Non‐intrusive reduced‐order modeling for multiphase porous media flows using Smolyak sparse grids

In this article, we describe a non‐intrusive reduction method for porous media multiphase flows using Smolyak sparse grids. This is the first attempt at applying such an non‐intrusive reduced‐order modelling (NIROM) based on Smolyak sparse grids to porous media multiphase flows. The advantage of this NIROM for porous media multiphase flows resides in that its non‐intrusiveness, which means it does not require modifications to the source code of full model. Another novelty is that it uses Smolyak sparse grids to construct a set of hypersurfaces representing the reduced‐porous media multiphase problem. This NIROM is implemented under the framework of an unstructured mesh control volume finite element multiphase model. Numerical examples show that the NIROM accuracy relative to the high‐fidelity model is maintained, whilst the computational cost is reduced by several orders of magnitude. Copyright © 2016 John Wiley & Sons, Ltd.     

Photopolymeritation of Methyl Methacrylate and Styrene by Sulfur Ylides

The photoinitiating ability of some sulfur ylides was studied. Diphenylsulfonium bis (methoxycarbony1)methylide (DPSY) could photoinitiate methyl methacrylate and styrene. A free radical mechanism was confirmed by a kinetic study, the inhibiting effect of benzoquinone, and the copolymer composition. From an analysis of the photodecomposition products it is suggested that the phenyl radical generated from the bond fission between the sulfur atom and the phenyl group participates in the initiation of this free radical polymerization. Methylphenylsulfonium bis (methoxycarbonyl) methylide, as well as DPSY, served as a photoinitiator, but dimethylsulfonium bis (methoxycarbony1)methylide did not. The differences are explained based on UV spectra.     

双金属(Sn/Ni)掺杂多孔硅微球的液相合成与电化学储锂性能

使用廉价的硅铝合金前驱体,通过简单的化学沉积方法制备了新型双金属(Sn/Ni)掺杂多孔硅微球(pSi@SnNi)。pSi@SnNi复合材料的三维多孔结构可以缓冲硅在锂化过程中的巨大体积膨胀,增加储锂活性位点。双金属(Sn/Ni)的掺杂可以提高硅的电子导电性,改进pSi的结构稳定性。由于其独特的组成和微观结构,具有适当Sn/Ni含量的pSi@SnNi复合材料显示了较大的可逆储锂容量(0.1 A·g^-1下为2 651.7 mAh·g^-1)、较高的电化学循环稳定性(1 A·g^-1下400次循环后为1 139 mAh·g^-1)和优异的倍率性能(2.5 A·g^-1下为1 235.8 mAh·g^-1)。     

硼、氮共掺杂多孔碳的制备及其超电容性能

分别以含氮菲咯啉、四硼酸钾和醋酸锌为碳源、活化剂和模板,制备了B、N共掺杂多孔碳(BN-PC),并探究模板质量对BN-PC结构和储电性能的影响。当醋酸锌质量为5g时,所得BN-PC₅中B、N杂原子含量分别为 20.21%、18.29%。电化学测试结果表明,以6 mol·L^-1 KOH为电解液,BN-PC₅电极展现出高的比电容(在0.05 A·g^-1电流密度下为255 F·g^-1)、优异的倍率性能(在20A·g^-1电流密度下为188F·g^-1)和卓越的循环稳定性(在5 A·g^-1的电流密度下循环10 000次比电容保持率为97%)。以3 mol·L^-1 ZnSO₄为电解液,在平均功率密度为56W·kg^-1时,BN-PC₅电容器的能量密度可达27Wh·kg^-1。     

中空纳米二氧化硅复合微球的制备及其对蛋白的亲和分离

利用水热法合成了中空巯基纳米二氧化硅微球(SiO₂-SH), 然后在其表面修饰亚氨基二乙酸基团(-IDA), 形成了中空SiO₂-SH/IDA双功能化纳米微球。利用该纳米微球表面的-SH和-IDA双功能团, 可以更多的吸附溶液中的Ni²⁺, 形成SiO₂-SH/IDA-Ni²⁺复合微球从而可以更好的分离以六聚组氨酸为标签的(His-tagged)蛋白。结果显示制备的样品对分离His-tagged蛋白具有广谱性, 并且具有较好的再生能力。     

多孔碳负载镍纳米颗粒的制备及催化氨硼烷水解制氢

合成了蜂窝状的分级多孔碳,并以多孔碳为载体通过浸渍-化学还原法制备碳载镍(Ni/C)作为催化氨硼烷水解制氢的催化剂。采用XRD、BET、SEM、Raman、TEM等手段对样品进行了表征并研究了Ni/C室温催化性能。结果显示,多孔碳比表面积高达737 m²·g^-1,具有部分石墨化结构;负载的非晶态镍纳米颗粒平均粒径约为10 nm,均匀分布在碳基材。碳载镍对氨硼烷水解反应具有良好的催化活性,镍负载量为30wt%时催化性能最佳,298 K温度下放氢速率达到1 304.67 mL·min^-1·g^-1,活化能为29.1 kJ·mol^-1,并且具备一定的催化稳定性,表明Ni/C可作为一种廉价高效的催化剂应用于催化氨硼烷水解制氢。     

Microengineered PEG Hydrogels: 3D Scaffolds for Guided Cell Growth

Designing three‐dimensional (3D) scaffolds for selective manipulation of cell growth is of high relevance for applications in regenerative medicine. Especially, scaffolds with oriented morphologies bear high potential to guide the restoration of specific tissues. The fabrication of hydrogel scaffolds that support long‐term survival, proliferation, and unidirectional growth of embedded cells is presented here. Parallel channel structures are introduced into the bulk hydrogels by uniaxial freezing, providing stable, and uniform porosity suitable for cell invasion (pore diameters of 5–15 µm). In vitro assessment of the scaffolds with murine fibroblasts (NIH L929) shows a remarkable unidirectional movement along the channels, with the cells traveling several millimeters through the hydrogel.

     

Green ultra‐fast high‐performance liquid chromatographic method using a short narrow‐bore column packed with fully porous sub‐2 μm particles for the simultaneous determination of selected pharmaceuticals as surface water and wastewater pollutants

Fast separations are very desirable in laboratories that analyze large numbers of samples per day or those needing short turn‐around times. Traditional HPLC methods using conventional stationary phases and standard column dimensions require significant amounts of organic solvents and generate large volumes of waste. With growing awareness about the environment, the development of green technologies has been receiving increasing attention. In this work, a very fast green analytical method based on LC‐UV using a short narrow bore column packed with fully porous sub‐2 μm particles has been developed for simultaneous determination of nine pharmaceuticals in wastewater and surface water. The chromatographic separation was optimized in order to achieve short analysis time and good resolution for all analytes in a single run. All analytes could be separated in 1 min with good resolution. Sample preparation was executed by solid phase extraction using Oasis HLB cartridges. The method developed was validated based on parameters such as linearity, precision, accuracy, detection, and quantification limits. The recovery ranged from 70.9 to 92.5% with SDs not higher than 5.4%, except for acetaminophen and sulphanilamide. LODs ranged from 0.6–2.5 μg/L, while the LOQs were in the range 2–8 μg/L.