4,4'-双 间位联苯基苯双核铕配合物的合成与发光

合成了一个新的双核铕配合物Eu₂(bdb)₃·4H₂O 。元素分析、红外光谱、质谱证实其配位方式是三个配体同时和两个铕离子绞合配位。该配合物发出铕离子特征红光,发射峰值位于614 nm,其激发光谱的激发峰值位于370 nm。配合物的发光寿命为336 μs,寿命曲线很好地和单指数衰减拟合曲线相吻合,进一步证实配合物只有一个对称中心铕离子存在。配合物热稳定性达到230 ℃,满足制备LED器件的要求。将该配合物与370 nm 发射的InGaN芯片组合 成功地制备了红色发光二极管,当配合物和硅树脂的质量比为1 : 30时,红色发光二极管的色坐标为x=0.635 3, y=0.334 0,发光效率为 1.36 lm/W。结果表明:该配合物是制备半导体高显色指数白光LED潜在的红色有机发光材料。     

硼酸对亚微米级Ca3Sc2Si3O12:Ce绿色荧光粉的制备及发光性能的影响

采用凝胶-燃烧法合成了Ca₃Sc₂Si₃O₁₂ ∶Ce绿色LED用荧光粉,用X射线粉末衍射(XRD)、扫描电镜(SEM)、荧光光谱仪等对合成产物进行了分析和表征.结果表明:通过添加H₃BO₃做助熔剂,制得的荧光粉晶相纯正,颗粒形貌均呈现为较规则的类球形,而且所得荧光粉的粒径均小于1 μm.发射光谱呈现为一宽带,发射主峰位于505 nm,该宽峰对应于Ce³⁺关键词： 白光LED 荧光粉 3Sc₂Si₃O₁₂ ∶Ce')" href="#">Ca₃Sc₂Si₃O₁₂ ∶Ce 发光     

白光LED用Eu~(2+)离子激活含氮铝酸盐发光粉的制备

采用高温固相反应法制备Sr3Al2O6-3x/2Nx∶Eu2+发光材料。发光光谱分析表明,该材料在400~550nm可见光激发下,发射光谱为峰值波长为600 nm的宽带谱。XRD分析结果显示,Sr3Al2O6-3x/2Nx与Sr3Al2O6的晶体结构相同。研究了Eu2+离子浓度对材料发光性能的影响,结果表明随着Eu2+离子浓度的增加,材料的发光强度呈现出先增强后减弱的趋势,当Eu2+浓度为15%时,发光强度最大。根据Dexter理论,其浓度猝灭机理是电四极-电四极的相互作用。引入Ce3+作为敏化剂,样品的发光强度明显增强。     

A novel yellow emitting phosphor Dy3+, Bi3+ co-doped YVO4 potentially for white light emitting diodes

Novel Y1 x yVO4:xDy3+,yBi3+(0.01 ≤ x ≤ 0.05,0 ≤ y ≤ 0.20) phosphors for light emitting diode(LED) were successfully synthesised by solid-state reaction.The calculation results of electronic structure show that YVO4 has a direct band gap with 3 eV at G.The top of the valence band is dominated by O 2p state and the bottom of the conduction band is mainly composed of O 2p and V 3d states.An efficient yellow emission under near-ultraviolet(365 nm) excitation is observed.Compared with the pure YVO4:Dy3+ samples,the Dy3+,Bi3+ co-doped samples show a more intensive emission peak(at 574 nm) and a new broad emission band(450-770 nm),due to the 4F9/2 6H13/2 transition of Dy3+ and the emission of the VO3 4 Bi3+ complex respectively.The optimum chromaticity index of Y1 x yVO4:xDy3+,yBi3+(0.01 ≤ x ≤ 0.05,0 ≤ y ≤ 0.20) is(0.447,0.497),which indicates that YVO4:Dy3+,Bi3+ has higher colour saturation than the commercial phosphor YAG:Ce3+.The effects of concentration of Dy3+,Bi3+,electric states and the photoluminescence properties are discussed in details.     

Energy transfers between Sm and Eu in YPO4, LaP5O14 and LaP3O9 phosphates. Potential quantum cutters for red emitting phosphors

This work concerns the studies of energy transfers between Sm³⁺ and Eu³⁺ ions in some phosphates as new luminescent materials emitting in the orange-red color. The choose of ions is based on the possibility of quantum cutting process and the matrices are selected according to the 5d bands position of Sm³⁺ ion. The Sm³⁺ and Eu³⁺ doped YPO₄, LaP₅O₁₄ and LaP₃O₉ are synthesized and spectroscopic studies in ultraviolet and vacuum ultraviolet ranges have been achieved.     

