吸附/一级热解吸/气相色谱联用测定室内空气中的挥发性有机物

本文以高聚物TenaxTA动态吸附,一级热解吸/毛细管气相色谱法联用测定室内空气中的挥发性有机物。优化了热解吸温度和热解吸时间,建立了苯、甲苯、乙酸正丁酯、乙苯、对二甲苯、苯乙烯、邻二甲苯、正十一烷等8种典型有机污染物的外标定量曲线,各化合物线性范围为103,相关系数R为0.9983～0.9999,最低检出浓度可达2×10-4mg/m3;考察了方法的重复性、热解吸率和残留率,并分析了实际空气样品。     

Biochemical reaction engineering for redox reactions

Redox reactions are still a challenge for biochemical engineers. A personal view for the development of this field is given. Cofactor regeneration was an obstacle for quite some time. The first technical breakthrough was achieved with the system formate/formate dehydrogenase for the regeneration of NADH2. In cases where the same enzyme could be used for chiral reduction as well as for cofactor regeneration, isopropanol as a hydrogen source proved to be beneficial. The coproduct (acetone) can be removed by pervaporation. Whole-cell reductions (often yeast reductions) can also be used. By proper biochemical reaction engineering, it is possible to apply these systems in a continuous way. By cloning a formate dehydrogenase and an oxidoreductase "designer bug" can be obtained where formate is used instead of glucose as the hydrogen source. Complex sequences of redox reactions can be established by pathway engineering with a focus on gene overexpression or with a focus on establishing non-natural pathways. The success of pathway engineering can be controlled by measuring cytosolic metabolite concentrations. The optimal exploitation of such systems calls for the integrated cooperation of classical and molecular biochemical engineering.     

合成异丙苯二次失活FX-01催化剂烧炭再生研究

以工业合成异丙苯二次失活催化剂为研究对象，考察了二次失活催化剂在不同温度下再生前后酸种类及其比例、酸含量、晶相、孔结构等性能，并分析了失活催化剂结炭性质及不同温度烧炭再生情况。结果表明：温度大于４５０℃才能烧炭，５００℃可将炭烧除７８％，６００℃方可将炭烧净。５００～６００℃烧炭后催化剂酸种类及其比例可完全恢复，酸量可恢复８０～９９％，晶相、孔结构基本未改变，本征活性恢复６６～８５％。与一次轻度结炭ＦＸ０１催化剂相比，要提高烧炭温度。     

Crystal structure and characterization of the bis(n-benzyl-benzotriazole-n3)-dichloro Co(II) complex: CoCl2(C6H4N3CH2Ph)2

The structure of [CoCl₂(C₆H₄N₃CH₂Ph)₂] has been determined by X-ray crystallography. It is also characterized by elemental analysis, IR and electronic spectroscopy, and by thermogravimetric differential thermal analysis. It crystallizes in the monoclinic system, space group C2/c, with lattice parameters a = 16.133(3) , b = 11.355(2) , c = 15.637(3) , = 117.22(3)°, and Z = 8. The crystal structure of the title compound consists of monomeric molecules of [CoCl₂(C₆H₄N₃CH₂Ph)₂] with slightly distorted tetrahedron geometry for the CoCl₂N₂ chromophore. The thermal gravimetry (TG) data indicate that there are four decomposition steps with five endothermic peaks. The final product of the thermal decomposition is CoCl₂. Elemental analysis and the electronic and IR spectra are in agreement with the structural data.Original Russian Text Copyright © 2004 by F. Jian, H. Wang, and H. XiaoTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 723–728, July–August, 2004.This revised version was published online in April 2005 with a corrected cover date.     

卟啉酞菁模型化合物光致电子转移研究

本文采用时间相关单光子计数对卟啉酞菁ＴＴＰ－（ＣＨ２）ｎ－Ｐｃ模型化合物的光致电子转移进行了研究，发现激发Ｐｃ时，呈现单指数衰减，ｎ＝４时电子转移速率减小，活化能，重排能增加，电子转移效率下降，电子转移反应△ＧＣＳ与电荷分离活化络合物衰变速率ＫＣＴ，按以下规律：△Ｇ＾（５）ＣＳ〉△＾（３）ＣＳ〉△＾（４）ＣＳ〉△＾（２）ＣＳ，ｋ＾（２）ＣＳ〉ｋ＾（３）ＣＳ〉ｋ＾（４）ＣＳ〉ｋ＾（５）ｃｓ。其△Ｇ＾     

