Modification of the cation exchange resin properties by impregnation in polyethyleneimine solutions: application to the separation of metallic ions

A commercial cation exchange resin Amberlite 200 has been modified after immersion in solutions of polyethyleneimine (PEI). The kinetic of fixation of the metallic ions have been determined. The modification of the surface of the resin deals with a change in the order of the affinities of the resins towards cations. The retention is the function of the formation and the stability of the complex. The conditions of modification (pH, PEI concentration and time of immersion) have been examined and the modification was confirmed by the determination of the exchange capacities, the distribution coefficient (P) and the selectivity factors (S). The obtained results revealed the effect of PEI on the exchange properties of the resin. The pH range selected (6-8) permitted a good adherence of PEI onto the resin surface. The quantity of the adsorbed PEI was increased by raising the initial concentration and the immersion period. The exchange capacity for copper ion passed from 2.6 mmol g⁻¹, in the case of unmodified resin, to 3.9 mmol g⁻¹ for the modified one.     

以交联聚乙烯醇为载体的离子交换剂对蛋白质的分离性能

本文对阴离子交换剂ＤＥＡ—ＰＶＴ常压液相离子交换色谱分离蛋白质的性能、分离条件进行了探讨。结果表明其对蛋白质的分离性能良好，容易洗脱。与载体交联聚乙烯醇相比，ＤＥＡ—ＰＶＴ对蛋白质的非特异性吸附明显降低。     

A mild, highly selective and remarkably easy procedure for deprotection of aromatic acetates using ammonium acetate as a neutral catalyst in aqueous medium

Ammonium acetate was found to catalyze efficiently the selective deprotection of aromatic acetates in the presence of various sensitive functionalities in aqueous methanol under neutral conditions at room temperature to yield the corresponding phenols in excellent yields. The method has been utilized for deprotection of acetates of several naturally occurring bioactive phenolic compounds and for preparation of venkatasin, a natural coumarino-lignan, from the anticancer compound cleomiscosin A.     

密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

PREPARATION OF MICROGEL-EPOXY RESIN TWO-PHASE POLYMERS BY IN SITU POLYMERIZATION~*

Microgel-epoxy resin two-phase polymers were prepared by in situ copolymerization of ethylenic monomers with unsaturated polyesters. The choice of monomers and the effect of monomer concentration on microgel particle size were discussed. Agglomeration of particles played a significant role in the early stage of polymerization. The microgel dispersion in epoxy resin was stable after the finish of polymerization. Upon curing the particles remained well dispersed.     

树脂法再生贮氢合金材料包覆液工艺中树脂吸附性能研究

本文研究并探讨了NK-ELN型离子交换树脂在再生贮氢合金材料包覆液过程中，温度、流速、溶液中离子浓度等条件对树脂交换容量和再生效率的影响，为树脂法再生贮氢合金材料包覆液工艺的制定，提供了一系列重要参数。     

染料配体脲醛树脂-二氧化锆复合微球的制备及对牛血清白蛋白的萃取性能

采用溶胶-凝胶法制备无孔脲醛树脂-二氧化锆复合微球,在碳酸盐缓冲溶液中,利用微球表面的酰胺键与三嗪染料-活性艳蓝X-BR分子中三嗪环上的活泼氯反应,将染料键合到微球表面,以牛血清白蛋白(BSA)为样品,考察了不同条件下,该萃取剂对BSA的萃取能力。结果表明,该萃取剂对BSA的饱和萃取量达到30.3 mg.g-1,同时萃取的蛋白易于洗脱,1.0 mol.L-1氰化钾的洗脱率达到93.5%。     

四元缔合物体系薄层树脂相分离与光度法联用测定痕量钴

提出了在酸性条件下 (pH=5.0),利用阳离子交换树脂-丁二酮肟-碘-钴四元体系,通过薄层树脂相光度法测定钴的新方法。本法灵敏度高 (e454=1.7105L/molcm),比水相光度法提高14倍,精密度理想 (测定2.0礸/ml Co(II) 6次,RSD=1.3%),选择性好。实测药品VB12及天然水中钴,线性范围0.024~2.0礸/ml (定容50ml),检出限10.4ng/ml。     

淀粉接枝丙烯酸/醋酸乙烯酯高吸水性树脂的制备

以过硫酸铵为引发剂,N,N-亚甲基双丙烯酰胺为交联剂,淀粉与丙烯酸/醋酸乙烯酯混合单体通过接枝共聚,制备了吸水及耐盐性能均较好的淀粉接枝丙烯酸/醋酸乙烯酯高吸水性树脂(CGAV)。最佳工艺条件为:淀粉10.0 g,m(混合单体)∶m(淀粉)=4∶1,w(引发剂)=0.3%,w(交联剂)=0.05%,于45℃反应2h~3 h。在最佳工艺条件下制得的CGAV吸去离子水率760 g.g-1,吸0.9%NaC l水溶液率68 g.g-1。     

弱碱性阴离子交换树脂分离1,6—二磷酸果糖的研究

采用弱碱性阴离子交换树脂HJ-30对发酵液中1，6-二磷酸果糖的分离进行了研究。详细地研究了树脂的吸附和脱附性能。实验结果表明，HJ-30树脂对FDP的吸附量达0．28gFDP／g湿树脂，以0．05mol／LNaCl洗脱光机磷和1mol／LNaCl洗脱1，6-二磷酸果糖，产品的收率和纯度分别为92％和99．4％。