Preparation of VPS and PVD coatings for metallographic and TEM investigations

The aim of the first part of the paper is to give some advice for the faultless metallographic preparation of vacuum plasma sprayed coatings. Several coating/substrate combinations using metals, alloys and ceramics were investigated to derive some general rules. The second part deals with a preparation technique for cross-sections- of physical vapour deposition coatings. This technique was optimized for TiN and Ti(C, N) coatings on hardmetals which were examined in an analytical transmission electron microscope.     

有机溶剂法无水氯化镁的制备与表征

Ammonium carnallite was synthesized by hydrated magnesium chloride in salt lake and ammonium chloride solution. Dehydrated ammonium carnallite was dissolved in methanol under low temperature by feeding ammonia, to prepare anhydrous magnesium chloride. The results show that anhydrous magnesium chloride contains magnesium oxide in an amount less than 0.1% by weight, the yield of magnesium chloride was above 99.5%. Ammonium carnallite, ammoniation magnesium chloride and anhydrous magnesium chloride were characterized by thermoanalysis, X-ray powder diffraction and scanning electron microscopy.     

Beiträge zum thermischen Verhalten wasserfreier Phosphate. IX. Darstellung und Kristallstruktur von Cr6(P2O7)4. Ein gemischtvalentes Pyrophosphat mit zwei- und dreiwertigem Chrom

Contributions on the Thermal Behaviour of Anhydrous Phosphates. IX. Synthesis and Crystal Structure of Cr₆(P₂O₇)₄. A Pyrophosphate Containing Di- and Trivalent Chromium Cr₆(P₂O₇)₄ (Cr₂²⁺Cr₄³⁺(P₂O₇)₄) can be obtained reducing CrPO₄ by phosphorus (950°C, 48 h, 100 mg iodine as mineralizer). By means of chemical transport reactions (transport agent iodine; 1050 → 950°C) the compound has been separated from its neighbour phases (Cr₂P₂O₇, CrP₃O₉) and crystallized (greenish, transparent crystals; edge length up to 0.3 mm). The crystal structure of Cr₆(P₂O₇)₄ (Spcgrp.: P-1; z = 1; a = 4.7128(8) Å, b = 12.667(3) Å, c = 7.843(2) Å, α = 89.65(2)°, β = 92.02(2)°, γ = 90.37(2) has been solved and refined from single crystal data (2713 unique reflections, 194 parameter, R = 0.035). Cr²⁺ is surrounded by six oxygen atoms which occupy the corners of an elongated octahedron (4 × d^{Cr? O} ≈? 2.04 Å; 2 × d^{Cr? O} ≈? 2.62 Å). The Cr³⁺ ions are also coordinated octahedraly (1.930 Å ≤ d_{Cr? O} ≤ 2.061 Å). The crystallographically independent pyrophosphate groups show nearly eclipsed conformation. The bridging angles (P? O? P) are 136.5° and 138.9° respectively.     

The oxidative addition of hydrogen sulfide to the electron-rich triple bond: The isolation and characterization of compounds that contain the Re2(μ-H)(μ-SH) cluster unit

The reactions of Re₂X₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) with H₂S in THF afford the dirhenium (III) complexes Re₂(-H)(-SH)X₄(-dppm)₂, the first examples of the oxidative addition of an S-H unit across an electron-rich metal-metal triple bond. The bromide complex Re₂(-H)(-SH)Br₄(-dppm)₂ (C₂H₅)₂O crystallizes in the space group P2₁/n witha=16.631(2) Å,b=15.967(3) Å,c=19.904(2) Å, =92.698(7)°,V=5279(2) ų, andZ=4. The structure which was refined toR=0.053 (R _w=0.070) for 4903 data withI>3.0(I), shows the presence of an edge-shared bioctahedral geometry with a very short Re-Re distance of 2.4566(7) Å. While the hydrogen atoms of the -H and -SH ligands were not located in the X-ray structure determination, their presence is confirmed by IR and¹H NMR spectroscopy.     

Chemical preparation of conductive elastomeric blends: Polypyrrole/EPDM. I. Oxidant particle-size effect

This work describes the preparation of polypyrrole and EPDM rubber blends, PPy/EPDM, by the sorption of pyrrole (vapor phase) in an EPDM matrix containing CuCl₂. We investigated the effect of the oxidant particle-size on the sorption and polymerization equilibrium, electrical conductivity, and mechanical properties of the blends. Independently of the CuCl₂ concentration and polymerization time, the polypyrrole weight fraction in the blend, X_ppy, increases when the oxidant particle-size in changed from 150–250 μm to smaller than 106 μm. For blends containing 50 phr of CuCl₂, obtained following 72 h of exposure to pyrrole, an increase in the Young's Modulus (from 2.2 ± 0.2 to 3.9 ± 0.6 MPa) and an increase in the electrical conductivity (from 10^?9 to 10^?7 S cm^?1) was observed when the oxidant particle-size was decreased. Infrared spectroscopy, thermogravimetric analysis, scanning differential calorimetry, and scanning electron microscopy were used in sample characterization. © 1994 John Wiley & Sons, Inc.     

