2，2＇－偶氮二异丁酸二甲酯的合成及其热分解反应的研究

本文研究了２，２＇－偶氮二异丁酸二甲酯的合成及其在甲苯、二甲苯中的热分解反应动力学，得到了其热分解反应速度常数与反应温度的关系式：Ｋ＿ｄ＝１．６３×１００￣（－１４）ｅｘｐ（－１２３．３ＫＪ／ＲＴ）２，２＇－偶氮二异丁酸二甲酯作为苯乙烯自由基聚合的引发剂，其单体转化率随引发剂用量的增加而增高，产物分子量则随之下降；引发剂用量在５％以上时，可得到分子量低于１０￣３的含有酯基端基的聚合物。     

重金属污染土壤植物修复的强化措施研究进展

植物修复是一种有着巨大市场潜力的治理重金属污染土壤的技术,由于影响植物修复效率的因素较多,至今实际应用还很少。针对目前植物修复技术的不足,主要从植物本身的性能、重金属的生物有效性以及农艺管理措施等三方面,综述了近年来国内外有关植物修复强化措施的研究进展,并展望了今后该领域的研究方向。     

两相催化体系中α，β－不饱和醛选择加氢反应研究Ⅲ．表面活性剂、溶剂对选择加氢反应的影响

研究了水溶性钌－膦配合物催化肉桂醛选择加氢反应中，相转移剂和表面活性剂对反应转化率和选择性的影响，考察了表面活性剂ＣＴＡＢ（十六烷基三甲溴化铵）浓度以及影响两相界面性质的因素—水相和有机相体积比、有机溶剂的改变等的影响．结果表明，相转移剂可以促进反应进行，其中以季铵盐相转移剂最好；表面活性剂能够显著地加快反应，其中以阳离子表面活性剂的效果最佳，且分子中含有长链烷基者（如ＣＴＡＢ）效果更好，非离子和阴离子表面活性剂的效果较差；对于ＣＴＡＢ，其浓度的增加导致反应速度的明显加快，但ＣＴＡＢ浓度达到１．６５×１０－２ｍｏｌ／Ｌ之后，反应体系乳化严重，反应完成后，两相分离变得困难．而增加水相体积和加入适当的有机溶剂，有利于转化率和选择性的提高．     

微量元素活性剂口服液对中老年人血液脂蛋白和脂质过氧化反应的影响

30名受试者平均年龄59．5±6．9岁．其中女性11名。每名受试者连续饮用微量元素活性剂口服液1个月。结果表明．血清总胆固醇由6．037mmol／L减少到4.867mmol／L，P＜0.01。低密度脂蛋白由4.470mmol／L减少到3．667mmol／L．P＜0．O1．甘油三脂和极低密度脂蛋白也分别降低了9．8％和10．6％；而高密度脂蛋白由0.720mmol／L增至1．003mmol／L，P＜O．O5；血浆丙二醛浓度由4．435mmol／L降至4.081mmol／L，P＜0．05：红细胞谷胱甘肽过氧化物酶和超氧化物歧化酶浓度均升高。血脂和血脂蛋白的变化表明．微量元素活性剂口服液对中老年人防治脑动脉硬化和冠心病具有良好作用。     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

Siderophore production by a marine Pseudomonas aeruginosa and its antagonistic action against phytopathogenic fungi

A marine isolate of fluorescent Pseudomonas sp. having the ability to produce the pyoverdine type of siderophores under low iron stress (up to 10 μM iron in the succinate medium) was identified as Pseudomonas aeruginosa by using BIOLOG Breathprint and siderotyping. Pyoverdine production was optimum at 0.2% (w/v) succinate, pH 6.0, in an iron-deficient medium. Studies carried out in vitro revealed that purified siderophores and Pseudomonas culture have good antifungal activity against the plant deleterious fungi, namely, Aspergillus niger, Aspergillus flavus, Aspergillus oryzae, Fusarium oxysporum, and Sclerotium rolfsii. Siderophore-based maximum inhibition was observed against A. niger. These in vitro antagonistic actions of marine Pseudomonas against phytopathogens suggest the potential of the organism to serve as a biocontrol agent.     

