Characterization of a low concentrator photovoltaics module

Low concentration photovoltaic (LCPV) systems have the potential to reduce the cost per kWh of electricity compared to conventional flat-plate photovoltaics (PV) by up to 50%. The cost-savings are realised by replacing expensive PV cells with relatively cheaper optical components to concentrate incident solar irradiance onto a receiver and by tracking the sun along either 1 axis or 2 axes. A LCPV module consists of three interrelated subsystems, viz., the optical, electrical and the thermal subsystems, which must be considered for optimal module design and performance. Successful integration of these subsystems requires the balancing of cost, performance and reliability. In this study LCPV experimental prototype modules were designed, built and evaluated with respect to optimisation of the three subsystems and overall performance. This paper reports on the optical and electrical evaluation of a prototype LCPV module.     

一种用于土壤非金属养分测试的光纤探头式分光光度计

针对测土配方施肥技术中要求快速、便捷、高效地进行土壤养分测试的需求,文章基于浸入式光纤探头、平场凹面全息光栅、二极管线阵检测器开发了一种光纤探头式分光光度计用于土壤养分中非金属元素的快速、准确测试。基于国家计量检定规程JJG 178—2007对紫外、可见、近红外分光光度计的性能检测方法测试的该仪器的波长最大允许误差与波长重复性、基线平直度、透射比最大允许误差与透射比重复性均达到了国标第Ⅲ级别标准,其最小光谱带宽、噪声与漂移、杂散光基本达到了国标第Ⅳ级别标准。基于该仪器测试的土壤硝态氮、铵态氮、有效磷、有效硫、有效硼、和有机质含量与基于商用的国产单光束和进口双光束分光光度计测试的结果呈极显著的线性相关关系,其回归方程的斜率接近于1,且对比数据之间无显著性差异。因此,该光纤探头式分光光度计可用于土壤非金属养分的快速、准确测试。     

ICP-MS法测定不同采收时间宽叶荨麻中微量元素含量

采用微波消解,ICP-MS法分析不同采收时间宽叶荨麻中18种微量元素Al,Ba,Ca,Co,Cr,Cu,Fe,K,Li,Mg,Mn,Mo,Na,Ni,P,Pb,S和Zn的含量。该方法的相对标准偏差在1.2%～5.3%之间,加标回收率在95.4%～101.2%之间。结果表明宽叶荨麻中K,P,S,Ca,Na含量较高;Fe,Mg,Mn,Zn含量次之;有潜在生理毒性的元素Al,Cr,Pb的含量较低,并且在宽叶荨麻中微量元素呈现明显的季节性动态变化,此结果为进一步研究宽叶荨麻药理药效与微量元素的关系以及更好的开发这一资源提供理论数据。     

基于Crouzeix-Raviart元的界面浸入有限元方法及其收敛性分析

本文对具间断系数的二阶椭圆界面问题提出一种浸入有限元方法(theimmersed finite element method), 即在界面单元上采用依赖于界面的线性多项式空间离散, 而在非界面单元上采用Crouzeix-Raviart非协调元离散. 论证表明, 该方法具有对界面问题解的最优L²-模和H¹-模收敛精度.     

Stress field characteristics of eccentrically loaded aircraft spliced joints

The paper details the stress characteristics in eccentrically loaded aircraft spliced joints. It is shown that the hoop stress (σ_θθ) around each rivet is characterized by two peak values located at θ = (0°, 90°). The magnitude of (σ_θθ) is then reduced to a minimum value between these two peaks. A sharp increase in the axial stress component (σ_xx) along the vertical splice lines occurs in the vicinity of the rivet centerlines followed by a rapid decrease in the areas between the rivets. It is shown that stresses along the first interior rivet row is the most critical. The axial stress (σ_xx) profile along horizontal rivet lines has a “sinusoidal” pattern. It is observed that the transverse stress profile (σ_yy), along the horizontal lines, has different peak and minimum values between the rivets. The magnitude of the peak/minimum values depends upon the line location within the splice region. It is also shown the bending stress component varies significantly and must be accounted for the analysis of the eccentric aircraft joints. Experimental comparisons are made along several lines in the splice region. The numerical model is utilized for analysis of a full frame-bay/splice of aircraft fuselage. The paper provides valuable information that can be utilized by practicing engineers for analysis and design of joints with large number of rivets.     

