甘氨酸母液脱色活性炭的微波法再生研究

脱色甘氨酸母液的废活性炭,是一类吸附有有机胺类聚合物且难以再生的危险固体废弃物。本文探索性地开展了微波法再生脱色甘氨酸母液废活性炭的研究,考察了活性炭在微波炉中的放置方式、含水率以及微波反应条件等对活性炭再生率和炭损率的影响,分别采用红外光谱法、BET法对活性炭进行了分析表征。实验结果表明,在功率640 W、反应时间8 min的条件下,废活性炭的再生率达99%、综合再生率达59.0%,对再生活性碳进行红外光谱分析表明,在微波功率大于480 W后,微波辐射能有效去除废活性炭中的有机物;在微波功率800W条件下,再生活性炭的BET比表面积由废活性炭的128.15 m2/g提高到1398.5437 m2/g,已达到新鲜活性炭的性能。     

Dawson磷钼钒酸的合成、脱硫与微波辅助空气再生

采用乙醚萃取法制备了Dawson结构磷钼钒酸H6+n[P2Mo18-nVnO62](n=1～4),考察了不同钒原子取代数目、吸收温度、H2S气体浓度、杂多酸吸收剂浓度等条件下,4种杂多酸水溶液对H2S的吸收效率,发现其中H7[P2Mo17VO62]吸收剂具有最佳脱硫性能。采用微波辅助空气再生的方法对脱硫后的H7[P2Mo17VO62]吸收剂强化再生,通过红外、X射线能谱着重对吸收前、微波再生前后的H7[P2Mo17VO62]吸收剂进行了表征,并通过测定氧化还原电位、化学需氧量(COD)分析了再生前后吸收剂的氧化还原情况,结果表明,H2S还原V(Ⅴ)之后又进一步还原了Mo(Ⅵ),微波能够活化氧气从而促进脱硫后吸收剂的再生,是优于单纯空气再生的一种新的再生方法。     

Unusual Regenerable Porous Metal–Organic Framework Based on a New Triple Helical Molecular Necklace for Separating Organosulfur Compounds

Desulfurization of fuels is receiving more and more attention all over the world due to the increase of stringent environmental regulations and fuel specifications. The metal–organic framework (MOF) is a new class of crystalline materials, and high porosity, one of the most important properties of MOFs, plays a central role in the functional properties. However, the investigation of MOFs, being employed as sorbents for adsorptive desulfurization, is still scarce. In this regard, we have constructed a new 3D porous compound 1 by using rigidly designed carboxylate ligands, which, for the first time, exhibit an unusual triple molecular necklace‐like helix. The N₂ sorption isotherms of 1 show that it has a large Brunauer–Emmett–Teller (BET) surface area and pore volume. With the stable pore structure and appropriate pore sizes, compound 1 has been used as a sorbent for adsorptive desulfurization. The results indicate that compound 1 shows an excellent adsorption property and, more importantly, displays excellent stability, repeatability, and regenerability. Thus, the design and synthesis of targeted MOFs with appropriate pore size and increased interactions between organosulfur compounds and ligands/metals from MOFs is crucial for adsorptive desulfurization, which might be an effective guide to find an efficient and green adsorbent for desulfurization.     

Electrochemical Quantification of Mercury in Solutions Using Boron-doped Diamond Electrodes: Electrode Regeneration and Role of Gold and Impurities

Abstract

For determining Hg in solutions in the ppb to ppt range using boron-doped diamond (BDD) electrochemistry, the role of an added gold solution for enhanced sensitivity is investigated. Using differential pulse anodic stripping voltammetry (DPASV), peaks due to Cu and Ag as impurities from gold are identified. With the proper choice of the potential for deposition, effects of the impurities are minimized and an electrode regeneration procedure is devised and tested, resulting in reproducible slopes of the calibration curves in successive runs. The location and shift of the DPASV peak potentials with concentration are explained with the use of the Nernst equation.     

