HIPS／PP熔融反应共混及其动态力学性质

研究了高抗冲聚苯乙烯（HIPS）／聚丙烯（PP）共混物在过氧化二异丙苯（DCP）存在下的熔融反应过程及其动态力学性质．HIPS在DCP存在下以聚苯乙烯（PS）的降解为主，伴随着聚丁二烯（PB）的交联和接枝，PP在DCP存在下以降解为主，HIPS／PP在DCP存在下以PP同HIPS的反应接枝为主，这种原位生成的增容剂显著地改善了HIPS／PP两组份间的相容性，其分子运动特征较前两者发生明显变化，PS的Tg下降，PB和PP的Tg升高．     

聚苯乙烯二乙醇胺树脂催化合成丙酸苄酯的研究

应用聚苯乙烯二乙醇胺树脂（PSDEA）催化苄氯与丙酸的酯化反应，合成了丙 酸苄酯。研究结果表明，聚苯乙烯二乙醇胺树脂具有较高的催化活性。考察了丙酸 ／苄氯摩尔比、催化剂用量和反应时间对酯产率的影响，在典型反应条件（丙酸： 苄氯摩尔比＝1．25：1，16．7gPSDEA／摩尔苄氯，80℃浴温，反应4．0h）下，所 得丙酸苄酯的产率为95．5％，该催化剂易于回收且可重复使用、具有良好的活性 稳定性。     

支化高分子在溶液中的交叠与缠结

溶液中高分子的交叠和缠结与其链结构密切相关。支化聚苯乙烯的临界交叠浓度C和临界缠结浓度C_E比分子量相同的线型聚苯乙烯的大,说明交叠和缠结同分子在溶液中线团的体积有直接关系。     

Preparation and properties of sclerotium rolfsii invertase immobilized on indion 48-R

Crude extracellular invertase fromSclerotium rolfsii, when coupled to glutaraldehyde activated Indion 48-R, retained 70–80% activity of the soluble enzyme. Immobilization resulted in a decrease in the pH and temperature optima but it increased the temperature stability. K_m and V_max also increased as a result of immobilization. Both soluble and immobilized invertase showed inhibition at high substrate concentrations. The bound enzyme showed excellent stability to repeated use and retained approx 90% of its initial activity after 8 cycles of use.     

Thermally stimulated depolarization currents of tactic polymethyl methacrylates and their mixtures

Summary Thermally stimulated depolarization currents (TSDC) of atactic (a), syndiotactic (s) and isotactic (i) PMMA and mixtures ofs- andi-PMMA were measured. In pure tactic PMMA, TSDC peak was obtained at a temperature corresponding to the glass transition temperature of each PMMA. TSDC of mixtures isolated as precipitates from 1/1 and 1/2 (i/sweight ratio) mixed solutions showed a peak which can be attributed to the glass transition temperature of the stereocomplex. TSDC of original l/1 mixture showed two peaks which are ascribed to the glass transition temperature of residual i-PMMA and the stereocomplex. The results suggests that stereocomplex formation occurs ini/s weight ratio of 1/2 independent of the way of preparation.With 9 figures and 1 table     

Microporous hypercrosslinked polystyrene Styrosorb as a restricted access packing in sample clean-up for high performance liquid chromatography. Part I: Evaluation of restricted access properties

Summary Styrosorb is a beaded microporous polystyrene with particle sizes between 2 and 4 m. In spite of hypercrosslinkage the material was seen to swell in organic solvents. The native material is functionalized with Tris-groups at the outer surface of the particles. The average pore diameter was determined as 1.45±0.3 nm from size exclusion data using polystyrene and polyethylene standards in THF. The reversed phase behavior of the restricted access phase Styrosorb was investigated by injection of two test mixtures. Mixture I contained five aromatic amines, mixture II consisted of Amperozide^R and four related compounds. The optimum range of mobile phase composition was assessed so that analytes were separated whilst any proteins present were eluted unretained. Due to the small particle size short columns of 29×4 mm can be used for both sample clean-up and analytical separation of Amperozide^R and its metabolite.     

Quantitative Comparison Between Vacuum-Ultraviolet Irradiation and Remote Hydrogen Plasma Treatment of Hydrocarbon Polymers

The photon flux of vacuum ultraviolet (VUV) and ultraviolet (UV) radiation of a hydrogen plasma with and without a MgF₂window was recorded by fluorescence measurements of sodium salicylate layers. After the compensation of the MgF₂absorption by increasing the input power into the plasma source, a comparison between afterglow hydrogen plasma and VUV treatments was made. Polyethylene (PE), polypropylene (PP), and polystyrene (PS) were treated either with VUV radiation or with remote hydrogen plasma and mass loss and CH absorption loss were measured by a quartz crystal microbalance and by infrared reflection absorption spectroscopy, respectively. In the case of PE the effects of both treatments were found to be very similar white for PP slight differences were observed. For the actual set of experimental conditions, the radiation component is largely responsible for the efficiency of the plasma treatment. VUV and remote hydrogen plasma treatments of PS showed only a negligible loss of mass and CH absorption.     

α－甲基苯乙烯对HIPS／SBS共混物流变行为及力学性能的影响

用锥板式流变仪研究了α－ＭＳ对ＨＩＰＳ／ＳＢＳ共混物流动行为的影响，结果表明：不同α－ＭＳ用量的共混物和如曲线相似．均随增加τ＿ｗ增大、η＿ａ下降。流动指数，ｎ均小于１为非牛顿假塑性流体。加入少量（约２．５％）α－ＭＳ使共混物熔融指数提高３倍，其总体力学性能变化不大。     

Application of AM SURE™ resin to solid-phase peptide synthesis

A core-shell structure was found in AM SURE™ resin, in which most amino groups were located at the skin layer. The AM SURE™ resin revealed better synthetic efficiency, compared to the noncore-shell type resin in the synthesis of the fragment 65-74 of acyl carrier protein, the fragment 27-35 of HIV (human immunodeficiency virus) fusion inhibitor (T-20) and the Jung-Redemann 10-mer.