Lithium ion conduction and ion-polymer interaction in poly（vinyl pyrrolidone） based electrolytes blended with different plasticizers

Poly（ethylene oxide）, poly（vinyl pyrrolidone）（PEO/PVP）, lithium perchlorate salt（Li Cl O4） and different plasticizer based, gel polymer electrolytes were prepared by the solvent casting technique. XRD results show that the crystallinity decreases with the addition of different plasticizers. Consequently, there is an enhancement in the amorphousity of the samples responsible for the process of ion transport. FTIR spectroscopy is used to characterize the structure of the polymer and confirms the complexation of plasticizer with host polymer matrix. The ionic conductivity has been calculated using the bulk impedance obtained through impedance spectroscopy. Among the various plasticizers, the ethylene carbonate（EC） based complex exhibits a maximum ionic conductivity value of the order of2.7279 10 4S cm 1. Thermal stability of the prepared electrolyte films shows that they can be used in batteries at elevated temperatures. PEO（72%）/PVP（8%）/Li Cl O4（8%）/EC（12%） has the maximum ionic conductivity value which is supported by the lowest optical band gap and lowest intensity in photoluminescence spectroscopy near 400–450 nm. Two and three dimensional topographic images of the sample having a maximum ionic conductivity show the presence of micropores.     

异烟酸氮氧化物/磷钼酸镍络合物掺杂硅胶复合物的制备及其质子导电性(英文)

制备了异烟酸氮氧化物(简计为HINO)/磷钼酸镍有机-无机络合物({[Ni(H2O)8][H(H2O)2.5](HINO)4(PMo12O40)}n;简计为1)掺杂硅胶复合物(简计为1-SG1);采用红外光谱仪和X射线衍射仪证实了合成产物的结构.结果表明,化合物1的结构特征在1-SG1硅胶复合物中得以保留.与此同时,在约98%的相对湿度下,1-SG1在温度55~100℃范围内显示良好的导电性,其质子导电率达到8.98×10-3~1.03×10-2 S·cm-1;并且,在同等条件下,1-SG1的质子导电性优于化合物1.     

基于磷钼酸和2-(2-羟基苯)苯并咪唑复合物的晶体结构和质子导电性(英文)

以磷钼酸和2-(2-羟基苯)苯并咪唑(L)为原料制备了具有质子导电性的有机-无机化合物[H3L2(PMo12O40)·7H2O·4CH3OH]n(1).单晶X射线衍射分析结果表明化合物1具有基于磷钼酸、2-(2-羟基苯)苯并咪唑及溶剂甲醇分子的二维氢键网络结构;质子导电性能测试结果表明该化合物在100℃、相对湿度为98%时的电导率达到10-4 S·cm-1.     

燃料电池用聚合物质子交换膜的研究进展

质子交换膜（PEM）是质子交换膜燃料电池的核心组件之一,具有隔绝阴阳极、提供质子传递通道和阻止燃料渗透的作用. 商业化应用的全氟磺酸PEM存在燃料渗透严重、高温条件下导电性差和成本高的问题,开发性能优良的聚合物PEM显得很有必要. 本文讨论了近年来聚合物PEM的研究进展,分别从聚合物的主链、支链和交联结构角度介绍了分子结构对薄膜相分离、质子导电性、稳定性和电池性能等性能的影响,并讨论了聚合物分子结构设计方面存在的问题,最后对燃料电池用聚合物PEM在未来的发展方向进行了展望.     

蓝青铜K0.3MoO3单晶Peierls相变研究

测量了蓝青铜K_0.3MoO₃单晶Ｒ-Ｔ曲线，发现曲线在２８０Ｋ左右有异常变化，计算得到１８０Ｋ以下的半导体能隙为１３２０Ｋ（０.１１ｅＶ）．液氮温度下测量了晶体的非线性导电性，得到电场阈值为０.1２９Ｖ／ｃｍ．样品ＤＳＣ研究表明，样品在２４０Ｋ处经历一新的Ｐｅｉｅｒｌｓ相变，且为一级相变，据此对相变的微观性质进行了定量计算．１８０Ｋ附近Δｃ_p-Ｔ曲线表明，１８０Ｋ处的相变为一个二级相变加一个一级相变 关键词：     

Determination of Thermal Conductivity of Liquids by a Multi-Point Laser Pump Method

As an advanced optical method, a multi-point pump method is presented for measurements of thermo-physical properties of liquids. Meanwhile, based on the laser-induced thermal grating method, a new theory model is presented and used to analyse the thermal effects caused by the multi-point laser pump, by which the thermal conductivity of liquids can be obtained. The results of some typical liquids, such as water, ethanol and acetone, are presented and are consistent with those of acknowledged values, demonstrating that the multi-point method is simple and useful for characterizing thermal properties of liquids.     

溶胶-凝胶法合成超细Li_(2 x)RE_xSi_(1-x)O_3及其离子导电性

用溶胶 凝胶法合成了Li2 xRExSi1 -xO3(RE =Pr ,Nd ,Sm ,Gd ;x =0～ 0 15 ) ,用DTA TG ,XRD ,TEM及交流阻抗等技术对样品的结构、形貌、粒径及离子导电性等进行了观察和测试。其固溶体形成范围是 0 导电性提高。     

翠绿亚胺聚合物高压下芳环扭角和能隙的缩减

利用改进的Ginder-Epstein模型计算了翠绿亚胺聚合物在参数V4,0取值于1.8～35.8 eV的自洽变分基态,并通过芳环扭角的变化来估算聚合物压强,给出了V4,0,芳环扭角及能隙与理论压强之间的最小二乘拟合.结果表明随此参数的增大,芳环扭角和能隙都缩减而理论压强升高.当理论压强由零压增至3.0 GPa左右时,能隙先快后慢从2.0 eV减小至最小值0.87 eV.这理论与该聚合物的高压电导测试结果一致.     

Densification and lithium ion conductivity of garnet-type Li7-xLa3Zr2-xTaxO12 （x=0.25） solid electrolytes

The garnet-type Li7La3Zr2O12 ceramic is a promising solid electrolyte for all-solid-state secondary lithium batteries. However, it faces the problem of lithium volatilization during sintering, which may cause low density and deterioration of ionic conductivity. In this work, the effects of sintering temperature and addition on the density as well as the lithium ion conductivity of Li7-xLa3Zr2-xTaxO12 (LLZTO, x=0.25) ceramics prepared by solid state reaction have been studied. It is found that optimization of the sintering temperature leads to a minor increase in the ceramic density, yielding an optimum ionic conductivity of 2.9×10-4 S·cm-1 at 25℃. Introduction of Li 3 PO 4 addition in an appropriate concentration can obviously increase the density, leading to an optimum ionic conductivity of 7.2×10-4 S·cm-1 at 25℃. This value is superior to the conductivity data in most recent reports on the LLZTO ceramics.     

MO2,M2O5和MO3氧化物对锂硼酸盐玻璃离子导电性的影响

本工作测量了45Li₂O·50B₂O₃·5M_mO_n(M=Al,Ti,Zr,P,V,Nb,Ta,Cr,Mo,W)玻璃的总电导率和电子电导率,以Raman光谱研究了玻璃结构,依据作为锂离子定域体的阴离子团的性质讨论了MO₂,M₂O₃和MO₃氧化物对玻璃离子导电性的影响。 关键词：