paper describes the design and manufacture of the monitoring system.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

双脉冲电子束源实验

2MeV直线感应加速器注入器系统由电子束产生器和脉冲功率系统组成。电子束产生器包括由感应腔组成的阴极电压叠加器、阳极电压叠加器和真空二极管及束输运系统。脉冲功率系统则包含初级功率源Marx、次级功率源Blumlein线和触发系统，其作用是为感应腔提供一个具有数十纳秒平顶宽度的高压脉冲，激发感应腔在感应腔间隙上获得一个加速电场。在2MeV注入器功率系统中，4个Blumlein线的充气开关是由发散装置的输出触发信号进行导通控制的。通过控制发散输出触发信号到达Blumlein线开关的时间，即可以实现Blumlein线开关在不同时间内触发导通，使Blumlein线依据所设定的时间顺序输出激励脉冲，从而在真空二极管上获得高压脉冲串。由于功率系统采用的是182C结构，即一根Blumlein线驱动两个感应腔，因此最多可以实现四脉冲串列。     

基于面阵探测器6／9MeV新型高能工业CT系统

研制成功的6MeV高能工业CT集成检测系统采用磁控管驱动的6MeV射频加速器作为X射线源，成像系统与9MeV高能工业CT相同，扫描方式采用三维锥束扫描。主要技术指标与9MeV工业CT系统接近，其空间分辨率也达到21p／mm（10％的调制度下）。