分子手性的温度效应：D-丙氨酸的变温X衍射和中子衍射研究

利用X衍射（300, 270, 250 K）和中子衍射（300, 260, 250, 240 K）研究D-氨酸单晶在静态的和动力学的变温过程中的结构特征以及考证Salam预言的由D到L构型转变的可能性. 实验发现丙氨酸晶体的空间群P212121对称性没有改变. 实验结果否定了构型相变的可能，但是发现在~250 K有一个微小的、连续的对称性破缺发生. 晶体分子振动产生的环电流模型可以用来解释D-和L-丙氨酸单晶直流磁化率和天然旋光角相反的现象， 与之相关的中子衍射数据进一步揭示了变温过程中αC－H(2), N－H(1), N－H(4), N－H(6) 键长的不同变化. 中子衍射还显示了质子移动所导致的动力学无序，来源于分子内氨基和羧基形成的氢键和分子间αC－H和氨基形成的氢键，从而产生的晶格扭曲和NH³⁺的扭转. 实验结果表明Salam预言相变不是传统意义的结构相变，而是由于温度效应导致了在相变点附近分子的宇称破缺能差（PVED）增大，然后通过氨基酸分子的隧道效应扩大了宇称破缺能差的影响，这一研究为生命现象中快速的均一手性形成提供了非线性机理的合理解释.     

Effect of N2O pretreatment on fresh and regenerated Pd-Ag/α-Al2O3 catalysts during selective hydrogenation of acetylene

N₂O pretreatment has shown to result in enhancement of the performance of fresh commercial Pd-Ag/α-Al₂O₃ catalyst during selective acetylene hydrogenation. However, it showed no effect for the used and regenerated catalysts probably due to changes int he metal arrangement on the catalyst surface after regeneration.     

Molecular Basis of the Dynamic Strength of the Sialyl Lewis X—Selectin Interaction

The selectins are Ca²⁺‐dependent cell adhesion molecules that facilitate the initial attachment of leukocytes to the vascular endothelium by binding to a carbohydrate moiety as exemplified by the tetrasaccharide, sialyl Lewis X (sLeX). An important property of the selectin‐sLeX interaction is its ability to withstand the hydrodynamic force of the blood flow. Herein, we used single‐molecule dynamic force spectroscopy (DFS) to identify the molecular determinants within sLeX that give rise to the dynamic properties of the selectin/sLeX interaction. Our atomic force microscopy (AFM) measurements revealed that the unbinding of the selectin/sLeX complexes involves overcoming at least two activation barriers. The inner barrier, which determines the dynamic response of the complex at high forces, is governed by the interaction between the Fuc residue of sLeX and a Ca²⁺ ion chelated to the lectin domain of the selectin molecule, whereas the outer activation barrier can be attributed to interactions involving the sialic acid residue of sLeX. Due to their steep inner activation barriers, the selectin‐sLeX complexes are less sensitive to high pulling forces. Hence, besides its contribution to the bond energy, the Ca²⁺ ion also grants the selectin–sLeX complexes a tensile strength that is crucial for the selectin‐mediated rolling of leukocytes.     

Photophysical aspects of single-molecule detection by two-photon excitation with consideration of sequential pulsed illumination.

An important goal in single molecule fluorescence correlation spectroscopy is the theoretical simulation of the fluorescence signal stemming from individual molecules and its autocorrelation function. The simulation approaches developed up to now are based exclusively on continuous-wave (cw) illumination and consequently on cw-excitation. However, this approximation is no longer valid in the case of two-photon excitation, for which pulsed illumination is usually employed. We present a novel theoretical model for the simulation of the fluorescence signal of single molecules and its autocorrelation function with consideration of the time dependence of the excitation flux and thus of all illumination-dependent photoprocesses: two-photon excitation, induced emission and photobleaching. Further important characteristics of our approach are the consideration of the dependence of the photobleaching rate on illumination and the low intersystem-crossing rates of the studied coumarins. Moreover, using our approach, we can predict quantitatively the effect of the laser pulse width on the fluorescence signal of a molecule, that is, the contributions of the photobleaching and saturation effects, and thus we can calculate the optimal laser pulse width. The theoretical autocorrelation functions were fitted to the experimental data, and we could ascertain a good agreement between the resulting and the expected parameters. The most important parameter is the photobleaching constant sigma, the cross section of the transition Sn<--S1, which characterises the photostability of the molecules independent of the experimental conditions. Its value is 1.7 x 10(-23) cm2 for coumarin 153 and 5 x 10(-23) cm2 for coumarin 314.