Prototypical Nonelectrochemical Method for Surface Regeneration of an Integrated Electrode in a PDMS Microfluidic Chip

Abstract

A prototypical method for surface regeneration of an integrated electrode in a microfluidic chip is demonstrated. A platinum wire as working electrode was mounted in a polydimethylsiloxane chip vertical to the chip through the channel. The regeneration of the electrode was easily achieved by drawing the platinum wire out for 5 mm, because the area exposed to the channel or the stream would be altered. With continuous motion, the wire electrode can maintain a fresh surface just like a dropping mercury electrode. The current–time curve and open circuit potential (OCP) of dopamine solution show the performance of this prototypical system.     

Use of thin layer spectroelectrochemistry in the study of NADH regeneration by means of an hydrogenase

Abstract

Thin layer spectroelectrochemistry is used to show that it is possible to mediate the electrochemical reduction of NADH by means of an hydrogenase. This kind of cofactor regeneration is associated to three model reactions involving the reduction of pyruvate, acetoacetylCoA and ketoglutarate.     

磁性壳聚糖去除水中腐殖酸的研究

采用高温水热法合成了磁性壳聚糖,并研究了其对水中腐殖酸(HA)的吸附、脱附行为。表征结果表明,磁性壳聚糖粒径大小为200～300nm,氨基含量1.29mmol·g-1,BET比表面积36.00m2·g-1,饱和磁化强度为38.78emu·g-1,易于磁性分离。HA在磁性壳聚糖上的吸附等温线可用Freundlich方程模拟,吸附动力学符合拟二级动力学方程。HA的吸附量随溶液pH值的升高而降低,随不同阳离子浓度增加而增加,不同类型的阳离子对HA吸附效果影响的大小顺序为:Ca2+Mg2+Na+K+。经5个脱附再生循环,磁性壳聚糖仍能保持79.8%的吸附量,表明该吸附剂再生性好,可循环使用。     

Peptoids bearing tertiary amino residues in the n-alkyl side chains: synthesis of a potent inhibitor of Semaphorin 3A

A study on the preparation of N-alkylglycines (peptoids) that contain tertiary amino residues on the N-alkyl side chains is reported. The appropriate combination of the submonomer strategy with N-alkylglycine monomer couplings depending upon the structure of the N-alkyl side chain that must be incorporated into the peptoid is determinant for the efficiency of the synthetic pathway. The application of this strategy to the preparation of SICHI, an N-alkyglycine trimer containing tertiary amino residues in the three N-alkyl branches, and that has been identified as a potent Semaphorin 3A inhibitor, is presented.     

METHANE REFORMING WITH CARBON DIOXIDE TO PRODUCE SYNGAS?a?aCATALYST REGENERATION

The regeneration conditions of the deactivated catalyst 18wt%NiO/a-A12O3 used in methane reforming with carbon dioxide were studied by using a fix-bed flow reactor and TPR technique. When the deactivated catalyst was reduced at 1 123 K in a conventional regeneration process, the activity increased a little, but was still much lower than that of the fresh catalyst. When the deactivated catalyst was reduced, then treated in site With an activity-rejuvenating agent of 5-10 vo1% C (aqueous hydrogen peroxide solution) and reduced again at 1123K, the activity was renewed to approach that of the fresh one.     

TG Study of the Kinetic Parameters of Regeneration of Coked HZSM-5 Zeolite

A thermogravimetric method is proposed for study of the kinetic parameters of coked HZSM-5 zeolite regeneration. The technique, which makes use of integral thermogravimetric curves, was optimized by microprocessed integrated mathematical methods. The kinetic parameters obtained from the TG curves are the activation energy, the rate constants, the half-life times, and in particular the coke removal time as a function of temperature. The activation energy calculated by using the Flynn and Wall kinetic method was 81.4 kJ mol⁻¹. It was observed that, to remove 99% of the coke from the zeolite in a period of 1 h, it would be necessary to carry out thermo-oxidation at 748 K, with a dry air purge flow of 120 cm³ min⁻¹. This revised version was published online in August 2006 with corrections to the Cover Date.