Preparation and photochromic properties of pyrazolones/polyvinyl alcohol composite films

Novel photochromic composite films have been successfully fabricated by dispersing pyrazolone derivative:1,3-Diphenyl-4-(3-chlorobenzal)-5-hydroxypyrazole 4-phenylsemicarbazone (1a) into hydrosol of polyvinyl alcohol (PVA). The microstructure, photochromic behaviors and thermal bleaching properties were investigated by Raman spectroscopy, X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and ultraviolet-visible absorption spectroscopy (UV-vis). The results showed that 1a was not only blended but also well dispersed in the PVA polymer films with a suitable content of chromophore. Upon UV light irradiation, the composite films gradually changed from colorless to yellow and recovered fully to the initial state upon thermal bleaching. The time constants of photochromic reactions were almost the same as those of 1a observed in their crystalline state, indicating that the photochromic phenomenon is barely disturbed by the polymer matrix.     

Simultaneous detection of ammonia and humidity using transmission surface plasmon resonance technique

Abstract

Gas sensing by using the transmission surface plasmon resonance (T-SPR) technique was demonstrated. Polyacrylic acid (PAA)/5-nm-thick gold/40-nm-thick silver/polycarbonate grating substrate structure (Sensor A) responded to ammonia; however, it exhibited a strong humidity dependence. Polyvinyl alcohol (PVA)/5-nm-thick gold/40-nm-thick silver/polycarbonate grating substrate structure (Sensor B) as the sensing material was also prepared and it mainly responded to humidity. The T-SPR properties of Sensors A and B were observed simultaneously by a stacking arrangement that enabled us to obtain the responses by using a single spectrophotometer. The ammonia concentration under various humidity conditions could be accurately obtained by simultaneous measurement of Sensors A and B.     

“蜡烛火焰划分”实验的局限成因分析及改进研究

人教版初中化学首个探究性实验"蜡烛及其燃烧"明确指出火焰的划分方法，但在实际教学中肉眼观察法和火柴梗燃烧法对蜡烛火焰的划分存在一定的局限性。采用文献研究法和实验验证法分析其局限性的成因——燃料的析炭能力强弱、材料结构的不同等，并提出相应的改进建议。     

Hydrosilylation Reactions Catalyzed by Rhenium

Hydrosilylation is an important process, not only in the silicon industry to produce silicon polymers, but also in fine chemistry. In this review, the development of rhenium-based catalysts for the hydrosilylation of unsaturated bonds in carbonyl-, cyano-, nitro-, carboxylic acid derivatives and alkenes is summarized. Mechanisms of rhenium-catalyzed hydrosilylation are discussed.     

Late-Stage Dehydroxyazidation of Alcohols Promoted by Trifunctional Hypervalent Azido-Iodine(III) Reagents

The development of convenient new methods for the synthesis of organic azides is highly desirable. Herein, we report a practical method for dehydroxyazidation of alcohols via an S_N2 pathway involving PPh₃ and trifunctional benziodazolone-based hypervalent azido-iodine(III) reagents, which function as an electrophilic center, an azido source, and a base. This mild, chemoselective method was used for late-stage azidation of structurally complex alcohols, as well as for a new synthetic route to the antiepileptic drug rufinamide. The reaction mechanism was also investigated both experimentally and computationally.     

Assessment of nanocomposites based on unsaturated polyester resin/nanoclay under impact loading

The aim of this study is to investigate the performance of nanoclay reinforced unsaturated polyester (UP) resin under impact loads. Nanocomposite specimens containing nanoclay in 0, 1.5, and 3 (wt%) were prepared by melt mixing method. X‐ray diffraction, transmission electron microscopy analysis, scanning electron microscope photographs, and viscosity changes in liquid state resin confirmed exfoliation and intercalation of the nanoclay in the UP resin system used. Tensile modulus showed an increase with increase in nanoclay content. However, the tensile strength and elongation at break exhibited reducing performance with increase in nanoclay content. Izod impact test results indicated better performance for the specimens containing nanoclay reinforcements, with 1.5 (wt%) of nanoclay specimens showing the highest value. High velocity impact tests were carried out using gas gun in velocity range of 20–100 m/sec and harden steel hemispherical tip projectile with diameter of 8.7 mm and weight of 11.54 g. Results for high velocity impact test indicated better performance by the specimens containing nanoclay, with 1.5 (wt%) nanoclay showing the highest attained value. Damage assessments of impact area for all specimens showed spalling type brittle failure with punch out and sever fragmentation pattern. Copyright © 2011 John Wiley & Sons, Ltd.     

Chain transfer agents in cationic photopolymerization of a bis‐cycloaliphatic epoxide monomer: Kinetic and physical property effects

The effects of chain transfer agents (CTA) on cationic ring‐opening polymerization of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexane carboxylate (EEC) were explored. EEC was polymerized in the presence of various CTAs, and epoxide conversions monitored via Raman spectroscopy. Polymer films were prepared and analyzed by dynamic mechanical analysis. Many of the organic alcohols studied greatly enhanced epoxide polymerization rates and conversion levels. The gel fraction of polymer specimens decreased rapidly with increasing amounts of octanol (gel fraction >90% up to 0.3 equiv OH) but remained high with increasing amounts of 1,2‐propanediol (gel fraction >90% up to 0.6 equiv OH). Increasing the size of primary alcohols had little effect on the polymerization rates and conversions. The polymerization rate decreased with increasing alcohol substitution (1°>2°>3°). Acidic alcohols had very low impact on conversion and polymerization rates relative to the neat epoxy resin. The glass transition temperature was inversely related to the size and amount of CTA. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Comparison of Various Films Used in Biophysical Investigations as Anisotropic Matrices

Polarized spectra of biological molecules oriented in artificial systems can give useful information of structural and spectroscopical properties of these molecules^1,2. Such investigations have been carried out recently for several biological systems: chlorophylls^{3, 4, 5, 6, 7}, carotenoids⁸, biliproteins^{9, 10}, bacterial reaction centers^{11, 12}, bacteriochlorophylls¹³ etc.     

THE PECULIAR α-AMIDOALKYLATION OF VINYLTRIMETHYLSILANE

Abstract

α-Amidoalkylation of allyttrimethylsilane with methyl-2-chloro-2-(p-chlorobenzoylamino)-ethanoate 1 gave in the presence of Lewis acid racemic methyl-2- (p-chlorobenzoylamino)-4-penteno ate 2. Under the same conditions, vinlytrimethylsilane afforded (±)-trans-2-(p-chlorophenyl)-5,6-dihydro-4-methoxycarbonyl-6-trimethylsilyl-4H-1, 3-oxazine 4 as the major, by n.m.r. data and x-ray crystallography established product.     

Microwave‐Enhanced Ferrier Reaction: A Facile Synthesis of 2,3‐Unsaturated‐O‐Glycosides Under Solvent‐Free Conditions

A variety of 2,3‐unsaturated‐O‐glycosides have been prepared by the Ferrier rearrangement of acetyl protected glycals under microwave irradiation using silica gel as an acid catalyst. Environmental friendliness, high yields, and short reaction times are the key features of this method. Furthermore, the method was applicable not only to the Ferrier reaction of 3,4,6‐tri‐O‐acetyl glucal and 3,4,6‐tri‐O‐acetyl galactal but also to the Ferrier reaction of 3,4‐di‐O‐acetyl arabinal.