Adsorption of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) and related compounds onto montmorillonite clay

Sodium montmorillonite clay (Na-MMT) was modified using 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS). The objective of this study was to determine which chemical group is the 'driving force' leading to the adsorption of AMPS inside the clay galleries. AMPS has been reported to be a good candidate as a clay modifier for the preparation of polymer-clay nanocomposites by in situ free radical polymerization in emulsion. However, the way in which AMPS interacts with the surface of MMT has not yet been studied. The type of interaction between organic modifiers and clay plays a determining role in the successful preparation of polymer-clay nanocomposite materials. The adsorption ability of three other organic compounds similar to AMPS, namely sodium 1-allyloxy-2-hydroxypropyl sulfonate (Cops), N-isopropylacrylamide (NIPA) and methacryloyloxyundecan-1-yl sulfate (MET), was also evaluated. These selected compounds also have functional groups potentially able to interact with the clay surface (i.e., a sulfonate group, an amido group, or a sulfate group, respectively). Results of FT-IR, TGA and SAXS analyses showed that AMPS, NIPA, Cops and MET all interacted with clay, but to various extents.     

Effects of organic modifications of clay on the ultraviolet‐curing behavior and structure of a polyester‐acrylate/clay nanocomposite system

A pristine clay (Na⁺‐montmorillonite (MMT) and three different organoclays (20A‐MMT, vinylbenzyl dimethyldodecyl ammonium (VDA)‐MMT, and siloxane diamine ammonium (SDA)‐MMT) that originated from the pristine clay were used to prepare polyester‐acrylate (PEA)/clay nanocomposites by in situ ultraviolet (UV)‐curing. Except for the commercial organoclay (20A‐MMT), VDA‐MMT, and SDA‐MMT were prepared in this study by ion exchange method. The effects of organic modifications of the pristine clay on the UV‐curing behavior and structure of the nanocomposite system were investigated. The organic modifications of the clay affected considerably the UV‐curing behavior and structure of the nanocomposite system. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of polybenzoxazine/clay nanocomposites by in situ thermal ring‐opening polymerization using intercalated monomer

A new class of polybenzoxazine/montmorillonite (PBz/MMT) nanocomposites has been prepared by the in situ polymerization of the typical fluid benzoxazine monomer, 3‐pentyl‐5‐ol‐3,4‐dihydro‐1,3‐benzoxazine, with intercalated benzoxazine MMT clay. A pyridine‐substituted benzoxazine was first synthesized and quaternized by 11‐bromo‐1‐undecanol and then used for ion exchange reaction with sodium ions in MMT to obtain intercalated benzoxazine clay. Finally, this organomodified clay was dispersed in the fluid benzoxazine monomers at different loading degrees to conduct the in situ thermal ring‐opening polymerization. Polymerization through the interlayer galleries of the clay led to the PBz/MMT nanocomposite formation. The morphologies of the nanocomposites were investigated by both X‐ray diffraction and transmission electron microscopic techniques, which suggested the partially exfoliated/intercalated structures in the PBz matrix. Results of thermogravimetric analysis confirmed that the thermal stability and char yield of PBz nanocomposites increased with the increase of clay content. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Poly(styrene‐b‐tetrahydrofuran)/clay nanocomposites by mechanistic transformation

Synthesis of poly(styrene‐block‐tetrahydrofuran) (PSt‐b‐PTHF) block copolymer on the surfaces of intercalated and exfoliated silicate (clay) layers by mechanistic transformation was described. First, the polystyrene/montmorillonite (PSt/MMT) nanocomposite was synthesized by in situ atom transfer radical polymerization (ATRP) from initiator moieties immobilized within the silicate galleries of the clay particles. Transmission electron microscopy (TEM) analysis showed the existence of both intercalated and exfoliated structures in the nanocomposite. Then, the PSt‐b‐PTHF/MMT nanocomposite was prepared by mechanistic transformation from ATRP to cationic ring opening polymerization (CROP). The TGA thermogram of the PSt‐b‐PTHF/MMT nanocomposite has two decomposition stages corresponding to PTHF and PSt segments. All nanocomposites exhibit enhanced thermal stabilities compared with the virgin polymer segments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2190–2197, 2009     

