液晶光定向层材料

本文综述了近10年来液晶显示用光定向层材料领域的研究现状和进展情况，主要概述了光降解型、光致异构型、光交联型以及自组装等材料，并对目前报道的液晶光定向机理进行了总结和归纳。     

~(13)C NMR法研究环氧戊烯醛的热异构化

本文利用~(13)C NMR方法研究顺式环氧戊烯醛(1)的热异构化。测定了1在受热前后的~(13)CNMR谱,标识了它和它的热异构化产物的~(13)C NMR谱线;通过对异构化过程的动力学考察,表明1的热转化遵从一级反应规律,分别求出了80,100,120和140℃下的反应速度常数,并估算了活化能;同时也监测了异构化产物的变化过程。     

Simulation of a Combined Isomerization Reactor & Pressure Swing Adsorption Unit

The Total Isomerization Process developed by Union Carbide in 1970 (Gary, 1987) for the conversion of normal paraffin's to their isomers consists of a reactor followed by a PSA unit each operating at similar pressures and temperatures. The combination of these two operations in one unit in a Pressure Swing Adsorption Reactor (PSAR) process may provide an increased throughput and a significant cost saving in ancillary equipment.The simulation of a mathematical model linking the catalyst packed-bed and the adsorbent packed-bed is reported. The catalyst is a Pd/Y-zeolite and the adsorbent is 5A zeolite. The simulated feed consists of 17% each of n- and isopentane with the remainder being hydrogen. The mathematical model assumes dispersed plug-flow in both sections, constant velocity in the reactor section but varying in the adsorber, with mass transfer in the adsorber section due to external fluid film resistance and macropore diffusion in series. The fraction of the total column length occupied by the catalyst (denoted by ) is accounted for in the model by solving numerically using orthogonal collocation on finite elements. Parameters varied are the ratio of catalyst/column length (), temperature range (506–533 K), high pressure (15–20 bars), with the low pressure held constant at 2 bars. The catalyst/column ratio has a strong effect at low temperatures. The optimum catalyst/column length ratio appears to be controlled by the low pressure step and occurs at = 0.7 for the assumptions used in this work.     

Benzazetines and their derivatives (review)

Published information on methods for the production of benzazetines and their dehydro derivatives (benzazetes) and their chemical transformations is reviewed and analyzed. It was noted that benzazetines with an unsubstituted NH group are unstable and their stable representatives have only became accessible in recent years. The tendency of benzazetines to undergo opening of the four-membered heterocycle and isomerization processes was demonstrated. The wide-ranging synthetic possibilities of benzazetines and benzazetes are indicated. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1763–1783, December, 2007.     

Potential energy surface of thionylimide

The potential energy surface (PES) of thionylimide has been searched using ab initio MO and density functional calculations. The electronic structures of the isomers of HNSO have been studied using the HF/6‐31+G*, MP2(full)/6‐31+G*, and B3LYP/6‐31+G* levels. Final energies of these molecules have been calculated at the high‐accuracy G2 and CBS‐Q levels. The probable pathways of isomerization of thionylimide to its isomers (e.g., thiocyanic acid, HONS, nitrosothiols) have been explored by studying the three‐ or four‐membered transition states. This study identified total eight possible isomers ( 1–8 ) of HNSO, of which four ( 1–4 ) have already been realized experimentally. Of the remaining four ( 5–8 ), at least two ( 5, 7 ) can be generated experimentally. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Vanadium Doped Sol-Gel TiO2 Coatings

A study of the experimental conditions required to obtain vanadium doped sol-gel TiO2 coatings is presented. Tetraethyl orthotitanate was employed as the TiO2 source and VCl3, VOSO4 · H2O and VOSO4 dissolved H2SO4 where employed as vanadium sources.Dip coating has been used to produce coatings on silicon wafers, spectral carbon electrodes and titanium electrodes. Both supported and unsupported films have been studied by UV-Vis spectra, IR spectroscopy and X-ray diffraction (XRD). The measurements have been made on samples as prepared and treated thermally at temperatures between 100°C and 300°C. The thermal treatment temperatures have been established from DTA/TGA measurements.The vanadium doped sol-gel TiO2 coatings have been tested as sensors for redox potential measurements in electrochemical processes. The influence of both the thickness of films and the nature of substrate has been investigated.     

