电动势法测定Cu(Ⅰ)与乙炔生成配合物的热力学函数

乙炔与Cu(I)生成配合物的热力学函数文献报道鲜见,且不同作者的测定结果差异较大。本文用改进的电动势法。对在氯丁橡胶、聚氯乙烯,乙醛等工业过程有重大意义的Cu(I)与乙炔配合物进行测定,得到更合理的结果。     

［Mo_3（μ_3－O）（μ－Cl）_3（μ－O_2CR）_3Cl_3］~－系列三核钼的电化学及热化学性质的研究

用循环伏安法研究了［Ｍｏ_３ＯＣｌ_６（Ｏ_２ＣＲ）_３］－（其中Ｒ＝ＣＨ_３，Ｈ，ＣＨ_２Ｃｌ）系列三核钼簇合物在ＣＨ_３ＣＮ和ＤＭＦ溶剂中的电化学行为，并用差热－热重手段研究了它们的热稳定性和热分解过程的可能机理。结果表明在不同溶剂中它们有相似的二对氧化还原峰，而且在同一溶剂中随着Ｒ基团吸电子能力的增强，相应的第一氧化还原电位值向正向移动。当Ｒ＝ＣＨ_３，Ｈ时，它们的起始分解温度分别为２６５℃和２１０℃，即同样随着Ｒ基团吸电子能力的增强，起始分解温度降低。     

La2O3,Y2O3-Mo次级发射材料研究

采用粉末冶金方法制备了La2O3，Y2O3-Mo次级发射材料，测试了各种材料的次级发射系数。结果表明在钼中加入稀土氧化物可以具有很好的次级发射性能。经过激活处理后，材料的最大次级发射系数均高于2．0，达到了材料使用要求的发射水平。应用扫描电镜(SEM)和光电能谱仪(XPS)研究了稀土元素在烧结体断口和发射前后在试样表面的分布情况。分析结果表明稀土元素易于在晶界处偏聚，且发射后试样表面稀土元素的相对浓度明显高于发射前的浓度。     

催化动力学法测定痕量钼的研究—盐酸联氨—Mo（Ⅵ）—邻菲罗啉—甲苯胺蓝体系

基于盐酸介质中和邻菲罗啉的存在下，钼催化盐酸联氨还原甲苯妥蓝褪色反应，建立了一种高灵敏，高选择性测定痕量钼的新方法。方法的检出限为７．６９×１０＾－７ｇ／Ｌ，线性范围０－０．１μｇ／２５ｍＬ，成功用于水和豆类中钼的测定。     

Energetic and topological analysis of the reaction of Mo and Mo2 with NH3, C2H2, and C2H4 molecules

The Density functional theory has been applied to characterize the structural features of Mo(1,2)-NH(3),-C(2)H(4), and -C(2)H(2) compounds. Coordination modes, geometrical structures, and binding energies have been calculated for several spin multiplets. It has been shown that in contrast to the conserved spin cases (Mo(1,2)-NH(3)), the interaction between Mo (or Mo(2)) and C(2)H(4) (or C(2)H(2)) are the low-spin (Mo-C(2)H(4) and -C(2)H(2)) and high-spin (Mo(2)-C(2)H(4) and -C(2)H(2)) complexes. In the ground state of Mo(1,2)-C(2)H(4) and -C(2)H(2), the metal-center always reacts with the C-C center. The spontaneous formation of the global minima is found to be possible due to the crossing between the potential energy surfaces (ground and excited states with respect to the metallic center). The bonding characterization has been performed using the topological analysis of the Electron Localization Function. It has been shown that the most stable electronic structure for a pi-acceptor ligand correlates with a maximum charge transfer from the metal center to the C-C bond of the unsaturated hydrocarbons, resulting in the formation of two new basins located on the carbon atoms (away from hydrogen atoms) and the reduction of the number of attractors of the C-C basin. The interaction between Mo(1,2) and C(2)H(4) (or C(2)H(2)) should be considered as a chemical reaction, which causes the multiplicity change. Contrarily, there is no charge transfer between Mo(1,2) and NH(3), and the partners are bound by an electrostatic interaction.     