Effect of Nanoclay on Styrene and Butyl Acrylate AGET ATRP in Miniemulsion: Study of Nucleation Type,Kinetics, and Polymerization Control

Poly(styrene‐co‐butyl acrylate)/clay nanocomposites were synthesized in miniemulsion via activators generated by electron transfer (AGET) for atom transfer radical polymerization (ATRP). Optimum amounts of catalyst and reducing agent were chosen by considering a linear increase in ln([M₀]/[M]) versus time, narrow molecular distribution, and low polydispersity index (PDI). Critical micelle concentration and cross‐sectional surface area per surfactant head group were determined by surface tension analysis. Calculations show that droplet nucleation is the dominant mechanism of nucleation in a miniemulsion system, and there is no micelle in the system. Gel permeation chromatography was used to characterize molecular weight, PDI, and molecular weight distribution. After determination of appropriate conditions, poly(styrene‐co‐butyl acrylate)/clay nanocomposite latexes were synthesized. Low PDI, narrow molecular weights, and first‐order kinetics of the nanocomposites justify that polymerization is well controlled. Kinetics of polymerization decreases by clay loading. The apparent propagation rate constant (k_app) of polymerization in the case of poly(styrene‐co‐butyl acrylate) is 4.079 × 10^?6, which becomes 0.558 × 10^?6 in the case of poly(styrene‐co‐butyl acrylate)/clay nanocomposite with 2% nanoclay. A decrease in the polymerization rate is related to the hindrance effect of nanoclay layers on monomer diffusion toward the loci of growing macroradicals.     

Gas barrier of polystyrene montmorillonite clay nanocomposites: Effect of mineral layer aggregation

Three polystyrene (PS)/clay hybrid systems have been prepared via in situ polymerization of styrene in the presence of unmodified sodium montmorillonite (Na‐MMT) clay, MMT modified with zwitterionic cationic surfactant octadecyldimethyl betaine (C18DMB) and MMT modified with polymerizable cationic surfactant vinylbenzyldimethyldodecylammonium chloride (VDAC). X‐ray diffraction and TEM were used to probe mineral layer organization and to expose the morphology of these systems. The PS/Na‐MMT composite was found to exhibit a conventional composite structure consisting of unintercalated micro and nanoclay particles homogeneously dispersed in the PS matrix. The PS/C18DMB‐MMT system exhibited an intercalated layered silicate nanocomposite structure consisting of intercalated tactoids dispersed in the PS matrix. Finally, the PS/VDAC‐MMT system exhibited features of both intercalated and exfoliated nanocomposites. Systematic statistical analysis of aggregate orientation, characteristic width, length, aspect ratio, and number of layers using multiple TEM micrographs enabled the development of representative morphological models for each of the nanocomposite structures. Oxygen barrier properties of all three PS/clay hybrid systems were measured as a function of mineral composition and analyzed in terms of traditional Nielsen and Cussler approaches. A modification of the Nielsen model has been proposed, which considers the effect of layer aggregation (layer stacking) on gas barrier. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1733–1753, 2007     

Grafting of polymer matrix to exfoliated montmorillonite nanoplatelets in nanocomposite film cast from soap‐free emulsion polymerized latex and its fortified mechanical properties

Poly(methyl acrylate‐co‐methyl methacrylate) [P(MA‐co‐MMA)] nanocomposite film containing 1 wt % of montmorillonite (MMT) exhibited unusual higher ductility, higher strain recovery ratio after creep, and higher modulus and strength compared to neat P(MA‐co‐MMA) as they were cast from their individual latices fabricated by soap‐free emulsion polymerization. The fortified mechanical properties were attributed to the MgO components of exfoliated MMT nanoplatelets being grafted by P(MA‐co‐MMA) chains as verified by FTIR and XPS spectroscopies, which to the best of our knowledge is the first time in the literature providing the direct evidence for the polymer chains grafting onto the exfoliated MMT. TEM investigation of the stretched nanocomposite film revealed that the microcracks in the nanocomposite film appeared mainly in the bulk region of polymer matrix, implying that the interfacial strength between P(MA‐co‐MMA) and its grafted MMT nanoplatelets was higher than the cohesion strength of P(MA‐co‐MMA). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5891–5897, 2009     

