The interactions of (=O→Si)-(benzoyloxymethyl)trifluoro-and -(benzoyloxymethyl) methyldifluorosilanes with a solvent

The IR spectra of solutions of (=OSi)-(benzoyloxymethyl)trifluorosilane (1),-(benzoyloxymethyl)methyldifluorosilane (2), and butyl benzoate (3) are examined in the region of thev(C=O) stretching vibrations in 24 solvents. The ability of compounds1—3 to undergo specific intermolecular interactions is evaluated from the dependence ofv(C=O) on the Kamlet-Taft (^*,, ) parameters, which was obtained for the carbonyl groups involved in the intramolecular coordinate (=OSi) bond and for free carbonyl groups. The corresponding values of the coefficients in the Kamlet-Taft equations are indicative of a weak ability of pentacoordinate silicon compounds1 and2 to undergo acid-base interactions.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 689–692, April, 1995.     

p—Si上电沉积Ni—W—P薄膜的结构与热稳定性

研究了ｐ－Ｓｉ上恒电流沉积Ｎｉ－Ｗ－Ｐ合金薄膜组成与结构的关系，讨论了镀层的组成、结构随沉积时间的变化．测定了非晶合金的晶体结构随热处理温度的改变以及ＤＴＡ曲线，结果表明，非晶Ｎｉ－Ｗ－Ｐ合金在晶化过程中形成两个纳米超微晶相，非晶Ｎｉ－Ｗ－Ｐ薄膜的热稳定性远高于通常使用的非晶Ｎｉ－Ｐ薄膜．     

Structural evolution of calcium-exchanged (NH4)2SiF6-dealuminated Y zeolite after various chemical treatments

The structural evolution of Y zeolite (Si/Al 2.17) weakly dealuminated by hexafluorosilicate (Si/Al 3.13), denoted Y_D, and exchanged with calcium (CaY_D), has been studied after acid–base treatments at 80 °C close to the cation exchange conditions. The stability of the samples was followed by X-ray diffraction and solid-state NMR of ²⁹Si and ²⁷Al; Y_D zeolite was completely destroyed by treatment with acid pH 2.5 and suffered serious degradation on treatment with alkali at pH 11.8. The introduction of calcium improved the stability of the zeolite in acid and base. In acid CaY_D was not destroyed until pH 1. At pH 2, silicon and aluminium were extracted and an amorphous phase was formed. Base treatment at pH 13 did not affect the calcium-exchanged zeolite.     

Structural materials: metal-silicon-Boron. The Nb-rich corner of the Nb-Si-B system

Phase equilibria in the Nb-Nb₅Si₃-NbB region were studied in the melting (crystallization) range by means of light microscopy, XRD, SEM and EMPA on alloys after arc-melting and annealing at 1800°C and at subsolidus temperatures. Phase transition and melting temperatures were determined by DTA and pyrometric Pirani-Alterthum technique resulting in a solidus projection and two isopleths, Nb₇₇Si₂₃-Nb₇₇B₂₃ and Nb₉₉Si₁-Nb₅Si₂B. The T₂-phase Nb₅Si_3−xB_x (0?x?2, Cr₅B₃-type) was found to form equilibria with (Nb), NbB, Nb₃Si, and with the T₁-phase (Mn₅Si₃ derivative type). The T₂-phase melts incongruently (Nb₅Si_1.8B_1.2 at 2245°C) and forms a quasibinary eutectic with the niobium solid solution on a minimum tie-line at ∼1880°C.     

XRD-Studies of SiC/Si layers on carbon substrates

Structural investigations of thin films of SiC, SiC with free silicon and various titanium suicides (TiSi₂, TiSi and Ti₅Si₃) are described. The crystal phases have been identified using X-ray diffractometry. The growth of reaction products from surface reactions between silicon and deposited titanium can be observed.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

A Simple Hydrothermal Route to Large‐Scale Synthesis of Uniform Silver Nanowires

This paper describes the preparation of uniform silver nanowires by reducing freshly prepared silver chloride with glucose at 180 °C for 18 hours in the absence of any surfactants or polymers. Scanning electron microscopy studies indicated that the silver nanowires are about 100 nm in diameter and up to 500 μm in length. High‐resolution transmission electron microscopy analyses showed that the silver nanowires grow perpendicularly to the Ag(200) plane. The silver nanowires are believed to grow through a solid–solution–solid process. Some influential factors on the growth of silver nanowires are also discussed.     

Polymeric organosilicon systems. XVII. Synthesis and photochemical and conducting properties of poly[o-and m-(disilanylene)phenylene]s

Poly[o-(tetramethyldisilanylene)phenylene] ( 2a ), poly[o-(1,2-dimethyldiphenyldisilanylene)-phenylene] ( 2b ), poly[m-(tetramethyldisilanylene)phenylene] ( 2c ), and poly[m-(1,2-dimethyldiphenyldisilanylene)phenylene] ( 2d ) were prepared by the sodium condensation reaction of the corresponding 1,2-and 1,3-bis (chlorosilyl)benzenes in toluene. Irradiation of thin films of 2a-2d in air resulted in a rapid decrease of absorption maxima in the ultraviolet region. The photolysis of 2b and 2d in benzene afforded photodegradation products with low molecular weights. When thin films of 2b and 2d were doped with antimony pentafluoride vapor, films which have conductivities of semi-conductor level were obtained. © 1993 John Wiley & Sons, Inc.     

La0.8Ca0.2MnO3纳米线的制备及表征

利用Sol-gel法结合氧化铝模板技术制备了La0.8Ca0.2MnO3纳米线, 并研究了两种热处理方法对 La0.8Ca0.2MnO3纳米线结构和形貌的影响. 快速升温到800 ℃得到的La0.8Ca0.2MnO3纳米线较粗, 其直径大于氧化铝模板的孔径, 而经过缓慢升温到400 ℃预处理再升温到800 ℃得到的La0.8Ca0.2MnO3纳米线, 其直径和氧化铝模板的孔径相当, 都约为35 nm. X射线衍射和透射电镜分析结果表明, 两种方法得到的 La0.8Ca0.2MnO3纳米线都是具有钙钛矿结构的属于单斜晶系的多晶材料.     

A novel chemical route to SiO2 nanowires

A white substance was got by directly heating TiSi powder on Ti foil, under Ar+O ₂ atmosphere. ED, EDX, SEM and HRTEM studies reveal that the white substance consists of amorphous SiO ₂ nanowires of smooth surface and uniform diameter (40-90 nm). X-ray-induced luminescent emission experiment shows that two broad peaks are at 430 and 570 nm. A one-dimensional growth mechanism, on the basis of the one-dimensional thermal flow during nanowire formation, is discussed.