Reversed Capillary Electrochromatography: Investigation of Peak Symmetry for Eluting Curves of Solutes

Summary A clean method without use of organic solvents has been developed for isolation and high-performance liquid chromatographic (HPLC) determination of oxytetracycline (OTC) and sulphadimidine (SDD) in cow's milk. Isolation is rapid and simple—homogenization with an inorganic acid solution by means of a handy ultrasonic homogenizer, which is easy-to-use and portable, followed by centrifugation. Reversed-phase HPLC was performed on a C₄ column, with 1.25 mmol L⁻¹ succinic acid solution as mobile phase, and identification was by means of a photodiode-array detector. Separation of the analytes was achieved in less than 8 min. Significant linearity was established over the concentration range of 0.1–1.0 μg mL⁻¹ for both target compounds (r>0.99,P<0.01). Average recoveries of OTC and SDD (each spiked at 0.1–1.0 μg mL⁻¹) were ≥88.8, and inter- and intra-assay variability was ≤2.8%. The total time required for analysis of one sample was <20 min. The limits of quantitation of the method (μg mL⁻¹ in milk) were 0.044 for OTC and 0.023 for SDD. No organic solvent was used at any stage of the analysis.     

再谈磷的同素异形体(1)——块体磷的同素异形体

结合最新研究进展，全面介绍了块体状磷的同素异形体——白磷、红磷、黑磷等，包括存在、组成、性质、结构、制备、应用等，同时明确了紫磷、希拖夫磷、灰磷、褐磷等概念，提出了大学本科化学教学的建议。     

一种新型极性脲丙基-C30固定相的制备和性能评价

以3-脲丙基三甲氧基硅烷为偶联剂，制备了一种新型极性脲丙基-C30（TPU-C30）反相色谱固定相。采用扫描电子显微镜、元素分析、红外光谱和热分析等对该固定相进行表征。结果表明，TPU-C30固定相已成功制备，连续制备3次固定相，其元素含量的相对偏差均小于5%，说明该合成工艺重复性良好。以不同极性、位置异构、碱性化合物为溶质探针，以传统的C18色谱柱与C30色谱柱为参比，对制备的固定相的色谱性能进行了研究。研究结果表明，TPU-C30固定相具有不同于传统C18柱、C30柱的选择性和更优的择形性，明显改善了碱性物质的峰形，其具有广阔的应用空间。     

Retention behavior and solvent optimization of organochlorine pesticides in solid-phase extraction

Summary Plots of capacity factor and retention time vs. elution solvent composition were proved to be useful to interpret the retention behavior of Kepone and its metabolites in a reversed-phase solid-phase extraction and to optimize the elution solvent. The percent recovery of Kepone was largely improved when the solvent was optimized. The standard deviations of the results of extractions were also improved upon the optimization of the solvent.     

一种用于大容量逆流色谱制备的立式多层螺旋管行星式离心机

Owing to no complications caused by solid supports, such as adsorptive sample loss and deactivation, tailing of solute peaks, and contamination, countercurrent chromatography (CCC) has been an area of intense research since the first introduction of CCC in 1970,[1] and various apparatus and broad applications have been advanced[2,3]. For these developments, the type-J synchronous planet centrifuge has received considerable attention, which relies not only on its relatively simple mechanic design, but also on its high partition efficiency and short elution time caused by mixing and settling for the efficient chromatographic separations. In the past, however, almost all of type-J centrifuges rotated slowly were disposed horizontally due to the original design and some experiments that gravis plays an important role at a low rotary speed as similar to type-V rotating multilayer helical tube in unit gravity[4-9]. In fact,we discovered that the upright apparatus holds more retention of stationary phase than the horiziontal aparatus when large standard tubings were used as mutilayer coil column and the aparatus was operated under same contions. We report here a new coil planet centrifuge with four upright cylindrical columns for large scale countercurrent chromatographic preparation. The design principle and apparatus of UCCC is as samilar to type-J multilayer coil planet centrifuge. Four uptight cylindrical column holders are symmetrically arranged around the centrifuge axis as similar to the type-J HSCCC with three horizontal multilayer coils connected in series[8] . A series of experiments indicat that upright CCC has many advantages over the horizontal CCC when using a large-bore tube as multilayer coil column for large scale countercurrent chromatographic separation.Upright CCC provide a versatile countercurrent chromatographic method for large-scale preparation from very crude sample. It has good preparative capacity and flexible suitability to various sample and two-phase system.The present apparatus not only can be operated at a high speed as similar as commonly used HSCCC for the system having short settling time and but also can be run at a low speed for the system having relative long settling time. Because of automatical control and seal-free flow through device, the uptight CCC apparatus may be readily scaled up to industrial preparation.