Trends in Preconcentration Procedures for Metal Determination Using Atomic Spectrometry Techniques

 Methods for metal preconcentration are often described in the literature. However, purposes are often different, depending on whether the methods are applied in environmental, clinical or technological fields. The respective method needs to be efficient, give high sensitivity, and ideally also is selective which is useful when used in combination with atomic spectroscopy. This review presents the actual tendencies in metal preconcentration using techniques such as Flame Atomic Absorption Spectrometry (FAAS), Electrothermal Atomic Absorption Spectrometry (ETAAS), Hydride Generation Atomic Absorption Spectrometry (HGAAS), Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Procedures based on related to electrochemical, coprecipitation/precipitation, liquid–liquid and solid–liquid extraction and atom trapping mechanisms are presented. Correspondence: Department of Analytical Chemistry, Universidade Estadual de Campinas – UNICAMP, P.O. Box 6154, 13083-970 Campinas, Brazil. e-mail: zezzi@iqm.unicamp.br Received December 20, 2001; accepted October 11, 2002     

Direct determination of manganese in vitamin-mineral tablets using solid sampling electrothermal atomic absorption spectrometry

Manganese in vitamin-minerals tablets was determined by solid sampling electrothermal atomic absorption spectrometry (SS-ETAAS) using three different calibration methods, namely calibration against aqueous standards, standard addition with aqueous standards on solid samples and calibration against solid certified standards. Samples were only finely ground and introduced directly into the furnace by means of solid autosampler system without any dissolving process. Effects of different calibration techniques, temperatures and heating rates of atomization and pyrolysis steps on the accuracy and precision of the analyte elements were investigated. After optimization of the experimental parameters, there is good agreement (at 95% confidence level) between the results obtained by solid sampling and those obtained by acid digestion of samples.     

排序集抽样下Inverse Rayleigh分布的Fisher信息量及其在参数估计中的应用

文章分别在简单随机抽样和排序集抽样下研究了Inverse Rayleigh分布中对应样本所含刻度参数θ的Fisher信息量.数值结果表示,同等样本容量的排序集样本比简单随机样本提供更多关于θ的信息.接着分别基于简单随机样本和排序集样本构造了θ的一些优良估计,并对估计结果进行了数值比较.     

Simultaneous distillation-extraction and dynamic headspace methods in the gas chromatographic analysis of Parmesan cheese volatiles

Summary Dynamic headspace and simultaneous steam distillation-extraction techniques were used to isolate volatile components of Parmesan cheese. Identification of the substances was carried out by GC and GC-MS; 110 compounds were identified in the samples obtained using the headspace technique, 105 in the extracts; among them, about 50 compounds were isolated with both procedures. Mass spectral data showed evidence for a number of newly reported compounds such as 3-(methylthio)propanal, -tetradecalactone, 9-tetra-decenoic and 9-hexadecenoic acids. Mass spectra of some compounds are discussed and a comparison between the results obtained with the two sampling methods is given.     

Electron microprobe analysis of micro amount powder samples: A case study on high purity coal

For the major, minor and trace element analysis of the inorganic compounds of a Ruhr-Saar coal different preparation techniques are investigated with X-ray fluorescence analysis, electron microprobe and classical wet chemical methods minimizing sample weight at standard preparation times and analytical accuracies. Considering accuracy as well as preparation efforts, determinations by electron microprobe on small sample amounts (<50 mg) proved to be superior to the other methods.Abbreviations AAS atomic absorbtion spectrometry - EMA electron microprobe analysis - IC ion chromatography - ISE ion sensitive electrode - PHOT photometry - WCA wet chemical analysis - XRF X-ray fluorescence analysis - LTA low temperature plasma ashing - HTA high temperature ashing - l.o.i. loss on ignition     

Coupling of thermal desorption in modified closeable sampling columns with wide-bore capillary gas chromatography and mass spectrometric detection

In contrast to usability of Curie-point pyrolysis at 700°C directly attached to gas chromatography-mass spectrometry (GC-MS) for determination of organic wood preservatives in waste wood samples the investigation method reported here consists of thermal desorption at temperatures about 260°C in connection with GC-MS for peak identification or GC with flame ionization detection for quantitative analyses. So-called “modified closeable sampling columns” are used as batch-reactor in thermal desorption experiments. Desorbed vapours can be introduced on capillary columns without sample discrimination and without a disturbing lost of resolution. In this manner a lot of individual polycyclic aromatic hydrocarbons were determinated in waste wood samples, especially in railway sleepers.     