Kinetics of the mediatory reduction ofgem-dichlorocyclopropanes

The effect of the nature of organic electron transfer agents and of Pt^II, Pd^II, Rh^II, Co^II, Ni^II, Cu^II, Cr^III, Mn^II, Ti^III, V^III, Zn^II, and Ag^I metal ions on the kinetics of the homogeneous reduction ofgem-dichlorocyclopropanes has been studied. Pt^II, Pd^II, Rh^III, Co^II, and Ni^II ions accelerate this process, V^III and Ag^I ions exert practically no effect on the reduction rate, and the rest of the metal ions exhibit inhibitor properties.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1407–1410, August, 1993.     

Isomerisierung bei der Komplexbildung von 3-Acetyl-tetramsäure: Struktur und magnetische Eigenschaften des CuII- und NiII-Komplexes von 2,7-Bis(1′, 5′, 5′-trimethylpyrrolidin-2′, 4′-dion-3′ -yl)-3, 6-diazaocta-2, 6-dien

Isomerization at the Complexation of 3-Acetyltetramic Acid: Structure and Magnetic Properties of the Cu^II- and Ni^II-Complex of 2,7-Bis (1′, 5′, 5′ -trimethylpyrrolidin-2′,4′ -dion-3′ -yl)-3,6-diazaocta-2,6-dien 2,7-Bis(1′, 5′, 5′ -trimethylpyrrolidin-2′, 4′ -dion-3′ -yl)-3,6-diazaoctadien formes Cu^II and Ni^II complexes with different constitutions (because of the Z/E isomerization). Results of X-ray analysis of N,N′ -ethylenbis(1′, 5′, 5′ -trimethylpyrrolidin-2′, 4′ -dion-3′ -acetiminato)nickel(II) 1 respectively -copper(II) 2 shows, that the complexing agent in 1 occurs in the E-form, whereas the ligand of the Cu^II complex forms the Z-form. Magnetic susceptibility and shift effects of the ¹³C-NMR signals point to a weak paramagnetism of the Ni^II complex. ESR-spectra are obtained from 2 only. Furthermore, the Cu^II complex reduces the relaxation times T₁ and T₂ of ¹H and ¹⁷O nuclei spins from water. From the temperature dependence of the shortening of the relaxation times an activation energy is calculated which describes the reorientation of the copper complex in the “water matrix”.     

Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.     

Evaluation of a synergetic effect between Rh as permanent chemical modifier and acetylacetone as complexing agent in Sc determination in sediment slurry samples by ETAAS

In the present work, scandium was determined in sediment slurry samples (from three different rivers) by electrothermal atomic absorption spectrometry (ETAAS). Slurries were prepared by weighting 100 mg of dry sediment samples (≤53 μm particle sizes) and adding 6 ml of HCl:HNO₃:HF (3:1:2, v/v). Accurate results were only possible due to the synergetic effect between Rh as permanent chemical modifier and acetylacetone (Acac) as complexing agent. The same platform was used for 400 heating cycles. The performance of the chemical modification was evaluated by using scanning electron microscopy (SEM), synchrotron radiation X-ray fluorescence (SRXRF) and some figures of merit (precision and detectability). The best analytical conditions were attained using 1500 and 2550 °C as pyrolysis and atomization temperatures. The scandium content in the liquid phase of the slurries ranged from 61 to 73%, thus indicating, in this study, that both liquid and solid phases play an important role in slurry analyses. An amount of 5.0–20.0 μg l⁻¹ Sc linear range as well as LOD and LOQ of 0.19 and 0.62 μg l⁻¹, respectively, were obtained under these conditions. The accuracy was checked by using microwave-assisted decomposition, and the results compared to those obtained with the proposed methodology (slurry analysis). By checking both sets of the results, there is no statistical difference at the 95% confidence levels.