低渗温热腹腔灌注化疗治疗恶性腹腔积液的临床研究

目的 评价低渗温热腹腔灌注化疗治疗恶性腹腔积液的疗效及不良反应。方法 行腹腔穿刺置单腔中心静脉导管,外接引流袋,记录腹水引流量,当日排放腹水1 500ml 后,予加热至43~45℃注射用双蒸馏水1 000ml 行腹腔灌注,次日重复放液1 500ml,再予加热至43~45℃注射用双蒸馏水1 000ml 行腹腔灌注,并于灌注后腹腔注入顺铂60mg、氟尿嘧啶500mg 并封管,治疗期间常规给予简单水化、对症止吐等治疗。结果 31 例恶性腹腔积液患者共完成低渗温热腹腔灌注化疗42 周期,完全缓解7例,部分缓解15,稳定5 例,进展4 例,完全缓解+ 部分缓解占70.97%。中位进展时间（TTP）3.6个月（2～9 个月）, 中位生存期（MST）5.6 个月。毒副反应以消化道反应为主。结论 低渗温热腹腔灌注化疗治疗恶性腹腔积,在延长患者的生存期、提高生活质量方面效果较好,临床上可推荐应用。     

meso‐Ester and Carboxylic Acid Substituted BODIPYs with Far‐Red and Near‐Infrared Emission for Bioimaging Applications

A series of meso‐ester‐substituted BODIPY derivatives 1–6 are synthesized and characterized. In particular, dyes functionalized with oligo(ethylene glycol) ether styryl or naphthalene vinylene groups at the α positions of the BODIPY core ( 3 – 6 ) become partially soluble in water, and their absorptions and emissions are located in the far‐red or near‐infrared region. Three synthetic approaches are attempted to access the meso‐carboxylic acid (COOH)‐substituted BODIPYs 7 and 8 from the meso‐ester‐substituted BODIPYs. Two feasible synthetic routes are developed successfully, including one short route with only three steps. The meso‐COOH‐substituted BODIPY 7 is completely soluble in pure water, and its fluorescence maximum reaches around 650 nm with a fluorescence quantum yield of up to 15 %. Time‐dependent density functional theory calculations are conducted to understand the structure–optical properties relationship, and it is revealed that the Stokes shift is dependent mainly on the geometric change from the ground state to the first excited singlet state. Furthermore, cell staining tests demonstrate that the meso‐ester‐substituted BODIPYs ( 1 and 3 – 6 ) and one of the meso‐COOH‐substituted BODIPYs ( 8 ) are very membrane‐permeable. These features make these meso‐ester‐ and meso‐COOH‐substituted BODIPY dyes attractive for bioimaging and biolabeling applications in living cells.     

Water permeability in MXene membranes: Process matters

Recent studies have shown impressive transport behaviors of water and ions within lamellar MXene membranes,which endows great promise in developing advanced separation application based high performance MXene membranes.However,most of the researches focused on modification of MXene nanoflakes and optimizing interlayer distance,leaving the impact of membrane fabrication process marginal.In this work,we studied the water flux of membranes made by vacuum filtration using delaminated MXene nanoflakes as the building-blocks.Our results show that the water permeability is extremely sensitive to the process,especially at the drying process,loading and deposit rate of nanoflakes(the feeding concentration).We find that the voids from less ordered stack rather than in-plane defects and interlayer galleries contribute to the large water permeability.The voids can be effectively avoided via deposition of MXene nanoflakes at a slow rate.Manipulating the stack of MXene nanoflakes during vacuum filtration and drying are critical for development of MXene membranes with desired performance for water permeation.     

PEFC catalyst layers: Effect of support microstructure on both distributions of Pt and ionomer and cell performance and durability

In order to improve the performance and durability of polymer electrolyte fuel cells (PEFCs), various improvements in the microstructures of cathode catalyst layers (CLs) were initiated in the early 1990s. More recent advances in CL materials are highlighted, including carbon supports for improved accessibility of Pt nanoparticles (NPs), adsorption of ionomer on the Pt surface, high-oxygen-permeability ionomers, corrosion resistance of mesoporous and microporous carbons, and conductive ceramic supports with a fused-aggregate network structure. These approaches are summarized as stepwise improvements. The influences of the support structure on the distribution of Pt NPs and ionomer are reviewed, as well as their effects on performance and durability. These approaches for carbon supports are extended to conductive ceramic supports and the unique advantages are discussed.     

