Conformation and internal mobility of 5H-dibenzo[a,d]cycloheptene derivatives in solution. Conformational analysis of highly flexible structures,part II

Summary The conformational possibilities of 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cycloheptene (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (2), and 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (3) are analysed using empirical force field methods. Minimum energy conformations, interconversion pathways, interconversion graphs and interconversion energies are examined in view of the analysis of conformer equilibria of1,2, or3 in solution. In addition, some basic requirements of the analysis of fast interconverting conformers using the lanthanide induced shift method are discussed.

---

Konformation und interne Beweglichkeit von 5H-Dibenzo[a,d]cyclohepten Derivaten in Lösung. Konformationsanalyse hochflexibler Strukturen, Teil 2

Zusammenfassung Die konformativen Möglichkeiten von 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cyclohepten (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (2) und 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (3) wurden mit Hilfe empirischer Kraftfeldmethoden analysiert. Jene Konformationen, die einem energetischen Minimum entsprechen, sowie Interkonversionswege, Interkonversionsgraphen und Interkonversionsenergien wurden in Hinblick auf die Analyse der Konformerengleichgewichte von1,2 oder3 in Lösung untersucht. Weiters werden noch einige grundlegende Voraussetzungen für die Analyse von sich schnell ineinander umwandelnden Konformeren mittels der Lanthaniden-induzierten Verschiebungsmethode besprochen.

     

(Ba, Sr)TiO3纳米棒的反相微乳法制备与表征

在氢氧化钡和氢氧化锶水溶液/Triton X-100/环己烷/正己醇四元W/O型反相微乳液中制备了钛酸锶钡纳米棒, 研究了ω₀值(水与表面活性剂Triton X-100的物质的量之比)、反应物浓度、陈化时间对产品形貌和尺寸的影响, 用TEM, SAED, SEM, EDS和XRD等技术对产品进行了表征. 结果表明, 所得Ba_0.7Sr_0.3TiO₃纳米棒长约500～1200 nm、直径约为50～120 nm; 具有立方相单晶结构. 产品中钡、锶、钛的物质的量之比约为0.7∶0.3∶1.     

Study on the nature of interaction of BrCl with HF,H2O,and NH3

By counterpoise‐corrected optimization method, the interactions of BrCl with the first‐row hydrides (HF, H₂O, NH₃) have been investigated at the MP2/6–311++G(3d,3p) level. To understand that the X? Br‐type (X = F, O, N) structure is more stable than the corresponding hydrogen‐bonded structure in these complexes, the electronic properties were also investigated. Symmetry‐adapted perturbation theory (SAPT) analysis has been carried out to understand the nature of the weak hydrogen bond and X? Br‐type interactions. On the other hand, for the weak hydrogen‐bonded complexes and the X? Br‐type complexes charges transfer is well correlated with the total induction energies. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

沉淀法高效制备聚多巴胺纳米粒子

为得到分散性和稳定性较好的聚多巴胺纳米粒子,利用“沉淀-再分散法”高效制备了聚多巴胺纳米粒子水分散液。 首先利用溶液氧化法制备了分散在水/乙醇中的聚多巴胺纳米粒子,然后向分散液中加入丙酮使聚多巴胺纳米粒子絮凝。 收集沉降物,用丙酮冲洗并干燥后,加水重新分散得到纯化的聚多巴胺纳米粒子水分散液。 丙酮沉淀法得到的聚多巴胺纳米粒子形貌规整,分散性好,粒径分布在250 nm左右,在水中具有良好的储存稳定性和光热性能,与传统的超速离心提纯法相比,产率可提高57.4%。 此方法为其之后在药物载体及光热治疗等方面的应用研究提供了便利。     

Parameter identification of thermophilic anaerobic degradation of valerate

The considered mathematical model of the decomposition of valerate presents three unknown kinetic parameters, two unknown stoichiometric coefficients, and three unknown initial concentrations for biomass. Applying a structural identifiability study, we concluded that it is necessary to perform simultaneous batch experiments with differenitial conditions for estimating these parameters. Four simultaneous batch experiments were conducted at 55°C, characterized by four different initial acetate concentrations. Product inhibition of valerate degradation by acetate was considered. Practical identification was done optimizing the sum of the multiple determination coefficients for all measured state viariables and for all experiments simultaneously. The estimated values of kinetic parameters and stoichiometric coefficients were characterized by the parameter correlation matrix, the confidence interval, and the student's t-test at 9% significance level with positive results except for the saturation constant, for which more eperiments for improving its identifiability should be conducted. In this article, we discussekinetic parameter estimation methods.     

二水草酸锌脱水的热分解动力学研究

提出一种多升温速率-等温法确定机理函数g(α)的新方法;并用迭代的等转化率法求出较为可靠的活化能Ea;在Ea和g(α)的基础上计算出指前因子A.用该法对二水草酸锌（ZnC2O4•2H2O）脱水反应的热分解动力学三因子进行了求算,得出Ea为87.22 kJ•mol－1, A为4.2120×108～7.2328×108 s－1;以及随机成核和随后生长型机理函数Am（Avrami-Erofeer）,其积分形式g(α)=[－ln(1－α)] 1/m和微分形式f(α)=m(1－α)•[－ln(1－α)](1－1/m),调节因子m=1.85～2.00.     

催化反应—导数示波极谱法测定痕量钨

在盐酸介质中，痕量钨对钛（Ⅲ）还原金莲花橙的缓慢反应有强烈催化作用，在ＮａＯＨ介质莲花橙Ｏ于－０．５０Ｖｖｓ．ＳＣＥ产生一灵敏的导数示波极谱波。据此，建立了一定检测限和测定范围分别为０．８ｎｇ／ｍＬ和１．６－８０ｍｇ／ｍＬＷ的催化反应－示波极谱新方法，用于钢和矿样中钨的测定，获得满意结果。     

盐酸吡格列酮的合成新方法研究

报道了治疗糖尿病药物盐酸吡格列酮的合成新方法.在六氢吡啶作用下,对羟基苯甲醛和2,4-噻唑烷二酮缩合生成5-[(4-羟苯基)亚甲基]-2,4-噻唑烷二酮,经钯炭催化氢化还原生成5-[(4-羟苯基)甲基]-2,4-噻唑烷二酮,再和氢氧化钾反应生成相应的钾盐,然后与5-乙基-2-羟乙基吡啶和甲基磺酰氯反应得到的磺酸酯作用生成吡格列酮,最后用盐酸酸化得到其盐酸盐.产品结构经1H NMR和IR确证.     

层状正极材料LiNi1/6Co1/6Mn2/3O2的制备及电池性能

0引言为解决目前日益严重的汽车尾气排放对城市空气造成污染问题,作为绿色能源的锂离子电池已成为动力电池的首选对象。国际上,高容量、大功率锂离子电池早于1995年已开始研制。1996年,我国天津电源研究所也进行了大容量锂离子蓄电池及电池组的探索[1]。目前,锂离子电池的正极材料是制约其大规模推广应用的关键。现研究的正极材料主要包括具有层状结构的LiCoO2,LiN iO2和LiM nO2及具有尖晶石结构的LiM n2O4等。其中LiC oO2作为目前唯一已经商业化的正极材料具有理论容量高、可循环性能好等优点,但因Co资源的相对缺乏导致其价格高昂。…