FOURIER TRANSFORM FAR INFRARED SPECTRA AND NORMAL COORDINATE ANALYSIS OF FIFTEEN RARE-EARTH OXALATE HYDRATES

The Fourier transform far infrared spectra of oxalate hydrates of whole rare-earth series except Pm and Sc are investigated in the range of 100-400 cm~(-1). The assignment of vibrational frequencies is made on the basis of normal coordinate analysis using our NORVIB program. The model used for the hghter elements of the lanthanide series (La to Eu) is based on the crystal structure of Nd_2(C_2O_4)_3. 10H_2O, in which each lanthanide ion is surrounded by nine O atoms, six from three oxalate ions and three from Water molecules.The model adopted for the heavier elements of the lanthanide series (Gd to Lu) and Ytterbium is based on the crystal structure of Yb_2(C_2O_4)_3· 6H_2O, in which each ion is surrounded by eight atoms, six from three oxalate ions and two from water molecules. The variation of the metal-ligand frequencies and force constants with the atomic numbers of lanthanides is plotted and discussed.     

Oxidation of thiol compounds by molecular oxygen in aqueous solutions

Side self-oxidation of thiols was studied. It was found that these reactions in neutral and alkaline solutions are induced by impurities of variable-valence metals. The ability of transition metals to catalyze oxidation of thiols changes in the order Cu > Mn > Fe > Ni Co. The plot of the self-oxidation rate vs. pH passes through a maximum whose position on the pH scale depends on both the nature of metal and the structure of the thiol oxidized. For thiols having different structures, the kinetic orders in reactions catalyzed by copper ions differently vary with pH, which is apparently associated with the formation of complexes possessing different catalytic activity.     

On-site preconcentration and trace metal ions determination in the Okavango Delta water system, Botswana

Microcolumns containing 8-hydroxyquinoline azo-immobilized on controlled pore glass were incorporated in a field sampler for on-site collection, isolation and preconcentration of trace metal ions in waters of the Okavango Delta, Botswana. Sequestered trace metal ions were recovered by elution with 0.5 ml of 1.5 M nitric acid, and determined by graphite furnace atomic absorption spectrometry (GFAAS). This sampling and enrichment method minimizes sample contamination, and collection of large volumes of water samples for transporting, over long distances, to analytical laboratories is avoided.Data reported comprise one of the initial surveys on trace metal ion concentrations in waters of the Okavango Delta, Botswana. In waters with more efficient mixing, dissolved metal ion concentrations found were generally low with slightly elevated levels of manganese (7-19 μg l⁻¹), zinc (2.7-4.8 μg l⁻¹), nickel (0.2-2.5 μg l⁻¹) and copper (0.3-2.1 μg l⁻¹). For each trace metal ion, concentration levels seem to reflect zones of varying water conveyance, and show no obvious temporal and spatial variations apart from a slight increment from the inlet in the upper Delta to the outlets in the lower Delta.     

水中痕量酚的富集和紫外分光光度测定法的研究

本文研究了用微型树脂柱快速富集,分离,紫外分光光度测定水中痕量酚的方法。结果表明,以GDX-502为吸附剂,水样pH为1～3并含0.2mol/L氯化钠,以每分种15～20ml的速度通过吸附柱,以热的1％氢氧化钠水溶液为淋洗剂时,在291nm处测定苯酚的回收率为89～98％。此外探讨了干扰物的消除方法。吸附柱对苯酚的富集倍数达300倍,最低检测限为0.001ppm。方法精密度为0.3(％),相对标准偏差为3.18％。本法对实际水样进行了测定。结果满意。     

Formation of Negative Hydrogen Ions in a Ne–H2 Hollow Cathode Discharge

The formation of negative hydrogen ions in a conventional hollow cathode discharge has been investigated. A mixture of Ne and H₂ proved to be more advantageous compared to pure hydrogen. The study has been performed by solving the electron Boltzmann equation, coupled with a system of balance equations for neon and hydrogen neutral and charged particles. The vibrational distribution function of hydrogen has been calculated. Our calculations show unusually high population of vibrationally excited hydrogen molecules in a Ne–H₂ mixture, which explains the high density of negative hydrogen ions under optimal conditions (total gas pressure of few Torr, hydrogen number mole fraction of 1–10% and discharge current of 10–100 mA). Line intensities originating from highly excited neon states vs. hydrogen pressure have been calculated and a comparison with existing experimental results has been made.     

