X-ray spectroscopic study of graphite fluoride (C2F) n intercalated with benzene

Samples of intercalated graphite fluoride of the C₂F·zR type (R is C₆H₆) before and after heating to 150 °C in a spectrometer vacuum chamber were studied by X-ray fluorescence spectroscopy. The C-Kα differential spectra of the samples mainly characterizes the electron state of carbon atoms in the benzene molecule inside the C₂F matrix. The differential spectrum is distinct from the spectrum of solid benzene by additional maxima, which indicate the interaction between the benzene molecules and the graphite fluoride matrix. Comparative analysis of the spectrum of the heated sample and those of graphite and graphite fluoride (CF) _n suggests that the layers of the C₂F matrix contain considerable regions of both completely fluorinated and graphite-like regions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 705–708, April, 2000.     

Diffraction and XPS studies of Cu complexes of intercalated compounds of α-zirconium phosphate. I: Derivation of structural models from powder diffraction data

Reasonable structural models are proposed for the Cu complexes of two intercalated compounds of -Zr(HPO₄)₂·H₂O (-ZrP): one with 1,10-phenanthroline (A) and the other with 2,2-bipyridyl (B). The models are derived from considerations of the unit-cell geometry changes undergone by -ZrP upon insertion of, first, the organic molecules and then copper, in accordance with a set of general criteria of structural analysis called the comparison method.     

Doping of fullerite with molecular oxygen at low temperature and pressure

Two methods are described for doping of fullerite C₆₀ with molecular oxygen at a pressure of ∼104 Pa and at temperature 20–30 °C. It was found by mass spectrometry using oxygen ¹⁸O as dopant that a portion of molecular oxygen absorbed by the pre-decontaminated fullerite (first method) is removed as CO and CO₂ at the heating temperature ≤200 °C. Doping during fullerite precipitation from the liquid phase (second method) makes it possible to prepare samples with the oxygen content ≥1.2 at.%. The fullerite doped with oxygen to this level is diamagnetic. The paramagnetic properties of an O₂ molecule disappear when O₂ is incorporated into the fullerene lattice. This is interpreted on the basis of quantum chemical calculations as a sequence of equilibrium formation of the adduct C₆₀O₂. Calculations showed that the subsequent chemical transformation of C₆₀O₂ resulting in the O-O bond cleavage is energetically favorable, enabling prerequisites for the formation of products of incomplete (CO) and deep (CO₂) oxidation of fullerene under mild conditions. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 662–671, April, 2006     

Controlled‐release systems based on the intercalation of polymeric metribuzin onto montmorillonite

A series of polymer–clay composites carrying metribuzin as herbicide moieties were prepared. Linear copolymers containing metribuzin via an imide linkage were prepared by the free‐radical polymerization of metribuzin monomer (N,N‐diacryloyl metribuzin) with different comonomers. The intercalation of the copolymers onto montmorillonite through a cationic exchange process was carried out and yielded metribuzin composite products. The prepared materials were characterized with a wide variety of analytical techniques, including gel permeation chromatography, NMR, IR, elemental microanalysis, gravimetric analysis (calcination), and swelling measurements. The release rates for the prepared materials were investigated in media of different pHs with an ultraviolet spectrophotometer. Also, these compounds were studied for the control of herb growth. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2513–2525, 2002     

Preparation and characterization of poly(ethyl acrylate)/bentonite nanocomposites by in situ emulsion polymerization

Transparent poly(ethyl acrylate) (PEA)/bentonite nanocomposites containing intercalated–exfoliated combinatory structures of clay were synthesized by in situ emulsion polymerizations in aqueous dispersions containing bentonite. The samples for characterization were prepared through direct‐forming films of the resulting emulsions without coagulation and separation. An examination with X‐ray diffraction and transmission electron microscopy showed that intercalated and exfoliated structures of clay coexisted in the PEA/bentonite nanocomposites. The measurements of mechanical properties showed that PEA properties were greatly improved, with the tensile strength and modulus increasing from 0.65 and 0.24 to 11.16 and 88.41 MPa, respectively. Dynamic mechanical analysis revealed a very marked improvement of the storage modulus above the glass‐transition temperature. In addition, because of the uniform dispersion of silicate layers in the PEA matrix, the barrier properties of the materials were dramatically improved. The permeability coefficient of water vapor decreased from 30.8 × 10^?6 to 8.3 × 10^?6 g cm/cm² s cmHg. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1706–1711, 2002     

Ni-Ti Intercalated and Supported Bentonite for Selective Hydrogenation of Cinnamaldehyde

Ni-Ti intercalated bentonite catalysts (Ni-Ti-bentonite) and Ni-TiO₂ supported bentonite catalysts (Ni-TiO₂/bentonite) were prepared, and the effects of Ni-Ti supported and intercalated bentonite on the selective hydrogenation of cinnamaldehyde were investigated. Ni-Ti intercalated bentonite enhanced the Brønsted acid sites strength, decreased the acid amount and Lewis's acid sites strength, which inhibited the activation of the C=O bond and contributed to selective hydrogenation of the C=C bond. When Ni-TiO₂ was supported on bentonite, the acid amount and Lewis's acid strength of the catalyst increased, providing additional adsorption sites and increased the acetals byproducts. Due to the higher surface area, mesoporous volume, and suitable acidity, compared with Ni-TiO₂/bentonite in methanol solvent, 2 MPa, 120 °C for 1 h, Ni-Ti-bentonite exhibited a higher cinnamaldehyde (CAL) conversion of 98.8 %, as well as a higher hydrocinnamaldehyde (HCAL) selectivity of 95 %, and no acetals were found in the product.     

