Effect of N2O pretreatment on fresh and regenerated Pd-Ag/α-Al2O3 catalysts during selective hydrogenation of acetylene

N₂O pretreatment has shown to result in enhancement of the performance of fresh commercial Pd-Ag/α-Al₂O₃ catalyst during selective acetylene hydrogenation. However, it showed no effect for the used and regenerated catalysts probably due to changes int he metal arrangement on the catalyst surface after regeneration.     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

DIRECT SOMATIC EMBRYOGENESIS AND PLANT REGENERATION FROM PROTOPLAST-DERIVED CELLS OF WHEAT (Triticum aestivum L.)

Protoplasts were isolated from embryogenic calli derived from immature embryos ofwheat (Triticum aestivum L. cv. Jinan 177). The protoplasts were cultured in NMB mediumsupplemented with 1mg/L 2,4- D and 500mg/l casein hydrolysate (CH). The regenerated cellsfrom protoplasts divided to form somatic embryos directly. The somatic embryos grown to1.5- 2 mm in size directly developed into complete plants on solid MB medium without hor-mones.     

Model-free kinetics applied to regeneration of coked alumina

Thermogravimetry is proposed to study the alumina catalyst regeneration deactivated by coke, after being used in the transformation of styrene in a fixed bed continuous flow reactor. The model-free kinetic approach has been applied to data for the thermal oxidation of carbonaceous deposits on the catalyst. The activation energy (E) was calculated as a function of a (conversion) and T (temperature), by using Vyazovkin model-free kinetic method, allowing to estimate time required to remove coke at a given temperature. This revised version was published online in August 2006 with corrections to the Cover Date.     

FT-IR study of coked HY zeolite regeneration using oxygen or ozone

Two zeolites were coked using cyclohexene at 620 K; one had a low Si/Al_f ratio (HY), the other was ultrastabilized (HYS). It was found that oxygen regeneration occurred at 770 K or above, whereas ozone was effective at 450 K or less,e.g. under conditions such that the HY sample was still thermally stable.     

Dehydrogenation of ethylbenzene with CO2 over Cr-MCM-41 catalyst

M-MCM-41 catalysts (M: V, Cr, Fe, and Ga) prepared by direct hydrothermal synthesis (DHT) have been tested for dehydrogenation of ethylbenzene with CO₂. The synthesized materials were characterized by X-ray diffraction (XRD), N₂ adsorption (77 K), and diffuse reflectance UV–vis spectroscopic measurements. Cr-MCM-41 showed the highest activity among M-MCM-41 catalysts tested, resulting in the production of styrene with the conversion of 65% and the selectivity above 90%. The rate of styrene formation increased with increasing Cr loading up to 1.7 wt.%. It is suggested that Cr(VI)O₄ in tetrahedral coordination is formed as an active monochromate species and reduced to Cr(III)O₆ in octahedral coordination as a less active polychromate species during the reaction. Deactivated catalyst was regenerated by a treatment with gaseous oxygen or CO₂, during which redistribution as well as reoxidation of polymeric Cr(III)O₆ octahedra to monomeric Cr(VI)O₄ tetrahedra was observed. The rate of CO formation increased together with that of styrene formation, while the rate of H₂ formation decreased, with increasing partial pressure of CO₂. It was confirmed that reverse water-gas shift reaction took place over Cr-MCM-41 by a separate experiment. The rate of CO formation during the dehydrogenation of ethylbenzene with CO₂ over Cr-MCM-41 was well accounted for by assuming parallel occurrence of two reactions, i.e., direct oxidative dehydrogenation of ethylbenzene with CO₂ and simple dehydrogenation of ethylbenzene thermodynamically assisted by reverse water-gas shift reaction.     

Comparative Studies on the Deactivation and Regeneration of TiO2 Nanoparticles in Three Photocatalytic Oxidation Systems: C7H16, SO2, and C7H16-SO2

Three photocatalytic oxidation (PCO) systems: C₇H₁₆-O₂, SO₂-O₂ and C₇H₁₆-SO₂-O₂ were carried out with the aid of UV-illuminated TiO₂ nanoparticles at room temperature in a batch reactor. In C₇H₁₆-O₂-TiO₂ system, no catalyst deactivation was observed, while for SO₂-O₂-TiO₂ and C₇H₁₆-SO₂-O₂-TiO₂ systems, the photocatalytic activity of used TiO₂ powder showed decreasing and eventually no activity after used consecutively. The reaction products such as sulfur trioxide or sulfuric acid adsorbed onto the surface of TiO₂ catalyst were poisoning species. Photocatalytic activity of the deactivated TiO₂ powder could be regenerated by sonicating treatment with water and methanol for the two systems, respectively.     

Deactivation and regeneration of the B2O3/TiO2-ZrO2 catalyst in the vapor phase Beckmann rearrangement of cyclohexanone oxime

The deactivation and regeneration of B₂O₃/TiO₂-ZrO₂ catalyst for the vapor phase Beckmann rearrangement of cyclohexanone oxime to -caprolactam were studied. The fresh, deactivated and regenerated catalysts were characterized by using adsorption of nitrogen, X-ray diffraction (XRD), thermogravimetry (TG) and NH₃-temperature-programmed desorption (NH₃-TPD) techniques. The crystal structure and pore size distribution of the catalyst were retained after reaction, but the number of acid sites decreased significantly. There was a relationship between the amount of coke deposited on the catalyst and the decline in catalytic activity. These results suggest that the coke deposition on the surface of catalyst is mainly responsible for the catalyst deactivation. The catalytic activity can be recovered completely after calcining the deactivated catalyst in air flow at 600 °C for 8 h.     

Superbeads: immobilization in "sweet" chemistry

Enzymatic oligosaccharide synthesis using recombinant glycosyltransferases is able to overcome the difficulties associated with chemical methods. Nonetheless, sugar nucleotide regeneration cycles are necessary for the glycosylation. The multistep enzyme reaction can be efficiently carried out on superbeads that are prepared by immobilizing multienzyme mixtures on bead support through fused binding domains.     

Ni/SiO2催化剂上甲烷催化裂解制氢

研究了固定床反应器上甲烷在Ni/SiO2催化剂上的裂解反应，并分别用O2、H2O进行催化剂失活/活化循环实验，并对催化剂用XRD进行分析。结果表明,Ni/SiO2催化剂具有良好的催化性能,甲烷转化率～40%，并能在150 min的时间内保持其活性，无论是用空气氧化还是水蒸气汽化，都能有效地活化已失活的催化剂。XRD实验显示，多次裂解－再生循环过程，对催化剂结构没有明显破坏。