Zur Struktur und Reaktivität des Diammoniumhexafluoromanganats(IV)

About the Structure and Reactivity of Diammonium Hexafluoromanganate(IV) Electrolytic oxidation of an aqueous suspension of MnF₂ containing NH₄F, and subsequent crystallization in 40% HF yields yellow crystals of (NH₄)₂MnF₆. It crystallizes in the hexagonal K₂MnF₆ type structure with the space group P6₃mc and a = 5.903; c = 9.565 Å; Z = 2. With in situ powder diffraction studies it is shown, that (NH₄)₂MnF₆ is gradually reduced in a NH₃ atmosphere between 30 and 230 °C to afford (NH₄)₃MnF₆, (NH₄)₂MnF₅, and finally NH₄MnF₃. (NH₄)₃MnF₆, thereby, forms a hitherto unknown cubic (a = 9.082 Å) high temperature modification with the cryolite type structure. Under N₂ the thermal decomposition of (NH₄)₂MnF₆ proceeds via NH₄MnF₄ to yield MnF₂.     

Density Functional Theory and Low-Temperature Matrix Investigations of CO-Loss Photochemistry from [(C<Subscript>5</Subscript>R<Subscript>5</Subscript>)Ru(CO)<Subscript>2</Subscript>]<Subscript>2</Subscript> (R = H,Me) Complexes

The photochemical CO-loss products of the diruthenium complexes [CpRu(CO) ₂]₂ (5; Cp = ⁵-C₅H₅), [Cp*Ru(CO)₂]₂ (5*; Cp* = ⁵-C₅(CH₃)₅) and CpCp*[Ru(CO)₂]₂ (5) have been studied experimentally in low-temperature (96 K) matrices in 3-methylpentane by using IR spectroscopy. It is proposed that all three complexes undergo single-CO-loss chemistry but that the products have different structures. The single-CO-loss product from 5 is proposed to have one bridging and two terminal carbonyl ligands, whereas 5* and 5 generate triply bridged CO-loss products similar to that observed from [CpFe(CO)₂]₂ and [Cp*Fe(CO)₂]₂. Double-CO-loss from 5* and 5* 9 is also apparently observed. Relativistic DFT calculations have been carried out on various isomers of the starting materials and on potential CO-loss products from 5. The calculations suggest that the triply bridged product Cp₂Ru₂(-CO)₃ (6) might have a singlet ground state in contrast to the corresponding diiron complex Cp₂Fe₂(-CO)₃ (3), which has a triplet ground state.     

Isomerization ofn-hexane overplatinum loaded zeolites

The effect of the calcination temperature of bifunctional Pt/zeolites on the isomerization ofn-hexane has been investigated. The catalyst calcined at 350°C showed the highest metal dispersity and the best activity. The higher selectivity of dimethylbutanes over Pt/H- than over Pt/H-MOR might be attributed to the combined effect of acidity, channel structure and pore size of zeolites.     

Design and Development of Zeolite-Based Catalytic Processes for Aromatics Production

Processes for the production of xylenes, which occur in an integrated aromatic complex, are discussed. A brief overview of the work carried out at Indian Petrochemicals Corporation Limited for the development of zeolite-based catalytic processes for the production of aromatics is presented. This includes xylene isomerization, transalkylation and disproportionation of C₇ and C₉ aromatics for maximization of xylenes, selective disproportionation of toluene and selective alkylation of mono-alkylaromatics to p-dialkylbenzene. Achievements in the commercialization of zeolite-based catalysts and processes for isomerization of m-xylene to p- and o-xylene along with dealkylation of ethylbenzene, and for selective ethylation of ethylbenzene to produce p-diethylbenzene are highlighted.