多组分烟用香精定量分析方法的研究进展

综述了近年来烟用香精、香料各组分化合物的定量分析方法的研究进展。面积归一化法、内标法、外标法和标准加入法等常用色谱定量分析方法主要用于烟用香精、香料中目标化合物或单个组分的测定;多标定量法、特征峰-内标定量法和多元校正法能深入剖析烟用香精复杂体系中各组分含量(引用文献48篇)。     

分子生物学手段检测转Bt基因棉花中Cry杀虫蛋白的定性和定量方法

建立了转Bt基因棉花中Cry杀虫蛋白的提取、样品前处理以及酶联免疫(ELISA)定量分析方法,并使用凝胶电泳、普通聚合酶链式反应(PCR)和实时荧光定量PCR等分子生物学手段对转基因棉花中的Bt基因进行定性和定量检测.所建立的苏云金芽孢杆菌杀虫晶体蛋白(Cry1Ab蛋白和Cry1Ac蛋白)标准曲线线性关系良好,相关系数r2均大于0.999,相对标准偏差RSD均小于2.0%.方法简单、快速、重现性和精密度好,可为农业食品行业和环境领域科研人员提供一种简便快速地从转基因棉花中检测Bt毒蛋白的分析方法.     

一种用于活体细胞Zn2+检测的高灵敏度比例计量荧光探针

无论是在水溶液还是乙腈溶液中,2-PBI(2-(2′-吡啶基)苯并咪唑)的发射光谱都表现出一定的红移,但由于该分子对Zn2+低的结合能力以及多变的配位比例,2-PBI不能作为一个比例计量型的Zn2+荧光探针。本研究通过在2-PBI的5位引入推电子基团N,N-二甲基,增加探针的配位原子数同时促进探针的ICT效应,设计合成比例计量型Zn^2+荧光探针DBITA。实验结果表明,除了172 nm的大斯托克斯位移外,DBITA还表现出特定的Zn^2+诱导的红移,发射波长从534 nm红移到609 nm,DBITA与Zn^2+以1∶1比例结合。此外,DBITA对Zn^2+表现出极高的亲和力,配合物DBITA/Zn^2+结合的Kd值为0.16 pmol·L^-1。在HeLa细胞中,DBITA完成了细胞内的Zn^2+的定量造影。     

Quantitative Comparison of the Marker Compounds in Different Medicinal Parts of Morus alba L. Using High-Performance Liquid Chromatography-Diode Array Detector with Chemometric Analysis

It is thought that the therapeutic efficacy of Morus alba L. is determined by its biological compounds. We investigated the chemical differences in the medicinal parts of M. alba by analyzing a total of 57 samples (15 root barks, 11 twigs, 12 fruits, and 19 leaves). Twelve marker compounds, including seven flavonoids, two stilbenoids, two phenolic acids, and a coumarin, were quantitatively analyzed using a high-performance liquid chromatography-diode array detector and chemometric analyses (principal component and heatmap analysis). The results demonstrated that the levels and compositions of the marker compounds varied in each medicinal part. The leaves contained higher levels of six compounds, the root barks contained higher levels of four compounds, and the twigs contained higher levels of two compounds. The results of chemometric analysis showed clustering of the samples according to the medicinal part, with the marker compounds strongly associated with each part: mulberroside A, taxifolin, kuwanon G, and morusin for the root barks; 4-hydroxycinnamic acid and oxyresveratrol for the twigs and skimmin; chlorogenic acid, rutin, isoquercitrin, astragalin, and quercitrin for the leaves. Our approach plays a fundamental role in the quality evaluation and further understanding of biological actions of herbal medicines derived from various medicinal plant parts.     

Quantitative evaluation on oil diffusion mechanisms in nano‐organic‐montmorillonite modified caster oil‐based polyurethane foam for oil/water separation