Impact of the clay organic modifier on the morphology of polymer–clay nanocomposites prepared by in situ free‐radical polymerization in emulsion

Poly(styrene‐co‐butyl acrylate) copolymers were prepared by free‐radical random copolymerization of styrene and butyl acrylate in emulsion in the presence of 10% of surface‐modified sodium montmorillonite (Na‐MMT). The objective of this work was to evaluate the impact of the clay organic modifier in terms of its chemical structure, its degree of interaction within the clay galleries surface, and its ability to copolymerize with monomers, on the morphology and properties of the final nanocomposite prepared. Na‐MMT was modified using different organic modifiers, namely: sodium 1‐allyloxy‐2‐hydroxypropyl (Cops), 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS), N‐isopropylacrylamide (NIPA), and sodium 11‐methacryloyloxy‐undecan‐1‐yl sulfate (MET), respectively. The morphology and properties of the nanocomposites obtained were found to be dependant on the clay organic modifier. X‐ray diffraction (XRD) and transmission electron microscopy indicated that, nanocomposites at 10% clay loading with Cops‐, NIPA‐, and MET‐modified clays, yielded intercalated to partially exfoliated structures, whereas AMPS‐modified clay gave a nanocomposite with a fully exfoliated structure. All polymer–clay nanocomposites were found to be more thermally stable than neat poly(S‐co‐BA) as were determined by TGA. However, nanocomposites with intercalated structures exhibited greater thermal stability relative to fully exfoliated ones. Furthermore, nanocomposites with exfoliated structures exhibited higher storage moduli (G^I) than partially exfoliated once, whereas intercalated structure showed the lowest G^I values. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3619–3628, 2008     

Copper(II) complex intercalated graphene oxide nanocomposites as versatile,reusable catalysts for click reaction

In this work, we report the efficient, high stable copper(II) complexes intercalated graphene oxide (GO) used as green catalysts for copper(II) complex mediated click reaction. Copper(II) Bis(2,2′-bipyridine) [Cu^II (bpy)₂] (C1) and Copper(II) Bis(1,10-phenanthroline) [Cu^II (phen)₂] (C2) have synthesized for the intercalation of corresponding nanocomposites with GO, [GO@Cu^II (bpy)₂] (GO-C1) and [GO@Cu^II (phen)₂] (GO-C2). The noncovalent interaction of complexes supported on the surface of the GO nanosheets proves as an evident active site to facilitate the enhanced catalytic activity of copper-catalyzed alkyne azide cycloaddition (Cu^IIAAC) reaction for the isolation of 1,4-disubstituted-1,2,3-triazoles as click products in shorter reaction time with 80%–91% yield (five examples). The X-ray diffraction (XRD) pattern of these composites shows the enhanced interlayers d-spacing range of 1.01–1.12 nm due to the intercalation of copper(II) complexes in between the GO basal planes and characterized by X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), Raman, UV, scanning electron microscope (SEM), and thermogravimetric analysis (TGA). The as-prepared nanocomposites were employed for the typical click reactions using the substrates of azide and acetylene. These classes of composite materials can be referred to recyclable, heterogeneous, green catalysts with high atom economy and could also be used for the isolation of click products in biomolecules.     

微波法合成乙二醇插层镍铝层状双金属氢氧化物

乙二醇(EG)插层层状双金属氢氧化物(LDH)可作为层间催化反应器,用于原油中环烷酸与EG的酯化脱酸反应,但其合成过程需要较长时间。 以硝酸根型镍铝LDH为前体,在KOH促进下,采用微波辅助的离子交换法合成EG插层LDH,省时节能,提高效率。 考察了微波时间、微波温度和微波功率对EG插层LDH结构的影响。 并用XRD、FT-IR和TG-DSC等比较了微波法和常规方法合成的EG插层LDH的性质。 结果表明,微波辐射能提供高能量,促进待交换阴离子向层间的扩散,并减弱层板与层间原有阴离子间的作用力,在微波温度为120 ℃,微波时间为10 min和微波功率550 W的条件下,即可得到结晶度高的EG插层LDH。 微波法合成的EG插层LDH与常规方法合成的具有相似的性质和更高的结晶度,而合成时间可由12 h大幅缩短至10 min。     

纳米贵金属插入的粘土用于催化选择性加氢反应

 The use of clay minerals in the synthesis of nanosized noble metal particles to give increased catalytic activity was investigated. Nanosized platinum and ruthenium catalysts intercalated in clay (montmorillonite/hectorite) were synthesised and their catalytic activity was evaluated for the selective hydrogenation of three different α,β-unsaturated aldehydes, namely, crotonaldehyde, cinnamaldehyde, and citral, in a gas phase microreactor. The metal nano-sol was prepared by the chemical reduction of its precursor by the micellar technique in the presence of cetyl trimethyl ammonium bromide (CTAB), and the micelle stabilized metal particles were intercalated in the clay mineral by ion exchange. TEM micrographs of the catalyst particles showed that the metal particles were in the nanometre range. The average diameters of the particles were 1–25 nm. The effects of temperature, metal loading, and hydrogen flow rate on the catalytic activity and selectivity for α,β- unsaturated alcohol were studied. The results were correlated with the structural properties of the catalysts. The products formed in each reaction over the different catalysts showed that the catalysts were very active for hydrogenation, and the selectivity for the desired product, namely, α,β-unsaturated alcohol, was good. The metal catalysts intercalated in montmorillonite showed better selectivity than that in hectorite because of its higher acidity. Increased selectivity for α,β-unsaturated alcohol was observed with increased flow rate of hydrogen.