A novel method for preparation of exfoliated UV-curable polymer/clay nanocomposites

The half adduct of isophorone diisocyanate and 2-hydroxyethyl acrylate (IPDI-HEA), as a reactive organic modifier, was used to functionalize Na-montmorillonite (Na-MMT) clay. Unlike the electronic interaction in the conventional cation-exchange method, the driving force for the organic modification came from the chemical reaction between IPDI-HEA and framework hydroxyl groups on the surface of clay. With high degree of organic modification (48%), the d-spacing of clay layer was greatly enlarged to 3.32 nm, and the clay became more organophilic. After in situ photopolymerization among the IPDI-HEA grafted MMT clay, monomers and oligomers, the exfoliated polymer/clay nanocomposites were obtained. X-ray diffraction and transmission electron microscopy were used to detect the structure and morphology of the clay dispersed in the polymer matrix. Compared with the pure polymer materials, the exfoliated polymer/clay nanocomposites exhibited enhancements in mechanical and thermal properties.     

Exploitation of introducing of catalytic centers into layer galleries of layered silicates and related epoxy nanocomposites. I. Epoxy nanocomposites derived from montmorillonite modified with catalytic surfactant‐bearing carboxyl groups

Montmorillonite (MMT) was modified with the acidified cocamidopropyl betaine (CAB) and the resulting organo‐montmorillonite (O‐MMT) was dispersed in an epoxy/methyl tetrahydrophthalic anhydride system to form epoxy nanocomposites. The intercalation and exfoliation behavior of the epoxy nanocomposites were examined by X‐ray diffraction and transmission electron microscopy. The curing behavior and thermal property were investigated by in situ Fourier transform infrared spectroscopy and DSC, respectively. The results showed that MMT could be highly intercalated by acidified CAB, and O‐MMT could be easily dispersed in epoxy resin to form intercalated/exfoliated epoxy nanocomposites. When the O‐MMT loading was lower than 8 phr (relative to 100 phr resin), exfoliated nanocomposites were achieved. The glass‐transition temperatures (T_g's) of the exfoliated nanocomposite were 20 °C higher than that of the neat resin. At higher O‐MMT loading, partial exfoliation was achieved, and those samples possessed moderately higher T_g's as compared with the neat resin. O‐MMT showed an obviously catalytic nature toward the curing of epoxy resin. The curing rate of the epoxy compound increased with O‐MMT loading. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1192–1198, 2004     

Filler effect on properties of “All‐Acrylic” copolymer/clay elastomeric materials synthesized by “in situ” nitroxide mediated polymerization

In this work, we describe the “in situ” synthesis of “all‐acrylic” copolymer (n‐butyl acrylate‐co‐methyl methacrylate)/clay materials at different low contents of raw and modified Montmorillonite (1–4 wt % versus monomer). The cationic 2,2′ azobis‐(amidinopropane)dihydrochloride initiator was used to modified the clay by cation exchange in combination with the N‐tert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)] (SG1) nitroxide to synthesize the polymer/clay nanocomposite via nitroxide mediated controlled radical polymerization. All synthesized materials are characterized by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis and differential scanning calorimetry techniques. The thermo‐mechanical properties of the synthesized materials are also reported. The results show that a decrease in molar masses and/or slight changes in molar compositions of poly (n‐butyl acrylate‐ co‐methyl methacrylate)/clay systems can be balanced by clay loading in polymer matrix, and consequently compensated or masked clay effects on physical properties of obtained materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Poly(dicyclopentadiene)‐montmorillonite nanocomposite formation via simultaneous intergallery‐surface initiation and chain crosslinking using ROMP

