毛细管电泳安培检测扑热息痛及其水解物

研究了各种电化学预处理条件下碳纤维电极对扑热息痛及水解物的电化学行为。确定该体系最佳预处理条件为０．２Ｖ电位下阳极化１ｍｉｎ，再于－２．０Ｖ下阴极化１０ｓ。预处理后的碳纤维伏安响应得到明显提高。运用最佳条件并在支持电解中加入添加剂后，扑热息痛及其水解物在毛细管电泳上获得很好的分离和检测。其中扑热息痛的检测下限为２．７８ｐｇ；对氨基酚为１．８４ｐｇ。     

简便快速的硫化氢测定法

本文提出了有一种简易快速测定剂来测定水样中的硫化氢的方法。该法的检出限为０．１ｍｇ／Ｌ，对１．０１ｍｇ／Ｌ的Ｈ２Ｓ样品７次测定的相对标准偏差＜４．１％，１ｈ能测定１２个样品。用本测定了几种水样中的Ｈ２Ｓ含量，回收率为８４％－１０５％。应用它可上标准法的４ｈ左右缩短到５ｍｉｎ；使分析成本降低９／１０；不需配制一系列分析试剂和仪器，只需一支小型塑料管和几片药片，便于渔业水质和环境水质的野外现场监测。     

石英芯片电泳分离检测尿中蛋白的研究

通过对缓冲体系、缓冲液浓度、酸度、乳酸钙浓度、乙胺浓度、电泳电压和进样时间的优化选择，用石英芯片电泳一紫外检测法分离了纯人白蛋白和人运铁蛋白；在75mmol／L硼酸盐（pH10．55）（含0．8mmol／L乳酸钙、1％（φ）乙胺）运行缓冲液中，上述两组分在3min内完全分离；纯人白蛋白和人运铁蛋白的线性范围分别为1．0～15．0g/L和1．0～10．0g／L；检出限（S／N=3）均为0．5g／L，应用于临床尿蛋白分离测定，并与Helena琼脂糖凝胶电泳仪电泳结果进行比较，获得一致结果。     

On-chip potential gradient detection with a portable capillary electrophoresis system

A portable chip-CE system with potential gradient detection (PGD) was developed and applied to the determinations of alkali metals and alkaloids. The separation efficiency appeared to be satisfactory and nonaqueous capillary electrophoresis (NACE) proved to be applicable to PGD or conductivity detection. The power supplies, separation and detection were built on a device of 3 kg in weight. A branch channel near the end of the separation channel was designed to perform PGD and make the application of relatively high field strength possible. The study is the first report on the application of PGD on the microchip platform. The design of the chip-CE system shows several advantages, such as simplicity, miniaturization and wide applicability.     

对NO生理作用的新认识及其电化学实时检测

本文综述了近年来学术界对ＮＯ生理作用的新认识，并介绍了现场实时检测生物活体中释放的ＮＯ浓度的电化学方法．     

高温氧化-化学发光检测法测定水中总氮

采用高温氧化-化学发光检测法（high temperature oxidation ＆ chemiluminescence, HTO-CL）进行水质总氮（TN）的在线测定。总氮浓度（CN）与化学发光的强度（IN）呈良好的线性关系，线性区间为0．05～100mg／L。对真实水样采用本方法进行测定，其结果与国标方法相符，回收率在90％～110％之间。以本方法为工作原理的TN-2000型总氮测定仪可用于地表水质及污水的在线监测。     

奋乃静和氟奋乃静的毛细管电泳柱端喷壁式安培检测

应用自组装毛细管电泳．安培检测装置，建立了同时分离检测抗精神病药奋乃静与氟奋乃静的新方法。在1050mV(vs．Ag／AgCl)检测电位下，奋乃静与氟奋乃静的检出限分别达0．060mg／L与0．075mg／L。在最佳检测条件下，两组分的响应电流与浓度之间有着良好的线性关系，线性范围为0．75～75mg／L。将方法用于药物片剂以及模拟尿样和血清样品中奋乃静和氟奋乃静的测定，结果令人满意。     

High-performance anion-exchange chromatography of carbohydrates using a new resin and pulsed amperometric detection

Summary This paper reports the results of a study on the use of a new polymer-based, strong anion-exchange, stationary phase for rapid and selective separation of carbohydrates and related compounds by high-pH, anion-exchange chromatography with pulsed amperometric detection. The new adsorbent has been obtained by direct nitration of 2.8 μm, spherical non-porous highly cross-linked, styrene-divinylbenzene copolymer beads, followed by reduction of superficially introduced nitro groups with nascent hydrogen and quaternization of the resultant amino groups with iodomethane. It is reported that by optimizing the ionic strength of the mobile phase, columns packed with the new anion-exchanger can be successfully employed to separate, either in isocratic or gradient elution mode, oligosaccharides, positional isomers of gluco-disaccharides, as well as uronic acids and sugar monophosphates.     

Efficiency of four different techniques in coupled HPLC-UV/VIS to quantify overlapping peaks with known spectral features

Summary Four different techniques to quantify unresolved chromatographic peaks with known spectral features combined with photodiode array detection, are investigated as regards their efficiency for the accurate and precise determination of drugs in the low g-range. The comparison includes peak suppression utilising difference chromatograms, first-order derivative chromatograms, selective chromatograms, generated by the calculation of orthogonal polynomial shares, and the powerful least-squares multicomponent analysis approach. Each of these methods uses UV-spectra taken throughout, the peak. The results presented and conclusions reached should enable the chromatographer to come to a decision about the reasonable use of these options now provided by multichannel detection in HPLC.     

Anodic Stripping Voltammetry of Heavy Metals at Nanocrystalline Boron‐Doped Diamond Electrode

Boron‐doped Diamond (BDD) electrode has become one of the important tools for heavy metal detection. By studying some analytical parameters of DPASV method, like deposition time and potential in different electrolyte concentrations (acetate buffer), the conditions for detecting very low metal ion levels (Zn, Cd, Pb, and Cu) could be chosen. Diluted electrolyte (0.01 M buffer) was one of the factors favoring low detection and quantification limits, but its quantification range is short in comparison to more concentrated media. For ?1.7 V deposition potential, the detection of single metal at ppb levels was reached in 60 s deposition time. Understanding different metal‐metal interactions shows the limits to the simultaneous determination of heavy metals at BDD. Quantification was possible for the simultaneous determination of Zn, Cd and Pb despite the overlapping of Zn and Cd peaks. The performance of the BDD was compared with that of another C‐based solid electrode: the glassy carbon electrode (without mercury plating). A lower base line current, wider potential range, higher sensitivity (3 to 5 times higher than GC) and longevity of the material were noticed for the BDD.