CO2-水-页岩相互作用的研究现状及展望

简要综述了CO2、水和页岩间矿物的相互作用,分析了CO2注入到地下进入页岩层后,地下含水层pH值的变化,并根据页岩层的矿物学组成分为黏土矿物和脆性矿物,较为详细地描述了CO2与黏土矿物和脆性矿物之间发生的地球化学反应,概述了此反应对页岩层孔隙度和渗透率的影响。同时,也讨论了CO2增强页岩气开采的现实问题及发展趋势,为今后的研究提供了参考。     

Systematic Research and Evaluation Models of Nanomotors for Cancer Combined Therapy

Limited tumor permeability of therapeutic agents is a great challenge faced by current cancer therapy methods. Herein, a kind of near infrared light (NIR)‐driven nanomotor with autonomous movement, targeted ability, hierarchical porous structure, multi‐drugs for cancer chemo/photothermal therapy is designed, prepared and characterized. Further, we establish a method to study the interaction between nanomotors and cells, along with their tumor permeability mechanism, including 2D cellular models, 3D multicellular tumor spheroids and in vivo models. In vivo tumor elimination results verify that the movement behaviour of the nanomotors can greatly facilitate them to eliminate tumor through multiple therapeutic methods. This work tries to establish systematic research and evaluation models, providing strategies to understand the relationship between motion behaviour and tumor permeation efficiency of nanomotors in depth.     

High diffusion barrier and piezoelectric nanocomposites based on polyvinylidene fluoride‐trifluoroethylene copolymer and hydrophobized clay

Nanocomposites based on polyvinylidene fluoride–trifluoroethylene copolymer and up to 4 vol % of hydrophobized clay nanoparticles are investigated. The structure, piezoelectric properties, and oxygen permeability of solvent cast films are analyzed before and after annealing above the Curie temperature of the polymer. Exfoliation of the clay takes place at concentrations up to 1 vol %, beyond which it rapidly drops and is absent at a concentration of 4 vol %. The presence of clay does not change the crystallinity of the polymer, but leads to a threefold decrease of the oxygen permeability at a concentration of 0.5 vol %. Annealing at 130 °C increases the crystallinity, the proportion of β phase up to 94%, and the piezoelectric coefficient by 20–40% at clay fractions below 1 vol %. Annealing also leads to a remarkable 3‐ to 10‐fold decrease of O₂ permeability and to intriguing changes of the activation energy for O₂ transport, which decreases from 56 kJ/mol for the as‐cast polymer to below 10 kJ/mol for the polymer and exfoliated composite. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1828–1836     

Triple negative permeability band in plasmon-hybridized cut-wire-pair metamaterials

We expand the picture of plasmon hybridization in metamagnetic structure via numerically studying the electromagnetic coupling in the metallic cut-wire-pair super cells. It is shown that a triple negative permeability band can be achieved by systematically controlling the plasmon hybridization in such the structure. The corresponding transmission properties as well as the electromagnetic responses of the plasmon-hybridized structures were presented by using the finite integration technique simulations. Our results would reveal a promising design to obtain the multiple negative refractions based on the combination of hybridized cut-wire-pairs and continuous wires.     

色散磁导率对异向介质中的调制不稳定性的影响

基于Drude模型研究了异向介质的色散磁导率对调制不稳定性的影响. 结果表明，在反常色散情形，赝五阶非线性在异向介质的负折射区中增大了调制频谱的范围及增益值，这与常规正折射介质中出现的现象正好相反；自陡峭效应在异向介质中有可能为负值，但无论正负，也无论在正折射区还是负折射区，它都抑制调制不稳定性的产生；二阶非线性色散效应在正、负折射区中分别促进和抑制调制不稳定性的产生. 在正常色散情形，由于二阶非线性色散效应的作用，使本来在常规正折射介质中不可能出现的调制不稳定性现象也能出现，这一特性为在正常色散区形成孤