Formation of SnO2 Nanoparticles on External Surface of NaY Zeolite

Tin dioxide nanoparticles of 5 nm in size were prepared on NaY zeolite external surface by impregnation of SnCl2 solution and subsequent calcination at 623 K. A SnO2-NaY based chemical sensor for detecting H2 was demonstrated.     

本征导电聚合物的智能性

在化学掺杂或电化学掺杂过程中，性质发生可逆性变化的本征导电聚合物是一种潜在的智能材料，可望实现或部分实现传感、处理和执竽功能，适于制成电机执行器、智能窗、化学分离与释放体系、传感器和非线性光学器件等。     

金属有机导体、半导体和超导体

本文综述了三类金属有机固体化合物的合成、结构与导电性能。这三类化合物是金属有机电荷转移盐,金属酞菁和会属卟啉络合物,以及金属有机夹层化合物。     

CARRIER PHOTOGENERATION IN POLY（N-VINYL-CARBAZOLE）-BASED PHOTOCONDUCTIVE THIN-FILM DEVICES

In this paper, photoexcitation processes in the bilayer devices based on inorganic materials and poly（N-vinylcarbazole） （PVK） were investigated. In order to clarify the roles of inorganic materials in photoconductive properties of bilayer devices, TiO2 and ZnS were chosen to combine with PVK. A model for generation of photocurrent （Iph） in single layer device of PVK was obtained. It is deduced that the recombination rate constant （Pcomb） and the ionization rate constant （y） ofexcitons should be considered as the most important factors for Iph. For inorganic materials （TiO2 or ZnS）/PVK bilayer devices, in reverse bias of-4 V, the photocurrent of 115 mA/cm^2 in the TiO2/PVK device was observed, but the photocurrent in the ZnS/PVK device was only 10 mA/cma under the illumination light of 340 nm and the light intensity of 14.2 mW/cm^2. The weaker photocurrent is attributed to the absorption of ZnS within UV region and the energy offset at the interface between PVK and ZnS, which impedes the transport of charge carriers.     

Organosoluble and transparent polyimides derived from alicyclic dianhydride and aromatic diamines

Organosoluble polyimides were synthesized with the alicyclic dianhydride 1,8‐dimethylbicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride and aromatic diamines. The polyimides possessed good solubility both in strong dipolar solvents and in common solvents; the thermal decomposition temperature of the polyimides exceeded 420 °C. Strong and flexible films of the polyimides, with the cutoff of ultraviolet–visible absorption lower than 310–320 nm, exhibited good features as the alignment layers for nematic liquid crystals with pretilt angles of 1.5–2.9°. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 110–119, 2002     

Photocatalytic Synthesis of Composite CdSe/CdS Nanoparticles

We have shown that CdSe/CdS nanocomposites can be obtained in a photocatalytic reaction with participation of CdS nanoparticles from sodium selenosulfate. We have studied the kinetic characteristics of this process in detail and have shown that its most likely mechanism includes a step involving reaction between SeSO^3/2− anions and electrons generated in the conduction band of the CdS nanoparticles during irradiation and stabilized in traps on the semiconductor surface.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 3, pp. 171–175, May–June, 2005.     

Analysis of thermal behaviour of high power semiconductor laser arrays by means of the finite element method (FEM)

New results of steady-state two-dimensional finite-element computations of temperature distributions of high power semiconductor laser arrays are presented. The influence of different thermal loads on the 2D temperature distribution in AlGaAs/GaAs gain-guided laser arrays is investigated. TheFEM model is tested by comparing it with analytical solutions. For numerical convenience, the latter is rewritten in a novel form, which is free of overflow problems. The maximum temperatures calculated by both methods agree within 1%. Several factors determining the thermal resistance of the device are quantitatively examined: the ratio of light emitting to non-emitting areas along the active zone, the amount of Joule losses, the current spreading, the solder thickness, and voids in the solder. This yields design rules for optimum thermal performance.     

Effect of WO3 particle size on the type and concentration of surface oxygen

1. Download : Download high-res image (65KB)
2. Download : Download full-size image

     

null

利用太阳能光解水制氢和降解有机污染物对解决能源和环境问题具有重要意义，而可见光响应催化剂的研制是实现太阳光高效利用的关键。本文从可见光响应光催化剂的设计思路出发，从电子能带结构、固溶体结构和微观复合结构三方面介绍了目前光催化剂的研究进展和发展方向。     

TiO2／Ti／TiO2半导体隔片光电化学电池的性能

研究了半导体隔片光电化学电池(SC-SEP)中光池溶液的pH、暗池溶液的氧化还原电对以及两池中的暗电极对电池的开路电压、光生电压、短路光电流和光伏安特性的影响。对它们的影响机制进行了初步分析。通过合理选择电池体系,SC-SEP的性能可比单隔室的光电化学电池(PEC)优越。