Exfoliated poly(dicyclopentadiene) (pDCPD)—montmorillonite (MMT) nanocomposites were synthesized via intergallery‐surface‐initiated ring opening metathesis polymerization (ROMP). This is the first example of in situ polymerization of pDCPD from clay intergallery surfaces using ROMP. Grubbs catalyst was immobilized on the surface of MMT clay modified with vinylbenzyl dimethyloctadecyl ammonium chloride (VOAC), and DCPD polymerized from the clay surface while simultaneously crosslinking to form a thermoset nanocomposite in a one‐pot reaction. X‐ray diffraction and transmission electron microscopy analysis indicated that the resultant nanocomposites exhibited exfoliated morphologies with heterogeneous clay platelet distribution. Conventional bulk‐initiated nanocomposites containing VOAC modified MMT were also synthesized as a comparison, and these resulted in nanocomposites with intercalated morphologies. The differences between the morphologies demonstrated that growing polymer chains from the initiator sites on the intergallery surface of the clay platelets pushed the platelets apart during the polymerization of the intergallery‐surface‐initiated nanocomposites, aiding in the exfoliation process. Compression testing indicated that the intergallery‐surface‐initiated nanocomposites led to improvements of up to 50% in the compressive Young's Modulus, while the bulk‐initiated nanocomposites at the same clay loadings did not exhibit improved properties. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Grafting of montmorillonite nano‐clay with butyl acrylate and methyl methacrylate by atom transfer radical polymerization: Blends with poly(BuA‐co‐MMA)

11‐(2‐Bromo‐2‐methyl)propionyl‐oxy‐undecyl trichlorosilane atom transfer radical polymerization (ATRP) initiator was covalently attached on montmorillonite clay platelets via silylation reactions. The initiator clay was used to polymerize butyl acrylate (BuA) and methyl methacrylate (MMA) on the clay surface. Polymerization was performed in bulk monomer solution or in DMSO. Polymer modified clay was mixed with a poly(BuA‐co‐MMA) matrix. Small angle X‐ray scattering (SAXS) and transmission electron microscopy (TEM) showed that clay modified in DMSO gave exfoliated composites when mixed with the matrix copolymer. Mechanical properties of the composites were studied by dynamic mechanical thermal analysis (DMTA). The results showed that the mechanical properties were improved as a function of clay content, as well with an increasing homogeneity of the nanocomposite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3086–3097, 2009     

Morphological mapping and analysis of poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] and its clay nanocomposites by atomic force microscopy

Atomic force microscopy was successfully applied for comprehensive nanoscale surface and bulk morphological characterization of thermoplastic elastomeric triblock copolymers: poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS) having different block lengths and their clay based nanocomposites. Commercially available Cloisite®20A and octadecyl (C₁₈) ammonium ion modified montmorillonite clay (OC) prepared in our laboratory by cation exchange reaction were used. The phase detected images in the tapping mode atomic force microscopy exhibited a well‐ordered phase separated morphology consisting of bright nanophasic domains corresponding to hard component and darker domains corresponding to softer rubbery ethylene‐co‐butylene (PEB) lamella for all the neat triblock copolymers. This lamellar morphology gave a domain width of 19–23 nm for styrenic nanophase and 12–15 nm for ethylene‐co‐butylene phase of SEBS having end to mid block length ratio of 30:70 and block molecular weights of 8800–41,200–8800. On increasing the ratio of block lengths of the polymer matrix and the selectivity of the solvent toward the blocks used for casting, the morphological features of the resultant films altered along with change in domain thickness. The phase images showed position and distribution of the brightest clay stacks in the dark‐bright contrast of the base matrix of the nanocomposite. Exfoliated and intercalated‐exfoliated morphology obtained in the case of Cloisite®20A and OC‐based SEBS nanocomposites, respectively, is further supported by X‐ ray diffraction and transmission electron microscopy studies. The lamellar thickness of the soft phases widened to 50–75 nm, where the layered clay silicates (40–54 nm in length and 4–17 nm in width) were embedded in the soft rubbery phases in the block copolymeric matrix of the nanocomposite. The marginally thicker width of the hard styrenic phases and slightly shrinked width of the soft rubbery lamella can be observed from the regions where no nanofiller is present. Distinct differences in bulk morphologies of the nanocomposites prepared in the melt and the solution processes were obtained with nanocomposites. The presence of clay particles was evident from the almost zero pull‐off and snap‐in force in the force‐distance analysis of SEBS based nanocomposite. This analysis also revealed stronger tip interaction resulting in highest contact and adhesive forces with the softer PEB region relative to the harder PS region. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 52–66, 2007     