Limiting Partial Molar Volumes of Electrolytes in 2-Methyl-2-Butanol <Emphasis Type="Bold">+</Emphasis> Water Mixtures at 298.15 K

Partial molar volumes at infinite dilution, V⁰₂, of alkali–metal halides (LiCl, NaCl KCl RbCl CsCl, NaBr, KBr, KI), tetra-n-alkylammonium bromides, R₄NBr (R=Me, Et, n-Pr, n-Bu, n-Pen), NaBPh₄, and Ph₄PCl have been determined in binary solvent mixtures of water with 2-methyl-2-butanol covering the water-rich region and the alcohol-rich region at 298.15 K. V⁰₂ for alkali–metal halides show relatively little dependence on the solvent composition. However, in the case of hydrophobic electrolytes the observed effects are more pronounced. A good linear dependence between V⁰₂(R₄NBr) and the molecular weight of the tetra-n-alkylammonium cation is found. Limiting single-ion volumes have been obtained using the assumption that V⁰(Ph₄P⁺)–V⁰(BPh^–₄)=2.0 cm³-mol^–1. The trends in the single-ion volumes are discussed in both solvent regions.     

Pulse radiolysis study of I− oxidation with radical anions Cl2 ⋅− in an aqueous solution

Radiation-chemical transformations of chloride solutions in the presence of iodide additives were studied by pulse radiolysis. Radical anion Cl₂ ^⋅− oxidize I⁻ ion, while in the secondary reactions Cl₂ reacts with I⁻ to form a mixed trihalide ion ICl₂ ⁻. A reaction model that satisfactorily describes the experimental data was proposed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1336–1340, June, 2005.     

RExOy.nH2O对氟离子的吸附性能

La、Ce等稀土水含氧化物对阴离子的吸附性早有研究「‘－‘1，但从混合轻稀土氯化物制得的水合氧化物吸附F一的研究报道较少．为探讨难溶金属水合氧化物的除氟性能，本文以混合轻稀土氯化物为原料，制得其水含氧化物（RExOy·nH。O），采用高聚物造粒，研究了粒状RExOy·nH。O对F一的吸附性能及吸附机理．所用混合轻稀土氯化物由包头钢铁稀土公司提供，其主要组成（以氧化物计）为：CeO。（50％）、Nd。O3（25％）、La。O。（15％）、P36Oll（8％）．聚丙烯睛分子量为（2．5～5）X10‘．其它试剂为分析纯．RExO．·nH。O参照文…     

Use of a Carbon Paste Electrode Modified with Spinel‐Type Manganese Oxide as a Potentiometric Sensor for Lithium Ions in Flow Injection Analysis

A potentiometric sensor constructed from a mixture of 25% (m/m) spinel‐type manganese oxide (lambda‐MnO₂), 50% (m/m) graphite powder and 25% (m/m) mineral oil is used for the determination of lithium ions in a flow injection analysis system. Experimental parameters, such as pH of the carrier solution, flow rate, injection sample volume, and selectivity for Li⁺ against other alkali and alkaline‐earth ions and the response time of this sensor were investigated. The sensor response to lithium ions was linear in the concentration range 8.6×10^?5–1.0×10^?2 mol L^?1 with a slope 78.9±0.3 mV dec^?1 over a wide pH range 7–10 (Tris buffer), without interference of other alkali and alkaline‐earth metals. For a flow rate of 5.0 mL min^?1 and a injection sample volume of 408.6 μL, the relative standard deviation for repeated injections of a 5.0×10^?4 mol L^?1 lithium ions was 0.3%.     

Separating Ag, B, Cd, Dy, Eu, and Sm in a Gd matrix using 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester extraction chromatography for ICP-AES analysis

The separation procedure for Ag, B, Cd, Dy, Eu and Sm as impurities in Gd matrix using ICP-AES technique with an extraction chromatographic column has been developed. The spectral interference of the Gd matrix on the elements was eliminated using a chromatography technique with 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) as the mobile phase and XAD-16 resin as the stationary phase. Ag⁺, B₄O₇²⁻, and Cd²⁺ were eluted with 0.1 M HNO₃, while rare earth ions were not. The best eluent for separating Eu and Sm in the Gd matrix was 0.3 M HNO₃. The limit of quantitation for these elements was 0.6-3.0 ng mL⁻¹. The recovery of Ag, B, and Cd was 90-104% using 0.1 M HNO₃ as the eluent, while that of Eu, Gd, and Sm ranged from 100 to 102% with 0.3 M HNO₃. Dy was recovered quantitatively with 4 M HNO₃. The relative standard deviation of the methods for a set of three replicates was between 1.0 and 15.4% for the synthetic and standard Gd solutions. The proposed separation procedure was used to measure Ag, B, Cd, Dy, Eu, and Sm in a standard Gd solution.