Determination of rare earth elements in seawater by on-line column preconcentration inductively coupled plasma mass spectrometry

A home made column of commercially available iminodiacetate resin, Muromac A-1 (50–100 mesh) was used to concentrate rare earth elements (REEs) (15 elements: Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) in seawater. An automated low pressure flow analysis method with on-line column preconcentration/inductively coupled plasma mass spectrometry (ICP-MS) is described for the determination of REEs in seawater. Sample solutions (adjusted to pH of 3.0) passed through the column. After washing the column with water, the adsorbed elements were subsequently eluted into the plasma with 0.7 M nitric acid. Calibration curves were accomplished by means of purified artificial seawater with a sample loading time of 120 s. Detection limits (DLs) of the on-line column preconcentration/ICP-MS by eight replicate operations were between 0.040 and 0.251 pg ml⁻¹ for REEs in the artificial seawater. The precision was less than 8.9% for REEs and one sample can be processed in 7 min using a 7 ml of sample. The proposed method was applied to determine REEs in coastal seawater of Hiroshima Bay, Japan.     

New In-situ Sampling and Analysis of the Production of CeO<Subscript>2</Subscript> Powders from Liquid Precursors using a Novel Wet Collection System in a rf Inductively Coupled Thermal Plasma Reactor. Part 1: Reactor System and Sampling Probe

A new reactor and a novel in-situ sampling technique were developed for the study of the synthesis of CeO₂ powders produced from dissolved cerium nitrate salts. The conical reactor minimized particle recirculation and provided a highly symmetrical and undisturbed plasma flow suitable for the analysis of the phenomena affecting the formation of CeO₂ powders. Both a calorimetric study of the reactor and a thermodynamic analysis of CeO₂ formation were conducted. The sampling probe is described and near-isokinetic sampling was achieved. The sampled particles were collected using a miniature wet collection system, i.e. a mist atomizer and a custom-made spray chamber. A numerical simulation of the velocity and temperature fields of the plasma gas in the reactor was done using Fluent. A comprehensive droplet-to-particle formation mechanism presented elsewhere is revisited and expanded based on calorimetry, thermodynamics of CeO₂ formation, numerical simulations and collected particles. No traces of other oxidation states other than CeO₂ were found.     

用环形扩散管和滤纸联用采样技术采集空气中氨和铵盐

建立了环形扩散管和滤纸采样夹联用，分形态同时采集空气中所态氨和颗粒态铵盐的方法。在同一气流中，采用涂渍１．５％草酸乙醇水溶液的环形扩散管采集气态氨，用浸渍上述试剂的玻璃纤维纸和慢速定量滤纸分别采集颗粒安和第一层滤纸上的铵盐挥发产生的氨气。用靛酚蓝比色法分别测定氨和铵盐。当采气流速为１．０Ｌ／ｍｉｎ时，采样效率高于９８．２％。将本法测得的氨气和铵盐的总量与标准采样方法的测定结果比较。无显著性差异（Ｐ     

Thermodynamical approach to the traveling salesman problem: An efficient simulation algorithm

We present a Monte Carlo algorithm to find approximate solutions of the traveling salesman problem. The algorithm generates randomly the permutations of the stations of the traveling salesman trip, with probability depending on the length of the corresponding route. Reasoning by analogy with statistical thermodynamics, we use the probability given by the Boltzmann-Gibbs distribution. Surprisingly enough, using this simple algorithm, one can get very close to the optimal solution of the problem or even find the true optimum. We demonstrate this on several examples.We conjecture that the analogy with thermodynamics can offer a new insight into optimization problems and can suggest efficient algorithms for solving them.The author acknowledges stimulating discussions with J. Piút concerning the main ideas of the present paper. The author is also indebted to P. Brunovský, J. erný, M. Hamala, . Peko, . Znám, and R. Zajac for useful comments.