Change in Continuous Detonation Wave Propagation Mode from Rotating Detonation to Standing Detonation

We perform a three-dimensional numerical simulation based on a one-step chemical reaction model to investigate changes in the mode of H2-Air detonation wave propagation from rotating detonation wave （RDW） mode to standing detonation wave mode. The physical characteristics of an RDW with injection velocity of 500 m/s are analyzed to investigate the physical mechanisms involved. We find that with increasing injection velocity, the detonation wave gradually changes from perpendicular to the head wall to parallel to the head wall. When the injection velocity exceeds the Chapman-Jouguet velocity VCJ （about 1984 m/s）, the detonation wave changes orientation to become perpendicular to the fuel injection direction, and the rotating mode changes accordingly to a standing mode. Finally, the plane detonation characteristic triple-wave structures can be found from the standing mode.     

AVERAGE ONESIDED WIDTHS OF SOBOLEV AND BESOV CLASSES

The article concerns the average onesided widths of the Sobolev and Besov classes and the classes of functions with bounded moduli of smoothness. The weak asymptotic results are obtained for the corresponding quantities.     

光源频谱宽度对Bessel光束亮暗梯度的影响

分析了三种不同频谱宽度的光源(激光、绿光LED和白光LED)产生无衍射贝塞尔(Bessel)光束亮暗环的梯度。分别模拟得到在不同位置的光强截面图,并计算各亮暗环的光强值,引入对比度的计算公式,计算了三种不同频谱宽度的光源产生贝塞尔光束亮暗环的对比度,可以得到频谱宽度越宽的光源产生的贝塞尔光束亮暗环之间的对比度降低,亮暗环强度梯度下降,从而导致囚禁粒子的能力降低。根据三种光源的特性设计了实验装置,并在与理论模拟相应的位置分别拍摄了三种不同频谱宽度光源产生的无衍射光斑图。对实验中拍摄到的光斑图进行对比度计算,可以得知频谱宽度越宽的光源产生的无衍射光束,其截面光斑亮暗环的对比度降低,亮暗环强度梯度降低,囚禁粒子能力下降,理论和实验相吻合。     

锑掺杂氧化锡粉体的太赫兹透射特性

以SnCl45H2O和SbCl3为原料,采用液相化学共沉淀法制备锑掺杂氧化锡（ATO）粉体。分析了不同Sb掺杂质量分数条件下,ATO粉体的禁带宽度变化,并对材料在0.2~1.6 THz波段的透射时域和频域谱,以及吸收和屏蔽参数进行了对比分析。结果表明,ATO粉体的禁带宽度随着Sb掺杂量的增加先减小后增大;同时,ATO粉体对THz波的吸收系数随着Sb掺杂量的增加先增大后减小,当Sb掺杂质量分数为9%时,ATO的吸收系数在1.25 THz处达到最大值156.5 cm-1,屏蔽效能在1.24~1.60 THz范围内最高达到45.0 dB。     

Bernstein <Emphasis Type="Italic">n</Emphasis>-widths of Besov embeddings on Lipschitz domains

In this paper, using an equivalent characterization of the Besov space by its wavelet coefficients and the discretization technique due to Maiorov, we determine the asymptotic degree of the Bernstein n-widths of the compact embeddings Bq0s＋t（Lp0（Ω））→Bq1s（Lp1（Ω））, t〉max{d（1/p0-1/p1）, 0}, 1 ≤ p0, p1, q0, q1 ≤∞,where Bq0s＋t（Lp0（Ω）） is a Besov space defined on the bounded Lipschitz domain Ω ？ Rd. The results we obtained here are just dual to the known results of Kolmogorov widths on the related classes of functions.     

High optical-efficiency integral imaging display with a gradient-aperture parallax barrier

We propose a one-dimensional integral imaging (1DII) display that consists of a display panel and a gradient-aperture parallax barrier. The gradient-aperture parallax barrier is symmetrical, and its slit widths gradually increase from both sides to the middle. The leftmost and rightmost slits are used to fix the viewing angle, whereas the other slits are used to increase the optical efficiency. A prototype of the proposed 1DII display is developed. Its optical efficiency is higher than that of the conventional display, but the viewing angles are the same.     

Effects of prism beam expander and slits on excimer laser linewidth narrowing module

Theoretical simulation and experiments based on a prism beam expander and an echelle grating are conducted to study the dependence of linewidth and pulse energy on incidence angle and slit width. With a larger prism incident angle or narrower slit width, the linewidth becomes narrower while the laser pulse energy becomes lower. However, the pulse energy can be improved by optimally designing the prism beam expander. In addition, a subpicometer linewidth ArF laser is obtained with a double-prism beam expander and an echelle grating.     

Studies of super-short pulse generated by a free-electron lasers at perfect synchronism

Three-dimensional （3D） simulations and theoretical analyses on super-short pulse generated using free- electron lasers （FELs） at perfect synchronism are carried out with the help of our 3D OSIFEL code. The evolution of longitudinal pulse width in the Japan Atomic Energy Research Institute （JAERI） experiment is simulated. The results show that the optical pulse is compressed on successive passes due to the slippage between the optical and electron beams, and an ultra-short 221-fs optical pulse is finally obtained, which agrees with the experiment. Furthermore, to shorten wavelength such as soft ultraviolet （SUV） spectrum range, an ultra-short pulse generated at perfect synchronism is analyzed and studied. Finally, the relationship between the optical pulse length compressed and the peak electron beam current is calculated. It shows that the higher the electron beam current, the shorter the output FEL width length, due to the higher gain.     

Mode locked Er-doped fiber laser with single-wall carbon nanotube saturable absorber

A mode locked Er-doped fiber laser based on a single-wall carbon nanotube saturable absorber is demonstrated. A high quality single-wall carbon nanotubes （SWCNTs） absorber film is fabricated by a polymer composite. The pulse duration is 488 fs with 9.6-nm spectral width at the center of 1564 nm. The repetition rate is 30.4 MHz. The maximum output power is 3 mW. And the single pulse energy is 0.1 nJ.     

风力机叶尖加小翼动力放大特性实验研究

本文在风力机的叶尖上通过添加V型平板小翼实验,提高了风力机的输出功率.在风洞实验研究中,进行了不同长度和宽度,不同前张角和后张角小翼的探索.实验表明小翼对风力机在一定尖速比λ范围内可以提高功率系数cp值.