To improve the oil absorbency of caster oil‐based polyurethane foam, nano‐organic‐montmorillonite (OMMT) was used for the additives. The aim of this study is to evaluate the oil diffusion mechanism and dispersion uniformity of OMMT modified caster oil‐based polyurethane (MPU) using experiments and molecular dynamic simulation. Molecule movement and molecule trajectory of oil was investigated by molecular dynamic simulation and numerical simulation. According to the quantitative analyzing results, the diffusion model was put forward. The average diffusion coefficient of crude oil in 0, 1, 2 wt%, 4, and 6 wt% MPU is 2.4 × 10^?4 cm²/s, 2.6 × 10^?4 cm²/s, 3.0 × 10^?4 cm²/s, 3.2 × 10^?4 cm²/s, and 3.3 × 10^?4 cm²/s, respectively. It indicated that crude oil appeared gradient in the MPU. The optimal diffusion direction of crude oil is (0, 0, 1) crystal face, and the small particles of crude oil are easy to be adsorbed. The two‐dimensional diffusion trajectory of crude oil is nonlinear. The diffusion model includes the diffusion of crude oil at the interface of oil and polyurethane, surface diffusion and pore diffusion, and pore adsorption. Furthermore, the diffusion model showed that the van der Waals force was the main reason for crude oil diffusion or adsorption. OMMT could improve the ability of oil/water separation of polyurethane.     

Qualitative and quantitative analysis of major constituents from Dazhu Hongjingtian capsule by UPLC/Q‐TOF‐MS/MS combined with UPLC/QQQ‐MS/MS

In this work, a sensitive and efficient method was established and validated for qualitative and quantitative analysis of major bioactive constituents in Dazhu Hongjingtian capsule by liquid chromatography tandem mass spectrometry. A total of 32 compounds were tentatively identified using ultra‐performance liquid chromatography coupled with quadrupole time‐of‐flight mass spectrometry. Furthermore, 12 constituents, namely gallic acid, 3,4‐dihydroxybenzoic acid, salidroside, p‐ coumaric acid‐4‐O ‐β ‐d ‐glucopyranoside, bergeninum, 4‐hydroxybenzoic acid, 4‐hydroxyphenylacetic acid, syringate, 6′′‐O ‐galloylsalidroside, rhodiosin, rhodionin and kaempferol‐7‐O ‐α ‐l ‐rhamnoside, were simultaneously quantified by the developed ultra‐performance liquid chromatography coupled with a triple quadrupole mass spectrometry method in 9 min. All of them were analyzed on an Agilent ZorBax SB‐C₁₈ column (3.0 × 100 mm, 1.8 μm) with linear gradient elution of methanol–0.1% formic acid water. The proposed method was applied to analyze three batches of samples with acceptable linearity (R , 0.9979–0.9997), precision (RSD, 1.3–4.7%), repeatability (RSD, 1.7–4.9%), stability (RSD, 2.2–4.9%) and recovery (RSD, 0.6–4.4%) of the 12 compounds. As a result, the analytical method possessing high throughput and sensitivity is suitable for the quality control of Dazhu Hongjingtian capsule.     

Preliminary study on aerosol particle addition calibration method for on-line quantitative analysis of airborne radioactive particles with ICP-MS

An ambient aerosol concentration enrichment system coupled with ICP-MS for real-time monitoring of airborne radioactive particles is now under development. ICP-MS is very sensitive to sample introduction conditions, so it is necessary to develop an easy-use calibration method for on-line quantitative analysis in field application. In this paper, a calibration method using standard solution instead of monodisperse particles was established and validated preliminarily. First of all, four parameters for the method were determined experimentally, including: uptake flow rate and nebulisation efficiency of the Microconcentric nebuliser, nebulisation/transport efficiency of Aridus Desolvating Sample Introduction System, and Relative Sensitivity Factor between ¹⁵⁹?Tb and ¹⁷⁴?Yb. Then, monodisperse terbium nitrate particles were generated by a commercial Vibrating Orifice Aerosol Generator. Continuous aerosols of ytterbium nitrate droplets were nebulised from standard solution. They were mixed together, desolvated through the membrane dryer and introduced into ICP-MS for on-line analysis of terbium nitrate particles. The air sampled from nuclear environment was also introduced into ICP-MS to investigate the effect of flow rate on instrument responses. Finally, atom numbers of ¹⁵⁹?Tb in discrete terbium nitrate particles were determined using the calibration method and compared to the calculated value. Results show that when air flow rate increase from 10?mL?min^?1 to 100?mL?min^?1, the ratio of ¹⁵⁹?Tb ion count to ¹⁷⁴?Yb ion intensity keeps constant although instrument sensitivity decreases by a factor of 25. The relative standard deviation of ¹⁵⁹?Tb atom number measured is better than 18%. The discrepancy with the calculated value could be attributed to the over-estimation of atom number in the particles generated by VOAG because there was some liquid leakage in the VOAG.