福建农村剩余劳动力的影响因素及转移趋势——基于超越对数生产函数模型

在新形势下,农村剩余劳动力转移对经济发展和社会稳定具有重要的影响.对福建省的13个农村剩余劳动力转移的影响因素进行数据分析,首先用相关分析确定5个重要因素,再基于逐步回归分析建立超越对数生产函数模型,确定影响农村剩余劳动力转移的2个关键因素:第二产业就业比重和第三产业就业比重,并结合灰色预测的结果,预测2011-2013年农村剩余劳动力转移趋势.最后,结合实际情况,提出针对性的建议.     

对流扩散方程的稳定化流线扩散法最小二乘非协调有限元分析

将最小二乘法和稳定化的流线扩散法相结合,研究了对流扩散方程的非协调有限元格式,用矩形EQ_1~(rot)元和零阶R-T元分别来逼近位移和应力,利用单元本身的特殊性质,证明了离散格式解的存在惟一性,得到了位移H~1-模和应力H(div)-模的最优误差估计.     

A new approach for determination of crustal and trace elements in airborne particulate matter

An ICP-OES procedure was developed for fast and accurate determination of various crustal (Al, Ca, Fe, Mg, Si) and trace elements (Ba, Cu, Mn, Na, K, Sr, Ti, Zn) in airborne particulate matter. The method is based on a preliminary treatment of the aerosol samples with a mixture of nitric acid and hydrogen peroxide at elevated temperature leading to a mineralization of the organic sampling substrate, dissolution of soluble material and homogeneous suspension of the remaining non-soluble fraction. After dilution the derived slurry solutions were measured using ICP-OES. The reproducibility of analysis given as the relative standard deviation (% RSD) varied between 3.2 and 6.8% for bulk constituents such as Al, Ca, Fe, Mg and Si whereas values ranging from 3.5 to 9.1% were obtained for trace metals present with distinctly lower abundance in PM10 (e.g. Ba, Cu, Mn, Sr, Zn). The limits of detection (LOD) calculated as three times the standard deviation (3σ) of the signal derived from filter blank samples ranged from approximately 1?ng?m^?3 (Sr) to 71?ng?m^?3(Ca). The developed procedure was evaluated by comparing the obtained results with the findings derived for the same set of aerosol samples analyzed using a microwave procedure for sample dissolution with subsequent ICP-OES analysis. Finally the developed procedure was applied for the analysis of crustal and trace elements in PM10 samples collected at an urban site (Getreidemarkt, Vienna) and a rural site (Hartberg, Styria), in Austria. The concentrations of the investigated crustal elements varied between some hundred ng?m^?3 and few µg?m^?3 with highest concentrations for Fe and Si, distinctly reduced concentrations ranging from some ng?m^?3 (Sr) to more than hundred ng?m^?3 (K) were found for trace elements. Observed PM10 concentrations were found to be in accordance to literature findings from urban sites in central Europe.     

Ti，C，N在a-Fe基中的合金化效应及对键合性质的影响

基于第一性原理赝势平面波方法研究了合金元素Ti,C,N对a-Fe基电子结构及键合性质的影响,计算了含Ti,C,N的Fe基固溶体的总能量、结合能,分析了态密度、电荷布居数、交叠布居数和电荷密度,从理论上解释了在Fe基中固溶Ti,C,N后其性能改善的原因．结果表明,随着Fe基固溶体中Ti（0-12．5ac％）,C（0—11．11at％）,N（0—11．11at％）含量增加,结合能略有增加;Ti,C,N的固溶使各Fe基固溶体在费米能级处强烈成键,结合能力增强,并且在费米能级附近出现赝能隙,表明固溶体中金属键与共价键共存;随着Ti,C,N含量的增加,C,N分别与Ti,Fe之间的共价键结合强度加强,部分c,N原子会与Ti原子结合形成TiC,TiN颗粒,起到沉积相颗粒强韧化作用．