正交各向异性压磁电弹性矩形板的稳定问题

从压磁电弹性力学的三维平衡方程和本构关系出发,推导得到了正交各向异性压磁电弹性矩形板稳定问题的状态方程。求解状态方程并结合边界条件得到了稳定问题的屈曲方程。给出了临界应力的算例。     

ANALYSIS ON THE MAGNETO-ELASTIC-PLASTIC BUCKLING/SNAPPING OF CANTILEVER RECTANGULAR FERROMAGNETIC PLATES

An analysis of buckling/snapping and bending behaviors of magneto-elastic-plastic interaction and coupling for cantilever rectangular soft ferromagnetic plates is presented.Based on the expression of magnetic force from the variational principle of ferromagnetic plates,the buckling and bending theory of thin plates,the Mises yield criterion and the increment theory for plastic deformation,we establish a numerical code to quantitatively simulate the behaviors of the nonlinearly multi-fields coupling problems by the finite element method.Along with the phenom- ena of buckling/snapping and bending,or the characteristic curve of deflection versus magnitude of applied magnetic fields being numerically displayed,the critical loads of buckling/snapping, and the influences of plastic deformation and the width of plate on these critical loads,the plastic regions expanding with the magnitude of applied magnetic field,as well as the evolvement of deflection configuration of the plate are numerically obtained in a case study.     

Bending of Composite Plates under Static and Dynamic Loading

The stationary bending of a two-dimensional elastic system of joined rectangular plates with different mechanical properties and boundary conditions is studied. A technique for solving the corresponding problem is proposed. It is based on approximate approaches in combination with a generalization of the force method. It is established that the static strain state of the system is essentially dependent on the difference between the elastic moduli of the constituent plates. It is also shown that with certain boundary conditions, the dependence of the first resonant frequency on the relative position of plates along the contact line is nonmonotonic__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 1, pp. 77–84, January 2005.     

功能梯度矩形厚板的三维热弹性分析

直接从三维热弹性力学基本方程出发，通过引入两个位移函数和两个应力函数，导出了一个二阶的齐次状态方程和一个四阶的非齐次状态方程。分析中采用了层合近似模型，即将板划分成厚度足够小的若干薄层，从面可将每一层内的材料常数近似为常数。给出了任意厚度的四边简支横观各向同性功能梯度矩形板的热弹性分析，特别当板较薄时，与薄板理论进行了数值对比，发现两者结果吻合很好。最后研究了材料梯度指标对热弹性场的影响，结果显示梯度指标对热应力和位移都有着显著的作用：在不同的区间，梯度指标对它们有不同的影响；并且在同一区间，梯度指标对两者的影响程度也有所不同。     

Field-flow fractionation in microfluidic channels of low aspect ratio

The shape of the steady-state three-dimensional flow velocity profile established in carrier liquid flowing inside the rectangular cross-sectional channel for field-flow fractionation should be taken into account to optimize the separation. The central parts of this profile in the planes parallel to the main channel walls are flat with almost identical flow velocities which drop down to zero at the side walls. The separated species transported by the flow in the close-to-side walls regions move with lower average velocities compared to the species transported in the central part of the channel and are undesirably broadened. The hydrodynamic splitting of the carrier liquid at the entry of the channel where the sample is injected only into the central part of the channel eliminates the excessive zone broadening. The aspect ratio of the breadth to the thickness of the channel ratio can thus be reduced. The effect of various aspect ratios on the shape of the flow velocity profile is calculated and the results are used to optimize the aspect ratio of microfluidic channels. The experiments carried out by microthermal field-flow fractionation confirmed that the aspect ratio cannot be reduced to a value of 1, proposed by other authors.     

On the solution of plane boundary-value problems of elasticity in a rectangle

An algorithm for solving plane boundary-value problems of elasticity for a rectangular domain is expounded. The algorithm is based on a complex-valued representation of the general solution to the differential equations of the plane problem and on the use of Lagrange polynomials to satisfy the boundary conditions. The algorithm can quite easily be implemented in a computer program. This is probably the simplest way of solving boundary-value problems of this class __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 1, pp. 97–102, January 2006.     

The problems of nonlinear bending for orthotropic rectangular plate with four clamped edges

（黄家寅）（秦圣立）ＴＨＥＰＲＯＢＬＥＭＳＯＦＮＯＮＬＩＮＥＡＲＢＥＮＤＩＮＧＦＯＲＯＲＴＨＯＴＲＯＰＩＣＲＥＣＴＡＮＧＵＬＡＲＰＬＡＴＥＷＩＴＨＦＯＵＲＣＬＡＭＰＥＤＥＤＧＥＳ￥ＨｕａｎｇＪｉａｙｉｎ;ＱｉｎＳｈｅｎｇｌｉ（ＱｕｆｕＮｏｒｍａｌＵｎ...     

A METHOD OF DETERMINING BUCKLED STATES OF THIN PLATES AT A DOUBLE EIGENVALUE

A method of determining bifurcation directions at a double eigenvalue is presented by combining the finite element method with the perturbation method. By using the present method, the buckled states of rectangular plates at a double eigenvalue are numerically analyzed. The results show that this method is effective.     

窄长方形贮箱中液体的强迫晃动

本文求解了窄长方形贮箱中液体的强迫晃动，给出激励中含恒定分量时的几种液面波高修正方法，并对它们作了比较．     

气相爆轰波在90矩形弯管中传播时胞格结构的演化

利用烟迹技术实验获得气相爆轰波在90矩形弯管中传播时留下的胞格图案，详细分析了胞格结构在矩形弯管中的演化规律。同时分析了90矩形弯管的曲率半径和预混气体初始压力对胞格结构演化的影响。实验所采用的预混气体初始压力为33.3、26.7、24.0、16.0、10.7 kPa，90矩形弯管的曲率半径分别为100、50 mm。研究爆轰波胞格结构在弯管中的演化过程有助于深入了解气相爆轰波绕射机理和石油天然气等管道设计。