负动量压缩因子的环形对撞机磁聚焦结构的研究

探讨了设计负动量压缩因子(α_p<0)的正负电子对撞机储存环磁聚焦结构的可行性及方法.作为应用实例,说明了设计α_p<0的τ–粲工厂磁聚焦结构的可能性.     

层次分析中广义最小偏差法的性质

广义最小偏差法（GLDM）是层次分析中一种重要的排序方法．本文讨论了广义最小偏差法的性质和灵敏度分析问题．     

一种改进的计算探测器校正因子的相关抽样方法

对于小尺寸探测器处于大块介质的情形, 在探测器的校正因子的Monte Carlo模拟中, 存在两个难题: 一是由于探测器尺寸很小粒子难以到达探测器并发生碰撞; 二是两个随机变量比值难以达到要求精度. 本文使用经过改进的粒子碰撞自动重要抽样方法, 再结合相关抽样方法, 解决了这两个难题, 并在MCNP-4C程序平台上加以实现. 除了粒子碰撞自动重要抽样以外, 还选用了其他3种方法: 直接模拟、区域分裂、强迫碰撞+Dxtran球分别与相关抽样方法结合, 对一个简化的探测器校正因子计算模型进行了计算. 实际计算结果表明, 相关抽样方法无论与哪种方法结合, 都起到了提高相关量计算效率的作用; 而它与粒子碰撞自动重要抽样结合, 比其他方法具有明显的优越性.     

静电火花法表征塑料导爆管起爆感度探索

提出了塑料导爆管轴向静电火花感度的概念、测试原理。用标准的静电感度测试仪配以一定结构的起爆针 ,建立了可用于导爆管感度测试的实验装置 ,采用升降法测出导爆管起爆所需静电能量并用它来表征导爆管的感度。用三种导爆管进行了感度测试 ,实验条件下其感度值E0 .50 分别为 0 .4 3、1.0 8、1.94J。     

中学生男性性别角色期望的因子模型与应用

运用中学生男性性别角色期望调查表和因子分析方法对贵阳市中学生进行男性性别角色期望调查和定性与定量分析,为中学生树立适宜的性别角色观,促进其心理健康发展提供量化依据.分析显示:传统的男性角色并不被现代中学生完全接受,无论是男中学生还是女中学生都在力图探求一种新的男性性别角色模式,且两性中学生对这一新的男性性别角色模式的期望和把握是有一定差异的.     

拟因子试验设计在生产中的应用

根据生产实际,综合利用并列、赋闲列和拟水平试验设计,运用多重比较进行方差分析,寻找水泥熟料的最佳工艺.不仅解决了不同水平多因素试验问题,同时还可考虑交互作用,大大减少了试验次数,从而提高经济效益.     

A Characterization of Graphs without Even Factors

In this paper, we first reduce the problem of finding a minimum parity (g,f)-factor of a graph G into the problem of finding a minimum perfect matching in a weighted simple graph G*. Using the structure of G*, a necessary and sufficient condition for the existence of an even factor is derived. This paper was accomplished while the second author was visiting the Center for Combinatorics, Nankai University. The research is supported by NSFC     

关于微分熵的一类强偏差定理

利用关于乘积分布密度的相对熵和相对熵率的概念,建立了相依连续型随机变量序列关于参考微分熵的一类强偏差定理,证明中给出了将Laplace变换应用于微分熵强偏差定理的研究的一种途径．     

Shape sensitivity of a plane crack front

The 3D‐elasticity model of a solid with a plane crack under the stress‐free boundary conditions at the crack is considered. We investigate variations of a solution and of energy functionals with respect to perturbations of the crack front in the plane. The corresponding expansions at least up to the second‐order terms are obtained. The strong derivatives of the solution are constructed as an iterative solution of the same elasticity problem with specified right‐hand sides. Using the expansion of the potential and surface energy, we consider an approximate quadratic form for local shape optimization of the crack front defined by the Griffith criterion. To specify its properties, a procedure of discrete optimization is proposed, which reduces to a matrix variational inequality. At least for a small load we prove its solvability and find a quasi‐static model of the crack growth depending on the loading parameter. Copyright © 2003 John Wiley & Sons, Ltd.     

Does the beam width affect the generalized M factor of hard-edged diffracted beams?

A detailed study of the generalized M² factor of hard-edged diffracted beams based on the truncated second-order moments method, asymptotic analysis and self-convergent beam width approach is performed. The dependence of the generalized M² factor on the parameters characterizing the spatial profile, and beam truncation, etc. is analyzed.