甲烷部分氧化制合成气 Ⅰ．甲烷在过渡金属上的活化

文中用同位素交换（Ｄ_２─ＣＨ_４）反应来测量四种过渡金属负载型催化剂对甲烷的活化能力，并与Ｓｖｅｎｓｓｏｎ等从头算的计算结果作了比较，表明最有效活化甲烷分子的Ｃ─Ｈ键的金属是铑（Ｒｈ）．文中还测定了在甲烷部分氧化制合成气反应中，四个不同催化剂的催化活性与选择性，并与它们对甲烷的活化能力进行对比，可以看出甲烷部分氧化反应中，反应活性高的催化剂有效地活化甲烷，断裂Ｃ─Ｈ键，而且氘代甲烷产物分布以形成ＣＤ_４产物为主要成份．     

洛阳市郊区叶菜中重金属含量抽样分析及评价

为了研究洛阳市郊区蔬菜中重金属污染状况,采用火焰原子吸收法对郊区李楼乡和孙旗屯乡抽取的叶菜样品中重金属Cu、Zn、Pb、Cd含量进行了测定。结果表明,8个蔬菜样品中Cu含量在0.393 9～0.970 7 mg/kg之间,Zn含量在1.395 0～10.080 0 mg/kg之间,均未超过国家蔬菜卫生限量标准;Pb含量在0.100 0～0.248 6 mg/kg之间,其中有3个样品Pb含量超出国家蔬菜卫生限量标准;Cd含量有5个样品未检出,其余3个样品也不超国标。经用单因子和综合因子污染指数评价,洛阳市郊区叶菜类蔬菜重金属污染大部分已处于警戒级到轻度污染,因此,应加强蔬菜中重金属污染的预防与治理工作。     

A comparative study on the thermal decomposition of some transition metal carboxylates

Thermal decomposition of transition metal malonates, MCH₂C₂O₄?xH₂O and transition metal succinates, M(CH₂)₂C₂O₄?xH₂O (M=Mn, Fe, Co, Ni, Cu, Zn) has been studied employing TG, DTG, DTA, XRD, SEM, IR and Mössbauer spectroscopic techniques. After dehydration, the anhydrous metal malonates and succinates decompose directly to their respective metal oxides in the temperature ranges 310–400 and 400–525°C, respectively. The oxides obtained have been found to be nanosized. The thermal stability of succinates have been found to be higher than that of the respective malonates.     

粘土矿物的结构特征及其应用研究

阐述了贮量巨大、用途广泛的粘土矿物，其充分开发应用的关键，在于根据其结构特征，并通过适当的物理、化学方法加以改造、以适应各种不同工业应用的要求。并以我们对粘土矿物进行活化、改性、层间插入及其工业应用产品开发的初步研究成果，阐明利用粘土硅酸盐多层次结构的可变性，开拓新的应用性能的可能性及粘土矿物充分开发应用的途径。     

自动回流萃取-MPT全谱仪测定航空润滑油中磨损金属的含量

将萃取与回流相结合, 建立了一种处理航空润滑油中磨损金属的新方法, 并用MPT全谱仪对磨损金属含量进行了同时检测. 该方法基本上实现了样品处理的全自动化,克服了常用方法的部分缺点, 对Zn, Cd, Cu, Fe和Pb的检出限(3σ)分别为0.084, 0.043, 0.022, 0.052和0.064 μg/g; 相对标准偏差均小于5%(n=5); 回收率为94.5%~107.4%. 对3个润滑油样品的检测结果令人满意.     

纳米SiO2的表面处理及其在聚合物基纳米复合材料中的应用进展

简要介绍了纳米二氧化硅(SiO2)粒子的制备方法、结构和特性,对近年来国内外纳米SiO2的表面处理方法及聚合物/SiO2纳米复合材料的制备方法进行了阐述,并针对不同改性方法和制备方法的特点加以分析比较;讨论了SiO2粒子的分散机理和增强机理,并对未来的研究内容及方向提出展望。     

Sm2Fe17合金的氢化-歧化过程演化

通过X射线衍射(XRD)、扫描电镜(SEM)和能谱分析(EDX)等手段重点研究了Sm2Fe17合金在氢化-歧化过程中的相组成、相的变化以及微观结构的演化规律。研究表明：在0．1MPa的H2气氛下，Sm2Fe17合金首先吸氢；400℃时合金出现部分脱氢现象；在T≥500℃逐渐开始歧化为SmHx和α—Fe，同时生成了大量的微晶或非晶组织；随着温度的升高，合金中的微晶非晶逐渐晶化，750℃时晶化完全，晶粒长大至20～100nm。通过对Sm2Fe17合金的氢化一歧化过程研究，建立了该过程的微观结构变化规律的物理模型。     

Adsorption Equilibrium and Kinetics of Egg-White Proteins on Immobilized Metal Ion Affinity Gels for Designing Fractionation

Designing an Immobilized Metal ion Affinity (IMA) chromatographic process on large scale demands a thorough understanding to be developed regarding the adsorption behaviour of proteins on metal loaded IMA (IMA-M(II)) gels and the characteristic adsorption parameters to be evaluated. This research investigation illustrates the significance of these aspects for the proposed fractionation of chicken egg-white proteins on these gels. Consequently, a systematic investigation of the adsorption characteristics of three chicken egg-white proteins viz., ovalbumin, conalbumin and lysozyme on Cu(II) and Ni(II) loaded IMA gels, iminodiacetate (IDA) and tris(2-aminoethyl)amine (TREN), has been undertaken. These gels differ in their selectivity towards the proteins of interest under the identical sets of experimental conditions. While TREN-Ni(II) was selective only for lysozyme, IDA-Cu(II), IDA-Ni(II) and TREN-Cu(II) showed varying affinities for all the three proteins. The equilibrium and kinetic data were analysed using various theoretical models and adsorption parameters were quantified. On the basis of these investigations, various strategies have been proposed for the efficient large-scale fractionation of chicken egg-white proteins on these gels.     

Hydrothermal Synthesis and Crystal Structure of a Highly Reduced Mixed Molybdenum-vanadium Polyoxometalate with Phosphorus-centered [Ni(phen)3]2H2·[PmoⅤ4MoⅥ4VⅣ6M2M44]5-·4H2O(M=0.78MoⅤ+0.22VⅣ)

Polyoxometalates(POMs0) containing Keggin moieties exhibit a wide variety of compositions and have considerable structrral versatility as well as important magnetic, optical,and catalytic proper-ties[1-6].     

Hydrothermal synthesis of potassium molybdenum oxide bronzes: structure-inheriting solid-state route to blue bronze and dissolution/deposition route to red bronze

The hydrothermal syntheses of the alkali metal molybdenum bronzes from starting solids (H_xMoO₃) with structural affinities to the desired products were investigated. Single-phase potassium blue and red bronzes were prepared by the hydrothermal treatments at around 430 K, and characterized by powder X-ray diffraction, IR spectroscopy, and SEM. The formation processes of these two bronzes during the hydrothermal treatments were found to differ. The blue bronze was formed by a structure-inheriting solid-state route from H_xMoO₃ with x<0.3, whereas the red bronze was formed for x>0.3 through a solution dissolution/deposition route via the formation of MoO₃+MoO₂.