Preliminary study on aerosol particle addition calibration method for on-line quantitative analysis of airborne radioactive particles with ICP-MS

An ambient aerosol concentration enrichment system coupled with ICP-MS for real-time monitoring of airborne radioactive particles is now under development. ICP-MS is very sensitive to sample introduction conditions, so it is necessary to develop an easy-use calibration method for on-line quantitative analysis in field application. In this paper, a calibration method using standard solution instead of monodisperse particles was established and validated preliminarily. First of all, four parameters for the method were determined experimentally, including: uptake flow rate and nebulisation efficiency of the Microconcentric nebuliser, nebulisation/transport efficiency of Aridus Desolvating Sample Introduction System, and Relative Sensitivity Factor between ¹⁵⁹?Tb and ¹⁷⁴?Yb. Then, monodisperse terbium nitrate particles were generated by a commercial Vibrating Orifice Aerosol Generator. Continuous aerosols of ytterbium nitrate droplets were nebulised from standard solution. They were mixed together, desolvated through the membrane dryer and introduced into ICP-MS for on-line analysis of terbium nitrate particles. The air sampled from nuclear environment was also introduced into ICP-MS to investigate the effect of flow rate on instrument responses. Finally, atom numbers of ¹⁵⁹?Tb in discrete terbium nitrate particles were determined using the calibration method and compared to the calculated value. Results show that when air flow rate increase from 10?mL?min^?1 to 100?mL?min^?1, the ratio of ¹⁵⁹?Tb ion count to ¹⁷⁴?Yb ion intensity keeps constant although instrument sensitivity decreases by a factor of 25. The relative standard deviation of ¹⁵⁹?Tb atom number measured is better than 18%. The discrepancy with the calculated value could be attributed to the over-estimation of atom number in the particles generated by VOAG because there was some liquid leakage in the VOAG.     

Binding models of reversible inhibitors to type-B monoamine oxidase

Interest in the inhibitors of type-B monoamine oxidase has grown in recent years, due to the evidence for multiple roles of one such agent (selegiline) in the pharmacological management of neurodegenerative disorders. A set of 130 reversible and selective inhibitors of MAO-B (including tetrazole, oxadiazolone, and oxadiazinone derivatives) were taken from the literature and subjected to a three-dimensional quantitative structure–activity relationship (3D-QSAR) study, using CoMFA and GOLPE procedures. The steric and lipophilic fields, alone and in combination, provided us with informative models and satisfactory predictions (q²=0.73). The validity of these models was checked against the 3D X-ray structure of human MAO-B. Flexible docking calculations, performed by using a new approach which took advantage from QXP and GRID computational tools, showed the diverse inhibitors to interact with MAO-B in a similar binding mode, irrespective of the heterocycle characterizing them. A significant trend of correlation was observed between estimated energies of the complexes and the experimental inhibition data.     

博莱霉素切割DNA反应的定量测定及其影响因素

用硫代巴比妥酸反应分析了博莱霉素 Ａ５ （ Ｂ Ｌ Ｍ Ａ５ ）对 Ｄ Ｎ Ａ 的断裂作用在 Ｆｅ２＋ 和 Ｏ２存在下, Ｂ Ｌ Ｍ Ａ５能导致 Ｄ Ｎ Ａ 链断裂研究了一些因素对 Ｂ Ｌ Ｍ Ａ５ 催化 Ｄ Ｎ Ａ 断链反应的影响,设计并建立了 Ｂ Ｌ Ｍ Ａ５ 切割 Ｄ Ｎ Ａ 反应的定量测定方法,并测得 Ｋｍ 约为１５３ μｍ ｏｌ· Ｌ－ １, Ｖｍ ａｘ 约为００４６ Ａ５３２ｎｍ Ｕｎｉｔ·ｓ－ １      

Novel quantitative non-destructive testing method for composite structures

A novel QNDT (quantitative non-destructive testing) method is developed that is combined with a phase-shifting shearing speckle and thermograph, and, it aims at the detection of faults such as cracks, voids, delamination and weak areas. The technique is immune to ambient noise and is suitable for measuring the in situ environment. Some different depth defects that would produce deformation differing from other positions could be found with shearing speckle when the sample is loaded, however, a thermograph based on the thermal resistance effect of a defect can detect only those varisized defects embedded deeply in the composite structure by measuring the surface temperature distribution. The resolution is examined for artificial delaminated defects in carbon-fiber composite structures using a phase-shifting shearing speckle and thermograph. The experimental results have demonstrated that the technique is effective for revealing defects in composite structures.     

煤粉燃烧过程中相转变点的小波识别

相变点的识别对研究煤粉的低温共熔和结焦有重要意义.本文分别对活性炭和加入SiO2的活性炭混合物的DSC曲线求导得到的DDSC曲线进行小波分析,提取DDSC曲线的近似部分和细节部分,得到更多关于相变的定量信息,再结合其TG,DTG曲线进行分析,实现对以上两种样品燃烧过程中相变点的识别;并将该方法运用到煤粉燃烧过程的相变分析中,对相变点后的烧结形态的场发射扫描电镜分析结果表明该方法是可行的.     

二异丙基酮定性定量方法的研究

采用色谱—质谱联用技术对酸—酸化反应制得的二异丙基酮化冷凝液进行了系统的定性,并且在色谱仪上利用外标法和面积归一化法对主要组分进行了定量方法的比较,得到了较好的定性定量结果。     

中国城市竞争力评价量化模型研究

本文建立一种将主、客观指标赋权方法优点相结合的城市竞争力综合评价分层构权主成分分析模型,在构建中国城市竞争力综合评价指标体系的基础上,基于该模型方法给出31个中国主要城市的城市竞争力的评价实例。并以并以判别分析方法对相关评价结果进行校验,实证分析的结果表明:这是一种适合于城市竞争力定量评价、稳定性较好且切实有效的方法模型。     

一种新的拓扑指数用于手性化合物的构效关系研究

为了研究羟酸类和氨基酸类手性化合物的构效关系,本实验引进了手性乘积算法:P＝(1-b/a)(1-c/b)(1-a/c)(1-a/d),其中a、b、c和d分别为与分子中手性中心碳原子4个不同连接片断手性eAm指数和分子连接性指数mx的计算值,并考察了所得参数与羟酸类和氨基酸类化合物手性薄层色谱保留指数的相关性.为了评定所得预测模型的稳定性,文中运用了交叉验证法.结果表明,由人工神经网络方法(BP法)所得数学模型比较稳定,且明显优于多元回归分析结果.