Stereoregular P(MMA)‐clay nanocomposites by metallocene catalysts: In situ synthesis and stereocomplex formation

This contribution reports the synthesis and characterization of stereochemically controlled, as well as crystalline stereocomplex, P(MMA)‐clay nanocomposites using metallocene complexes and alane‐intercalated clay activators. The ligand elimination and exchange reactions involving Lewis acids E(C₆F₅)₃ (E = Al, B) and an organically modified montmorillonite clay were employed to synthesize the alane‐intercalated clay activators. When combined with dimethyl metallocenes of various symmetries, these clay activators brought about efficient MMA polymerizations leading to in situ polymerized, stereochemically controlled P(MMA)‐intercalated clay nanocomposites. The most noticeable thermal property enhancement observed for the clay nanocomposite P(MMA), when compared with the pristine P(MMA) having similar molecular weight and stereomicrostructure, has a considerable increase in T_g (≥10 °C). Mixing of dilute THF solutions of two diastereomeric nanocomposites in a 1:2 isotactic to syndiotactic ratio, followed by reprecipitation or crystallization procedures, yielded unique double‐stranded helical stereocomplex P(MMA)‐clay nanocomposites with a predominantly exfoliated clay morphology. Remarkably, the resulting crystalline stereocomplex P(MMA) matrix is resistant to the boiling‐THF extraction and its clay nanocomposites exhibit high T_m of 201 to 210 °C. Furthermore, the stereocomplex P(MMA)‐clay nanocomposite shows a one‐step, narrow decomposition temperature window and a single, high maximum rate decomposition temperature of 377 °C. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2581–2592, 2007     

Thermal and mechanical properties of syndiotactic polystyrene/organoclay nanocomposites with different microstructures

The fabrication of syndiotactic polystyrene (sPS)/organoclay nanocomposite was conducted via a stepwise mixing process with poly(styrene‐co‐vinyloxazolin) (OPS), that is, melt intercalation of OPS into organoclay followed by blending with sPS. The microstructure of nanocomposite mainly depended on the arrangement type of the organic modifier in clay gallery. When organoclays that have a lateral bilayer arrangement were used, an exfoliated structure was obtained, whereas an intercalated structure was obtained when organoclay with a paraffinic monolayer arrangement were used. The thermal and mechanical properties of sPS nanocomposites were investigated in relation to their microstructures. From the thermograms of nonisothermal crystallization and melting, nanocomposites exhibited an enhanced overall crystallization rate but had less reduced crystallinity than a matrix polymer. Clay layers dispersed in a matrix polymer may serve as a nucleating agent and hinder the crystal growth of polymer chains. As a comparison of the two nanocomposites with different microstructures, because of the high degree of dispersion of its clay layer the exfoliated nanocomposite exhibited a faster crystallization rate and a lower degree of crystallinity than the intercalated one. Nanocomposites exhibited higher mechanical properties, such as strength and stiffness, than the matrix polymer as observed in the dynamic mechanical analysis and tensile tests. Exfoliated nanocomposites showed more enhanced mechanical properties than intercalated ones because of the uniformly dispersed clay layers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1685–1693, 2004     

Atypical transition temperature dependence of poly(N‐isopropylacrylamide) and poly(N‐isopropylacrylamide‐co‐acrylamide) nanocomposites on the content of exfoliated montmorillonites

Exfoliated montmorillonite (MMT)/poly(N‐isopropylacrylamide) (PNIPAAm) and MMT/poly(N‐isopropylacrylamide‐co‐acrylamide) [P(NIPAAm‐co‐AAm)] nanocomposites were fabricated by soap‐free emulsion polymerization. Interestingly, as the content of MMT was increased from 0 to 10 wt %, the glass transition temperature of MMT/PNIPAAm was decreased from 145 to 122 °C, whereas that of the MMT/P(NIPAAm‐co‐AAm) increased from 95 to 153 °C. Although the lower critical solution temperature (LCST) of 32 °C for the MMT/PNIPAAm nanocomposites in aqueous solutions was slightly increased with the content of MMT, that of the MMT/P(NIPAAm‐co‐AAm) was decreased from 70 to 65 °C. A mechanism that the hydrogen bonds between the amide groups of PNIPAAm were interfered by the exfoliated MMT nano‐platelets for the MMT/PNIPAAm nanocomposites and the preferred absorption of acrylamide units to the MMT nanoplatelets rather than N‐isopropylacrylamide in the MMT/P(NIPAAm‐co‐AAm) nanocomposites was suggested to interpret these unusual transition behavior. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 524–530, 2009     