共掺Mo6+离子的Ca4LaNbW4O20∶Eu3+荧光粉的发光特性

采用高温固相法制备了红色荧光粉Ca4LaNb(W1-x Mo x)4O20∶Eu3+并研究了样品的发光性质。Ca4LaNbW4O20∶Eu3+的激发光谱中包含一个宽的激发带,峰值位于275 nm,归属于WO2-4基团的电荷迁移跃迁。随着Mo6+离子的掺入,Ca4LaNbW4O20∶Eu3+位于275 nm处的吸收带变宽,其原因是O2--Eu3+的电荷迁移跃迁增强。在Ca4LaNb(W1-x Mo x)4O20∶Eu3+的发射光谱中,400~500 nm间较宽的发射带属于WO2-4基团的发射带,而位于591 nm和616 nm的尖锐的发射峰分别属于Eu3+的5D0→7F1磁偶极跃迁和5D0→7F2电偶极跃迁发射。随着Mo6+离子浓度的增加,WO2-4基团的发射带强度下降,从而提高了色纯度。     

ZnAl2O4：Tb3+荧光粉的合成、结构及其光学性能研究

通过溶胶-凝胶法制备出不同Tb³⁺掺杂浓度和不同二次煅烧温度下的ZnAl₂O₄:Tb³⁺荧光粉, 并利用X射线衍射(XRD)和荧光光谱等对样品进行了表征。由XRD结果可知,当Tb³⁺掺杂的摩尔分数不大于9%,二次煅烧温度在600℃以上时,所得粉体为结晶性良好的尖晶石相。在紫外光激发下,ZnAl₂O₄:Tb³⁺荧光粉的发射光谱由位于488 nm(⁵D₄→⁷F₆)、542 nm(⁵D₄→⁷F₅)、587 nm(⁵D₄→⁷F₄ )和621.5 nm(⁵D₄→⁷F₃)的4个发射峰组成。研究发现,Tb³⁺的掺杂浓度和二次煅烧温度对样品发光强度有着重要影响,当Tb³⁺的摩尔分数为5%,二次煅烧温度为900℃时,ZnAl₂O₄:Tb³⁺荧光粉的发光最强,继续增加Tb³⁺掺杂浓度或提高煅烧温度,分别会出现浓度猝灭和温度猝灭现象。     

白光LED用Ba3La（PO4）3∶Dy3+荧光粉的制备与发光性能

通过高温固相法合成了一系列Ba3La1-x(PO4)3∶xDy3+荧光粉材料。利用XRD测量样品的物相,结果显示样品为纯相Ba3La(PO4)3晶体。样品的激发光谱由一系列宽谱组成,峰值分别位于322,347,360,386,424,451 nm。在347 nm激发下,荧光粉在482 nm(4F9/2→6H15/2)和575 nm(4F9/2→6H13/2)处有很强的发射。研究了不同Dy3+掺杂浓度对样品发射光谱的影响,当Dy3+摩尔分数x=0.10时出现猝灭现象,浓度猝灭机理为电偶极-电偶极相互作用。确定了不同Dy3+掺杂浓度的Ba3La(PO4)3∶Dy3+的荧光寿命。Ba3La(PO4)3∶Dy3+荧光粉发射光谱的色坐标位于白光区域。     

CaMoO4：Eu3+,Bi3+,Li+红色荧光粉的共沉淀制备与表征

采用共沉淀法合成了红色荧光粉Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺及Ca_0.5MoO₄：Eu_0.25-2x³⁺, Bi_x³⁺,Li_0.25+x⁺,并采用X射线衍射(XRD)、拉曼光谱,扫描电镜(SEM)和荧光光谱(PL)测定分析了其结构形貌特征及发光性能。结果表明：制备的CaMoO₄：Eu³⁺,Bi³⁺,Li⁺红色荧光粉为白钨矿结构,颗粒尺寸约为0.5~1 μm。掺杂Bi³⁺的Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺的相对发光强度明显高于未掺Bi³⁺的Ca_0.75MoO₄：Eu_0.25³⁺荧光粉。Bi³⁺离子的掺杂将吸收来的能量传递给激活离子Eu³⁺,起到了能量传递的作用。当Bi³⁺掺杂量为x=0.005时,在395 nm激发下,主发射峰在616 nm处的相对发光强度最大,但掺杂浓度过高时会出现浓度猝灭现象。另外,电荷补偿剂的掺入能够解决材料中因同晶取代引起的电荷不平衡的问题,以Li⁺作电荷补偿剂、Eu³⁺和 Bi³⁺共掺合成的Ca_0.5MoO₄：Eu³⁺_0.23,Bi_0.01³⁺,Li⁺_0.26红色荧光粉的发光性能强于Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.5MoO₄：Eu_0.25³⁺, Li_0.25⁺及Ca_0.75MoO₄：Eu_0.24³⁺,Bi_0.01³⁺。     

Luminescence characteristics of K2Ca2(SO4)3:Eu,Tb micro- and nanocrystalline phosphor

K₂Ca₂(SO₄)₃ microcrystalline pure, doped with Eu, Tb and co-doped with Eu, Tb was prepared by solid-state diffusion method. Nanoparticles of these phosphors were also prepared by the chemical co-precipitation method. The formation of the compounds was confirmed by XRD. The particle size was calculated by broadening of the XRD peaks using Scherrer's formula. The particle size of nanocrystalline powder material was approximately found to be around 20 nm. Thermoluminescence and photoluminescence were studied to see the effect of co-doping and particle size. Tb³⁺ co-doping decreases the intensity in the Eu²⁺ doped phosphor due to the energy transfer and multiple de-excitations through various radiative and non-radiative processes. The sensitivity of K₂Ca₂(SO₄)₃:Eu,Tb microcrystalline phosphor was around 15 times more than LiF-TLD 100 and 7 times more than CaSO₄:Dy. A high temperature peak (615 K) was observed in case of the nanoparticles, which was attributed to a particle size induced phase transition. This was confirmed by differential scanning calormetry measurements. The decrease in the sensitivity in case of nanoparticles is attributed to the particle size effect i.e. volume to surface ratio. Theoretical analysis of the glow curves was done by glow curve convolution deconvolution method to calculate trapping parameters of various peaks.