微乳液法合成LiFePO4 / C正极材料及其电化学性能

本文采用微乳液方法合成了纳米LiFePO₄ / C正极材料。制备样品分别用XRD和SEM进行表征，充放电测试其电化学性能。600 ℃制备样品为单一物相，平均粒径90 nm，在室温2.0～4.0 V (vs Li) 放电电压范围和15 mA·g^-1放电速率下，首次放电容量达到159 mAh·g^-1。制备样品同样展现良好的循环性能。在15 mA·g^-1速率下40次循环后，制备样品放电容量仍保持首次放电容量的98.9%。优异的电化学性能得益于样品颗粒的纳米尺寸、均匀分布以及表面碳层包覆提高了活性材料的电子电导率。     

中药材巴戟天及其水煎液微量元素的分布模式

模拟传统煎药方式,制备巴戟天水煎液。用电感耦合等离子体质谱法(ICP-MS)测定了药材及其水煎液中11种微量元素Cr、Mn、Co、Ni、Cu、Zn、As、Se、Cd、Sn、Pb含量,用火焰原子吸收光谱法(FAAS)测定了微量元素Fe含量。根据微量元素含量,得到了药材及水煎液微量元素的分布模式。结果表明,巴戟天药材样品富含人体必需元素Fe、Mn、Zn,含量分别是1086.3、393.8、15.1μg.g-1;巴戟天药材与水煎液微量元素的分布模式图清晰地显示了其微量元素的分布特征,且药材与水煎液微量元素的分布模式以及不同煎制时间下水煎液微量元素的分布模式均存在明显差异,进而表明这种微量元素分布模式对中药微量元素的研究和临床应用具有参考价值。     

Cecropin B抗菌肽接枝丝素蛋白膜的制备和表征

以体积分数为60%的乙醇处理制得不溶性再生丝素膜, 通过碳二亚胺法将Cecropin B抗菌肽共价接枝到丝素膜表面, 利用红外光谱、扫描电镜、X射线能谱和抗菌性测试等手段对制得的丝素膜结构和表面特性及其抗菌性能进行了测试分析. 结果表明, Cecropin B抗菌肽成功地接枝到了丝素膜的表面, 接枝后的丝素膜水溶性低, 并具有良好、 持久的抗菌能力.     

钯(Ⅱ)-芳香氮碱-氨基酸三元配合物中的电子效应和芳环堆积作用

用pH-电位滴定法测定了Pd(L)(Aa)⁺三元配合物及相应的二元配合物,在25±0.5℃,30%的乙醇水溶液(体积分数),I=0.1(KNO₃)条件下的稳定常数及表征常数。其中L=邻菲罗啉(phen)、苯并咪唑邻菲罗啉(PIP)、邻菲罗啉-5,6-二酮(dophen)、2,9-二甲基邻菲罗啉(dmphen)和联吡啶3,3′-二羧酸(BDA);Aa为甘氨酸(gly)、苯丙氨酸(phe)、酪氨酸(tyr)、S-苄基-半胱氨酸(bcys)、谷氨酰胺(glu)和γ-谷氨酰-α-萘胺(gnapa)。从配合物配体间的电子效应和芳环堆积等观点对配合物的附加稳定性进行了讨论,并计算了电子效应和芳环堆积效应各自对三元配合物附加稳定性的贡献。     

La2O3,Y2O3-Mo次级发射材料研究

采用粉末冶金方法制备了La2O3，Y2O3-Mo次级发射材料，测试了各种材料的次级发射系数。结果表明在钼中加入稀土氧化物可以具有很好的次级发射性能。经过激活处理后，材料的最大次级发射系数均高于2．0，达到了材料使用要求的发射水平。应用扫描电镜(SEM)和光电能谱仪(XPS)研究了稀土元素在烧结体断口和发射前后在试样表面的分布情况。分析结果表明稀土元素易于在晶界处偏聚，且发射后试样表面稀土元素的相对浓度明显高于发射前的浓度。     

Crystal Structure of Ternary Molybdate Rb5FeHf(MoO4)6 — a New Phase in the Rb2MoO4-Fe2(MoO4)3-Hf(MoO4)2 System