Investigation of Nanoscopic Free Volume and Interfacial Interaction in an Epoxy Resin/Modified Clay Nanocomposite Using Positron Annihilation Spectroscopy

Epoxy/clay nanocomposites are synthesized using clay modified with the organic modifier N,N‐dimethyl benzyl hydrogenated tallow quaternary ammonium salt (Cloisite 10A). The purpose is to investigate the influence of the clay concentration on the nanostructure, mainly on the free‐volume properties and the interfacial interactions, of the epoxy/clay nanocomposite. Nanocomposites having 1, 3, 5 and 7.5 wt. % clay concentrations are prepared using the solvent‐casting method. The dispersion of clay silicate layers and the morphologies of the fractured surfaces in the nanocomposites are studied using X‐ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The observed XRD patterns reveal an exfoliated clay structure in the nanocomposite with the lowest clay concentration (≤1 wt. %). The ortho‐positronium lifetime (τ₃), a measure of the free‐volume size, as well as the fractional free volume (f_v) are seen to decrease in the nanocomposites as compared to pristine epoxy. The intensity of free positron annihilation (I₂), an index of the epoxy–clay interaction, decreases with the addition of clay (1 wt. %) but increases linearly at higher clay concentrations. Positron age‐momentum correlation measurements are also carried out to elucidate the positron/positronium states in pristine epoxy and in the nanocomposites. The results suggest that in the case of the nanocomposite with the studied lowest clay concentration (1 wt. %), free positrons are primarily localized in the epoxy–clay interfaces, whereas at higher clay concentrations, annihilation takes place from the intercalated clay layers.     

Synthesis and Rheology of Intercalated Polystyrene/Na+‐Montmorillonite Nanocomposites

Polystyrene (PS)/clay nanocomposites were synthesized by the emulsion polymerization of styrene in the presence of sodium ion‐exchanged montmorillonite (Na⁺‐MMT), demonstrating that the strongly hydrophobic PS was intercalated into the hydrophilic silicate layers. The nanocomposites were examined by means of X‐ray diffraction, transmission electron microscopy, thermogravimetric analysis. The rheological properties of the PS/Na⁺‐MMT nanocomposites were also studied to exhibit more pronounced shear thinning behavior with increasing clay content.     

Preparation of fluorinated methacrylate/clay nanocomposite via in‐situ polymerization: Characterization,structure, and properties

Novel fluorinated coating containing well‐dispersed silicate nanolayers is successfully produced via in‐situ free radical polymerization of 2,2,2‐trifluoroethyl methacrylate in the presence of vinylbenzyl‐functionalized montmorillonite with different loading. The organic modification of sodium montmorillonite is achieved through an ion exchange reaction with triphenylvinylbenzylphosphonium chloride as surfactant prepared before use by reaction with vinylbenyl chloride and phosphine. The following in‐situ polymerization in the presence of organomodified clay leads to fluorinated nanocomposites with of partially exfoliated and intercalated morphologies, as determined via XRD and TEM analysis. The nanoscale dispersion of clay layers is also evidenced by thermal analysis; a moderate decrease of the glass transition temperature about 2–8 °C compared to their virgin PMATRIF and an improvement of their thermal stability as evidenced by TGA. The wettability of the nanocomposite films is also studied by contact angle measurements with water. The incorporation of organomodified clays not only increases the hydrophobicity of the fluorinated polymers but also improves the surface properties of obtained nanocomposites. Compared the virgin homopolymer, the mechanical properties of the nanocomposites are reduced by addition of organomodifed clay at temperature from 30 to 60 °C, whereas this trend is gradually decreased at higher temperature. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 411–418     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006