新型的含硫族元素碳硼烷配体的三(3，5-二甲基-1-吡唑)硼氢钼配合物的合成和分子结构(英)

三齿单核三(3，5-二甲基-1-吡唑)硼氢钼配合物Tp^*Mo(O)Cl₂ (1)(Tp^*=三(3，5-二甲基-1-吡唑)硼氢HB(C₃H(Me₂)N₂)₃)与含硫族元素碳硼烷的锂盐[(THF)₂LiE₂C₂B₁₀H₁₀(THF)]<     

V2O5-MoO3-SiO2表面复合氧化物催化剂的制备与表征

采用表面改性法制备了V2O5-SiO2,MoO3-SiO2,V2O5-MoO3-SiO2复合氧化物催化剂,并用TPR和IR技术研究了催化剂的表面结构及V=O,M0=O的活性,同时用化学吸附IR技术研究了催化剂样品对异丁烷的化学吸附性能.实验结果表明:这些复合氧化物催化剂对异丁烷都有较高的化学吸附能力;SiO2能缓解表面Lewis碱位V=O和Mo=O的氧化能力,有利于选择氧化.     

EFFECT OF MOLYBDENUM PROMOTER ON THE Cu-Co BASED CATALYSTS

The synthesis of mixed alcohols (C1-C5) from syngas has been studied at 6. 0 MPa over modified Co/CuLaZr catalysts. The molybdenum addition enhanced greatly the activity and the selectivity to alcohols. The improvement of hydrogenation capacity of the system via a reversible spillover effect of hydrogen could explain this effect, together with a great capacity of CO insertion, illustrated by the effect of C2H4 addition as a probe to syngas. Under our experimental conditions, a mixed alcohol production of 147.1g/kg. cat/h containing a proportion of 33. 1% of higher alcohols (C2 OH) was obtained with a selectivity to ROH of 52. 8%.     

不同环大小分子筛对钼基分子筛催化剂上甲烷无氧芳构化反应的影响

 钼基分子筛催化剂，由于不同分子筛的孔道大小及孔道形状不同\r\n，对甲烷芳构化反应表现出不同的催化性能．具有8元环孔道结构的小\r\n孔ERS－7分子筛没有催化活性，说明甲烷的芳构化反应离不开分子筛孔\r\n道的择形作用，较小的孔道中不能生成苯等芳烃．具有10元环孔道结构\r\n的ZSM－5，ZSM－11和ZRP－1三种分子筛具有较好的催化性能，但由于\r\n其孔道大小及孔道形状的差别在催化行为上表现出一定的差异．具有1\r\n0元环和12元环孔道结构的MCM－22分子筛，尤其对苯等轻芳烃而言，催\r\n化性能最佳．具有12元环孔道结构的JQX－1以及中孔分子筛SBA－15，\r\n虽然具有一定的催化性能，但活性较低．研究结果表明，孔道大小与苯\r\n分子动态直径相近或孔道稍大的分子筛是催化甲烷芳构化反应的良好载\r\n体，孔道过大或过小都不利于苯和萘等芳烃的生成．     

2,5-Dimethylthiophene coordination to three metal centers in the complexes (η4, S-μ3-2,5-Me2T)(IrCp*) [M(CO)2Cp]2 where MMo or W

The 2,5-dimethylthiophene (2,5-Me₂T) ligand in the isomers Cp*Ir(η⁴-2,5-Me₂T) (1) and Cp*Ir(C,S-2,5-Me₂T) (2) is activated to react with the dimers Cp(CO)₂M?M(CO)₂Cp[M?Mo (3), W (4)] to give complexes (5,6) in which the thiophene is coordinated to three metals. Oxidation of 5 with Cp₂Fe⁺ removes the Mo dimer to give Cp*Ir(η⁵-2,5-Me₂T)²⁺. Reaction of 5 with CO displaces the Mo as [CpMo(CO)₃]₂ to give Cp*Ir(CO)(C,S-2,5-Me₂T) (7). Ultraviolet photolysis of 1 provides a convenient route to the ring-opened isomer 2. Despite the remarkable nature of the thiophene coordination in 5 and 6, its reactivity does not suggest new pathways that would lead to the hydrodesulfurization of thiophenes.