Physicochemical analysis (XRPA, DTA) was used to study phase equilibria in a ternary salt system Rb₂MoO₄-Fe₂(MoO₄)₃-Hf(MoO₄)₂ in the subsolidus region. Ternary molybdates with compositions 5:1:3, 5:1:2, and 1:1:1 have been found and synthesized. Crystal and thermal characteristics have been determined. Single crystals of the ternary molybdate Rb₅FeHf(MoO₄)₆ with a composition of 5:1:2 were grown. The crystal structure of the compound was solved using X-ray diffractometry (CAD-4 automatic diffractometer, MoK _α radiation, 1766 F(hkl), R = 0.0298). Hexagonal crystals with unit cell dimensions: a = b = 10.124(1) Å, c =15.135(3) Å, V = 1343.4(4) ų, Z = 2, ρ_calc = 4.008 g/cm³, space group P6₃. The mixed three-dimensional framework of the structure is formed from two sorts of MoO₄ tetrahedra and Fe and Hf octahedra linked through their common O-vertices. Rubidium atoms of three varieties occupy the large voids of the framework.Original Russian Text Copyright © 2004 by B. G. Bazarov, R. F. Klevtsova, A. D. Tsyrendorzhieva, L. A. Glinaskaya, and Zh. G. Bazarova__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 6, pp. 1038–1043, November–December, 2004.     

Mechanochemical Preparation of Water-Soluble Forms of Triterpene Acids

A waste-free technology for mechanochemical processing of fir needles into a biologically active preparation that regulates plant growth was developed. A preparation exhibiting cytokinin activity due to the presence in it of water-soluble forms of triterpene acids can be prepared using the proposed method. The effectiveness of the proposed method was confirmed by instrumental methods and biological tests.     

Electrochemical characteristics of Ce0.8Gd0.2O1.9|La0.6Sr0.4CoO3-δ + Ce0.8Gd0.2O1.9 half-cell

The analysis of the medium temperature half-cell Ce_0.8Gd_0.2O_1.9|70 wt% La_0.6Sr_0.4CoO_3- (LSCO) + 30 wt % Ce_0.8Gd_0.2O_1.9 (CGO) has been made by electrochemical impedance, cyclic voltammetry and chronoamperometry. The shape of complex impedance plots depends on temperature and cathodic polarisation of the electrode. Nyquist (Z, Z-) plots were fitted by equivalent circuit taking into account the electrolyte properties (at very high frequencies), charge transfer process at grain boundaries (at high frequencies), and medium and low frequency O₂ reduction process at the cathode surface and inside the porous cathode material. Two different time constants have been obtained for the cathode process, i.e. for electroreduction of oxygen. It was found that the addition of CGO into the cathode material (LSCO) only somewhat decreases the surface catalytic activity but the noticeably higher low-frequency resistance (i.e. mainly diffusion-like mass transfer resistance R_D) values at lower temperatures have been calculated. It was found that the mainly bulk diffusion-limited process at T773 K deviates toward the kinetically mixed process (diffusion + charge transfer) with increasing temperature.     

32Cr2MoVA合金结构钢标准物质的研制

本标准物质系合金钢。主要成份有碳、硅、锰、磷、硫、铬、镍、钼、钒,同时还含有锡、铅、砷、锑、铋等微量元素,每种元素成份都具有良好的线性关系。它可作为量值传递和仲裁分析的依据,同时也可用于校验分析仪器与分析方法的正确性和可靠性。     

Equilibrium Studies of Binary and Ternary Complexes Involving Tricine and Some Selected α-Amino Acids

Summary. The formation equilibria for the binary complexes of Co^II, Ni^II, Cu^II, Zn^II, Cd^II, Mn^II, Pb^II, Th^IV, UO₂^II, and Ce^III with tricine and for the ternary complexes involving some -amino acids (glycine, -alanine, proline, serine, asparagine, and aspartic acid) were investigated using pH-metric technique. The formation of binary and ternary complexes was inferred from the pH-metric titration curves. It was deduced that tricine acts as a primary ligand in the ternary complexes involving the monocarboxylic amino acids (glycine, -alanine, proline, serine, and asparagine), whereas it behaves as a secondary ligand in the ternary systems containing the dicarboxylic aspartic acid. The ternary complex formation was found to take place in a stepwise manner. The stability constants of the complexes formed in aqueous solutions were determined potentiometrically under the experimental conditions (t=25°C, I=0.1moldm^–3 NaNO₃). The order of stability of the ternary complexes in terms of the nature of the amino acids is investigated and discussed. The values of log K for the ternary complexes have been evaluated and discussed. Evaluation of the effects of ionic strength and temperature of the medium on the stability of the ternary system M^II-tricine--alanine (M^II=Co^II, Ni^II, and Cu^II) has been studied. The thermodynamic parameters were calculated and discussed.